Reviews
Fits: KAWASAKI Ninja ZX-636, KAWASAKI Ninja ZX-6R
A little modification is needed to attach the Heat Guard!
Installed on a 2022 ZX6R. The middle pipe itself is easy to install, the OEM exhaust pipe side is installed with a liquid gasket since the OEM gasket will not fit. The silencer side is exacty with the OEM gasket. The bracket to be installed on the body is also without modification and fits with the OEM bolt, but no nut is included.
The problem is that the Heat Guard does not go on as is. The bottom two bolts fit, but the bracket that holds the guard on the top side has a gap of about 1cm on the front side, so I bent the bracket with pliers and installed it.
Sound became louder below 6000.
View detail
Fits: KAWASAKI Ninja ZX-636, KAWASAKI Ninja ZX-6R
Fair enough; quieter than M4GP.
It is on 21MODEL.
The sound from Idling to 7000 RPM is fatter than the OEM lunchbox.
After 7000 RPM, it may be LARGE and the same as the OEM lunchbox? It seems quieter than when I had a straight M4GP tube.
As for the sound change, the characteristics of the Titaniumium silencer seem to have been emphasized more. (More dry high frequencies are emphasized)
As for the sound, I am satisfied.
However, the Bolt hole position on the Heat Guard did not match, as is to be expected since it is made overseas.
We had no choice but to bend the Heat Guard by force to fit the position and set it.
Also, there is no Bolt nut to hold the Exhaust Bracket, so I purchased one at Home center.
Also, both in-outs are thicker in diameter and quite Tight.
It was necessary to slightly widen the exhaust pipe connection with Pliers.
The positional relationship with the exhaust pipe and silencer is the same as OEM, so we are happy to hear that they are perfectly aligned.
Good appearance as it is clean and polished. Welds are messy but clean.
Overall, I can recommend it.
View detail
I like the sound and the look, but the mounting position doesn't fit.
Even with Idling, you will notice a change in sound. The appearance is also better than Earls Gear in terms of parenthesis. (A matter of taste) The price is cheap. However, the mounting position just doesn't fit. I spent a lot of time trying to get it to fit in the correct position, but I gave up. I think it is not a problem of how to assemble it, but I installed it with the exhaust flange and silencer in the proper position and allowed for the gap at the exhaust system fixing part under the car body. View detail
Fits: PEUGEOT Django125, PEUGEOT Django150
Anyway, it's a blast.
Django's Exhaust System is one option.
I contacted Webig and was told that they did not have any examples of installation for the latest model year and did not know if it would work, but I took a chance and bought it.
First of all, if you just install it, it will interfere with the cooling fan case.
Since there is little play, it is barely 5mm wide when installed with adjustments.
You can never do it alone.
I wonder if it is not so noisy when the Engine starts? I test-drove the car.
When it warms up, it's a blast.
It is almost a straight pipe.
I wonder if they changed the spec. since many people who have installed it have commented on how quiet it is on youtube.
An InnerSilencer to be inserted in the middle was machined and installed.
But I guess it still stands out.
Anyway, it is too bombastic as it is.
View detail
Short carbon fiber muffler failure
I was in the market for a new exhaust for my Suzuki SV650 and decided to try one with a carbon fiber muffler for the first time. The kit from Scorpion has everything you need for a successful installation and the carbon fiber looked beautiful with the dark paint colours of my motorcycle. The sound through the short 225mm muffler from the 650cc v twin engine is amasing and I was so happy until the carbon fiber sleeve on the muffler started to discolour from the exhaust heat. Scorpion customer service did look after me informing me there was a defect with the muffler packing and organised a replacement muffler but I chose not to go with a carbon fiber one again. View detail
The weight is heavy, but the construction is good.
It's quiet around the idling area, but when you turn it, you can hear a large single sound. The weight is heavy, but the construction is good. View detail
It was easy to buy, so I just bought it anyway.
I was looking for an Exhaust System for my STREET TRIPLE and this one was so cheap I bought it.Material:It was Stainless Steel, but I was surprised that it was quite heavy. I was surprised that it was so heavy, but it turned out to be pretty cool. However, the silencer band is Material:The Plastic instantly broke on a daily basis. I bought an external exhaust band and installed it. Because it is easy, it is recommended as an external exhaust system for the time being. View detail
subtle
Because the installation pitch is not suitable, it is a little bit large, and when I put the Cell Keto Exhaust System of SCORPION together, the installation of the Exhaust System is also about 20mm short.
I put it on for some reason, but I will never buy it again.
