Reviews
It broke, so I replaced it.
Because it seemed to be tame in the Arenki for the FRotor replacement of SRX, Impact Driver + Quantity:I used a KTC 6-socket Hammer and broke it.
I bought this Socket as a refill, and this time, I sprayed CRC first, and let it penetrate by vibrating with Hammer, and left it for a while, and then loosened it, and it came off without difficulty. I may have used it wrong, but I didn't think KTC would break.
View detail
1/2 for Axle Shaft
I use a large socket to loosen the nut of the Axle Shaft, but I only have 3/8 size at home, so I bought this 1/2. This time I bought this 1/2. View detail
Fits: HONDA NSR50, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
To use
I used it to remove the Clutch from my cb750f. It was quite hard, and I managed to loosen it, but the socket side was slightly distorted. Because the frequency of use is also small, I think it is good. View detail
Quantity:1 Set of 2pcs. and easy to use.
Easy to turn and convenient for attaching and detaching Air Valve insects. Regular length and Short Type are available in Quantity:Short type is easy to turn in a small space with your fingertips. View detail
3
I bought it to adjust my SUPER CUBc100's valve clearance.
The tool to adjust the square clearance is good, but I think regular glasses are better as they are hard to turn when tightening the 9mm Nut.
I thought it would take some getting used to.
View detail
I bought a 998.
I bought it. The ease of use is the same as the Filter wrench for domestic use that I have had for some time.
If you're going to have one for docas, this would be it. I don't know of any others.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
I bought it when I was a beginner.
I bought these when I first changed the oil on my motorcycle.
Well, it's not uncomfortable to use.
That may be the best part.
View detail
Wiring of the Handlebar Grip
I opted for the Manufacturer's Professional tools, which I have always bought, because all Manufacturers look the same in terms of shape despite the price difference. Made in Taiwan
It's made in Taiwan, so I was relieved to see that it was made in Taiwan.
Since the Wiring location was mainly just the Handlebar Grip, I was still turning round and round with the Pliers. When I actually used the Wire twister pliers, the work was fast and the finish was beautiful because it was a special tool.
If you don't know how to use it, it's easier to search for the video if you don't know how to use it, because it doesn't come with an instruction manual, although the working procedure is simple.
View detail
Compact
It is thin and effective for use in confined or unangled spaces, and there are many different types of Large Caps on the tip of the Driver to choose from for easy replacement. View detail
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
perfectly normal
A little more machining accuracy would be nice, but I guess that's about it.
When you use it in its bare state, you need a little hang to use it due to machining accuracy issues.
I think that you can use it without a problem if you stick Aluminum Tape etc. inside Cup, adjust the gap and use it if you are worried about it.
View detail
Active in tight spaces
The length and angle of the Compact can be adjusted freely and it is very easy to use in a small space. It is easy to check for oil leaks in hard to see places. View detail
For now, it's an OK tool.
I think it's a tool that you can buy as a missing but not often used tool.
I don't have any problems with it, but there's nothing satisfying about it.
I guess the only thing I can evaluate is Cost performance.
I may repurchase this Manufacturer tool if I have a similar situation.
View detail
I use it for front axle.
I bought it as a tool to turn the Axle when removing and installing the Front Wheel.
It takes a surprising amount of time to turn it around in Ratchet.
With this tool, it is possible to detach and attach to SPIDI.
The Shake Type allows for a final tightening, but I used the Torque wrench, so I went with this type.
View detail
No problem
I bought this tool because I don't get to use it often, but I needed it for Impact.
I was able to use it with no problems.
I've used SIGNET on other tools and it's a great cosmetic tool.
View detail
Reliable Brand
I bought it because I have used it on Other tools.
SIGNET is a great cosmetic company and the quality is very good.
I've never had a defective product.
View detail
Used for Silencer's Rivet
I used it to replace Silencer's Wool.
It is used for the Rivet at the Silencer end. The material of the shaft part is Steel because the material of the shaft part is more stressfully struggled when struggling with the Drill later.
View detail
It's convenient to use with Universal.
You can use it for most size oil filters because it bites into the well to remove the engine oil filter. If you have a hard time loosening the filter, we recommend you to use the filter wrench to loosen it. View detail
Tool standard value
When loosening the lock nut for initial adjustment
I had to repurchase it because I was beating it with a slotted screwdriver and the tip was chipped off.
Originally KTC's Quantity:I bought it as a set and it's not too bad for the price, in terms of accuracy, construction and use.
I've been using it without any complaints.
View detail
Chain Adjustment Essentials
This is the tool I need to change the chain on my MONSTER S21200R. I asked the dealer for the size and he said it was T-60, so I checked the tool I had on hand, but Torque was only available up to 55, so I bought it. I have been using this tool manufacturer for a long time, so I am using it with confidence. View detail
Thick and not suitable for fast turning.
The grip is thick. This thickness makes it difficult to turn quickly and is used infrequently. It is not easy to turn the tool quickly. The Grip is not a perfect circle, so it is easy to use. This tool is used only for that purpose. View detail