Reviews
Stubborn dirt is useless.
I tried to use it for fixed stains, but one by one on the way
It will not be a waste of time after all.
As for the Motorcycle which maintains normally, functionality is superior so I recommend
View detail
Absolutely necessary, but unsatisfactory
It is used to grab Piston in Caliper.
To grasp Piston pretty well, I grasped it pretty handly,
It is necessary to tighten up Stopper.
The Stopper is stopped at E type retaining ring,
Absolutely blow away. I can fix it, it is iteration.
Also, Stopper 's Bracket is also weak and it will bend.
You can fix this, though - - -.
The overall rigidity is weak for a while.
So this price is too high. I thought that it was a defective item rather than Level.
I want you to make a more solid one.
View detail
MINIMOTOMinimoto Clutch Holder Fook-Type
MINIMOTOMinimoto Clutch Holder Fook-Type Commercial Product No : It is 1900. We purchased TZr 250 for Clutch disassembly. OEM purchased because there was no stock. Especially served without problems. View detail
I bought it for Maintenance around Steering.
Since there are two Motorcycle, Size It is possible to use it steplessly. With the thickness of the moving part, the tool does not enter with the Top Bridge attached. After tightening with this, tightening Nut of Top Bridge was too hard and could not be adjusted easily. Once it was tightened, loosened, tightened, it became in a condition that it was convinced by delicately adjusting it the first time after tightening the Top Bridge.
The tool itself is solid and easy to use.
View detail
The octopus smarks more than imagined
On the EX side it was Large Kimono, but on the IN side I felt quite Small. Valve is also heavy, so I want you to make a bigger octopus a little more.
Because it comes with two types of abrasive, I think that it is good on the Cost side.
View detail
I used it to exchange Brake fluid
I used it for Brake fluid exchange of GLADIUS 650400.
I thought that I could loosen the Breather and pour out with a syringe, but Fluid did not get out well just by pulling Piston.
After all I took out Lever and pulled out.
There is hang in usage - - -
View detail
Fits: HONDA monkey, HONDA Monkey R, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Monkey R, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It was saved. ♪
Spring of GEARShift spindleArm broke, Pulley Holder (Φ6~Φ12) I bought it with ♪
Without this tool, I was very saved because I can not leave other Parts hurt absolutely ♪
View detail
Watch Impre
I watched Impre, I decided to buy it as a reference.
Good feeling because it can be used for Clutch exchange and Outer Rotor exchange.
Whether it's a little expensive or not.
I just pray that it will not break afterwards.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Watch Impre
I watched Impre, I bought it for reference and saw it.
Very easy to use, I'm very happy.
For those who are considering purchasing, I'd recommend that.
I think that it will not break easily.
View detail
Not bad, but - -.
I was satisfied with the performance, but I wanted Case and the point that I thought it was good if I had a gold tool or string to fix it when hanging the equipment. After ordering, with Case of other Manufacturer in Oku 9. I regretted a bit for seeing it sold at 8K. View detail
I used it for the first time!
I tried to decompose the Head of APE.
Valve spring compressor was used for the first time, so we can not compare with other products, but Valve could easily Rose.
Since Attachment comes with 3 types, I think whether it can correspond to various heads.
First of all, the price is cheap for beginners became the deciding factor of purchase. It will be used for assembly this time.
View detail
Good for using for the time being ....
Although Cost is cheap, it is attractive that it is cheap, but because Firefox moves, it does not engage well and it is not easy to use. It is convenient to use for a while because I wanted to use the adjustment of Rear suspension of XL 1200 C SPORTSTER 1200, but if you know the Size to use, it would be better if you purchased that Size's.
However, because it is not a frequently used tool, I think that this Cost is a good product if it can be used widely. In my case, I do not even know Size and I did not like it if I could not use it after purchasing, so I bought such a worried one.
View detail
Usability is good
I tried it with Rear brake.
Although I managed to replace it somehow, it took a while because I went long without cutting Hose.
I thought it was easy to use.
Next time I will shorten Hose and I will do Front.
View detail
I bought it at a price
I thought about buying it by looking at the opportunity from before
Previously I was listing products from other Manufacturer
I found this item this time and purchased it because the price was cheaper than the previous one
Because I have not used it yet - - -
View detail
Inexpensive and easy to use
Originally I had octopus and Compound, but I stayed for about 5 years
The octopus rod Suction Cup has broken.
After all, "I had not done many times in my life", so I thought it wasted and threw it away.
After that, SmallEngine Displacement Volume 2 Valve replaces an octopus with a suitable bar, Double-sided Tape and Alumina powder.
Even this was enough, but when it comes to grabbing 4 Volvex 2 Head
As expected the Double-sided Tape is tight. After all I got lost and bought this set of KIJIMA
Was.
The general circulation octopus is Universal which is made abroad, but this of KIJIMA is KIJIMA original
is not it. The handle is slender and easy to handle. Suction Cup part is sucked well and good!
Truly a former Grip Bar shop, it looks like there is no need to break in a few years.
Compound is just right amount. Even if this small amount of people is a normal person it will last a lifetime
I can not finish it.
I highly recommend it..
View detail
Clutch and centrifugal filter required for desorption
It is necessary for detaching Clutch and centrifugal filter
When using this item for Grom, 12. If it is not 7
Since the centrifugal filter Shaft is long 9. Please note that Shaft can not be used in 5
12. Shaft somewhat hits even 7, so I need a bit of hang
You can definitely detach Lock nut!
View detail
It is easy to use.
When I was doing Byte at the service station I was exchanging four wheels of Brake fluid so I was able to go to Smooth surprisingly. Product itself is cheesy, but easy to use. Since the Adapter could not be installed on the Front side, I connected the transparent Hose directly and exchanged the Fluid.
Although it is a replacement for the second year, because of deterioration, the color was brown and discolored.
View detail
It is a Wire injector of necessaries at a Wire Grease up. If there is nothing when there is this, the efficiency of work is completely different. Although this product serves as a two-point stop and it is easy to fix a Wire, especially a
It is a Wire injector of necessaries at a Wire Grease up.
If there is nothing when there is this, the efficiency of work is completely different.
Although this product serves as a two-point stop and it is easy to fix a Wire, especially a Grease leaks than expected, as for a thread type-like Wire, a tip leaks easily.since -- the end of the Injector is stopped with cloth.I think that it will become easier-to-use if it becomes a raw material which fits when it shuts for the raw material in which the Rubber of
Wire fixation is a little softer.
View detail
It is a correct answer in a brand-name product reliable since heard that a cheap thing has exhaust leakage from details, the Kowa energy machine's product was decided on and it uses for a long time.
It is a correct answer in a brand-name product reliable since heard that a cheap thing has exhaust leakage from details, the Kowa energy machine's product was decided on and it uses for a long time. View detail
It is a nail type Universal holder. Since an Impact also carries out Torque management with the last Torque wrench at attachment when removing, the surroundings stop of a Clutch center requires this Type of Holder. If a 1-time limitation
It is a nail type Universal holder.
Since an Impact also carries out Torque management with the last Torque wrench at attachment when removing, the surroundings stop of a Clutch center requires this Type of Holder.
If a 1-time limitation or -- is thought since it is too cheap, anticipation is betrayed and it can use perfectly.When carrying out a Friction-plate addition by Clutch strengthening of Scorpa, it used, but there are likely to be other uses.
View detail