View detail
![Type W Baffle Z038.10050 [Type W Db Killer Z038.10050 Baffle]](https://img.webike-cdn.net/catalogue/images/47514/SCEXDBK24-900x900_TS.jpg)
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, TRIUMPH SPEED TRIPLE, SUZUKI BANDIT1250, SUZUKI GLADIUS650650, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX 1250 FA, KAWASAKI VERSYS1000, KAWASAKI VERSYS1000, HONDA CBR650F, HONDA CBR1000RR Fireblade, HONDA CB650F
It didn't fit
I bought it together with Silencer, but the bend was too tight to fit it
I think the bends are different from the product photo on the screen
I've never heard the Silencer's sound before, so I thought I'd try to make a sound for it in case I had to But
I was able to create the sound I had in mind by processing Small into the included Baffle
It's a classy?TWINSound that's never too loud
View detail
Pay attention to the volume and sound quality
It's going to be a hell of a lot louder
Use it in an environment where there are no volume restrictions
If you don't mind the sound, these items are inexpensive and lightweight
I tried Inner baffle etc. for Normal silencer, but the volume and output characteristics were not good could not be made to a satisfactory Level If you are thinking of removing the catalyst and sound deadening at the same time, you should install the Full Exhaust System Recommendation
Quantity of Pipe:Pair (for Left and Right) The gap between the two was a few millimeters too narrow, and we were finally able to insert it while holding it down with two people It looked more like a design error than a bad accuracy
View detail
Price suitable
There are no fasteners or anything on the exhaust pipe connections as mentioned in other reviews
Fortunately, there was no exhaust gas leak, but is this an individual difference of Silencer?
However, the place where Silencer is fixed is attached to the top of Silencer
I'm a little nervous because it's only 1 pc of Bolt on Plastic
I need to add the exhaust pipe fixing band. kijima 55~59 I'm considering installing an Exhaust Band
The sound is a little louder than the OEM Degree of change
Fingerprints that may have been left on the Silencer when it was packed were found here and there, so it was degreased is mandatory
If you don't like the look of the OEMExhaust System, this is a great product for you
View detail
Fits: YAMAHA Tracer900GT, YAMAHA Tracer900
It's Large weird to install it yourself!
It's installed on the 2019MODEL To Racer 900!
I bought it because I like the design and the price
It was difficult to decide the position of the exhaust pipe
Because the accuracy between pipes is not good, there is a lot of exhaust leakage The liquid Gasket is indispensable The installation instruction manual was also rough It is thought that the shop should ask the person who is not confident
The exhaust sound is just right!
Best of all, Design is the best!
View detail
Screw hole accuracy is ...
Since most external exhaust systems are Carbon or Titanium
Dare to choose the brilliant Stainless. The glaringly reflection of the specular surface is Beauty.
As the caliber is straight with a small caliber, so it's noisy but a good bass feeling berserk.
It is Manufacturer of United Kingdom but perhaps the manufacture is a rebound country
The accuracy of the Screw hole is poor, so even if one of the four holes of the attachment does not work, Screw does not enter straightly
I forbidden to tighten obliquely.
Baffle is so stiff (It will be a safety measure to prevent it from escaping due to exhaust pressure) Plastic hammer hammered with hanghang but the fixing Screw hole did not get too bad with this accuracy.
I finally pulled out with 556 and Pliers.
Do not use Baffle for this Exhaust System, when using the straight, it will be returned to the OEM at the time of vehicle inspection. And maybe you will not use it twice when you return it ...
View detail
Price suitable
Because the holes in the Exhaust Bracket did not match up a bit, we also relaxed the screws of Tandem Footpeg. I think that the bass sounds well in the sound quality. I wonder if it looks outstanding. View detail
There is also a Hydoy station, but the basic design is done. Evaluation will be in the future.
Manufacturer purchased because it was cheap without knowing at all, Manufacturer, UK (ｽｺﾙﾋﾟｵﾝ) It seems like Well Shita manufacturer.
Plus
Correspond properly not only from Parenthesis but also from bottom to top - It is functioning.
(Turning the engine shows that it is a serious product. )
Minus,
The product photo on the net seems a little longer, but the real thing is short.
(There is no consistency between the real thing and the posted photo. I always think this. Please fix it to webike. )
? Baffle is Billville. This sounds quite bad, but wraps Baffle in an aluminum band
It will be solved if you do it so you can respond with buyer's wisdom.
View detail
Fits: YAMAHA FZS600Fazer, YAMAHA FZ6
Sokosoko to the price.
Even with Baffle, the Largeness of the sound is Large.
Whether there is a Baffle or not, I do not see any car inspections.
Volume of Sokosoko with without Baffle. If there is Baffle vehicle inspection is OK.. Well it was not complaining..
It became a great sound than Normal muffler. Such as Cospa like this.
Performance does not change.
View detail