Reviews
Fits: Others , YAMAHA SEROW250, YAMAHA TMAX500, YAMAHA RZ250R, TRIUMPH TRIDENT 660, YAMAHA MT-09, SUZUKI RF900, SUZUKI GSXS1000F, SUZUKI GSX-S750, SUZUKI GSX1100S KATANA, SUZUKI GSX-S1000, SUZUKI B-KING, SUZUKI GSX-R750, KAWASAKI zephyrχ, KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ninja250, KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZEPHYR400χ, KAWASAKI ZRX1200
TANAX motofizz tanax Moto fizz Mini field sea
SeatBack is exhibited by various manufacturers, but the reason why we decided on TANAX is that it can be spread out again to increase the capacity, and the beverage folder can be used as a quantity:2pc. This is where the Set is attached. Plastic bottle is used on one side and empty can for ashtray on the other.
Also, about 2 days per night and Quantity:2pc. I think it's great because you can in-back when purchasing souvenirs up to about Set.
View detail
Analog GPS..
I took a risk with this item as the only place to put it was on a non-magnetic metal instrument screen, and quite close to the instrumentation too. Unfortunately this does mean it does get occasional interference from magnetic fields on the bike. This isn't a big deal for me as I mainly just want to know which general direction my bike is travelling when in unfamiliar territory. If there was one thing this compass lacks, that would be a glow in the dark feature; which it doesn't have..hence it's useless when on the move at night. View detail
Ideal for 1 night/2 days touring
I purchased this bag to go on a 2 day/1 night Touring trip. It looks and functions well, and the capacity is the perfect size for a 2-day/1-night touring. I am very satisfied with the bag, as I can expand the SIDE to hold my souvenirs on the way back home. It can be stably attached to the CarvingGelCase, also by Tanax, so there is no gapping. View detail
![Tire Pressure Sensor (Front/Rear) [for AIO-5Lite]](https://img.webike-cdn.net/catalogue/images/128410/SRS-002_01_TS.jpg)
Fits: Others AIO-5 Lite
Air pressure and temperature can be checked at all times for peace of mind!
It looks Large and a little awkward.
The air valve is sideways mounted, but it may hit the caliper if the gap between the caliper and the car is too narrow.
Compared to the regular Air Valve Cap (1 Gram), it is a little heavier since it is 7 Grams including the Nut, but it is not uncomfortable to ride on (it may be off when measuring Balance?). (Balance measurement may be off?).
SensorBody was easy to install, paired, and configure.
Since I don't always check the air pressure all the time, it is nice to know what the air pressure is at the time. There was almost no difference in the values from the air gauge I had on hand.
It is also reassuring to know the Tire temperature, especially in winter.
If you are going to install the high-performance SMARTRideMonitor, it is recommended to install the Air Pressure Sensor together with the SMARTRideMonitor.
View detail
Automatic Navigation display if you have a smartphone!
I bought it because I Mounted my phone and often heard that it was broken by vibration.
The maps are easy to read with Apple car play. The LCD screen is bright and super clean. It is easy to connect as long as you have your phone with you, without having to operate it every time.
DisplayBody is easy to see if it is large enough, but not too large, so this is just right.
It is easy to install for cars with side cowl.
The Camera has a good reflection, but it is a bit on the large side.
Even in this short period of time, they seem to be updating the system frequently. Since it is quite expensive, I would appreciate it if System becomes easier to use and can be used for a longer period of time.
View detail
Convenient
The operation is more convenient than on my phone and the Google map display is good, so I am satisfied with it.
The blind spot detection is very responsive, so it frequently detects them on the highway as well as in town driving, but it's good for alerting people.
The concern is that the threshold of the air pressure sensor is the same for front and rear, so care must be taken if the air pressure differs between front and rear models.
View detail
wonderful (e.g. of a meal)
I have not used it on a rainy day, so I don't know how it works, but it is easy to see the Camera before and after. View detail
Thin and just the right Large size Display
Large is good, and the screen is bright and easy to read.
Synchronizing with a smartphone is also easy.
It was an installation, removal of the drareco.
And installation of AIO-5 Lite.
Wiring was not too long and easy.
I had a hard time connecting to Wi-Fi.
Wi-Fi 2.4G band from Body is poorly connected when affected by other devices.
I think this is because of my environment.
Durability is not yet known,
View detail
![LCD Protective Glass Film [for AIO-5Lite]](https://img.webike-cdn.net/catalogue/images/128410/SRS-007_TS.jpg)
Body is expensive, so it is safer to put it up.
Since Body is quite expensive, I bought it just in case.
The large size is Exactly because it is a dedicated product.
There is no specific Instruction Manual.
There is no installation Guide or anything like that, so after locating the Large body, you just peel off the Seat and take a shot without thinking.
I was nervous, but it stuck well without any air bubbles.
I put on the protective Seat before installing the Body, so I do not know how the sensitivity of the LCD Touch panel on the Body has changed, but it responds properly.
Since the price is about the same as the LCD protection GlassFilm for the phone, it would be safer to put it on.
View detail
Fits: Others AIO-5 Lite
Neither good nor bad
Installed at the same time as SMARTRideMonitorSRS-001.
Or rather, it is a product with Monitor.
To install, simply screw it into the Valve cap.
There is nothing difficult to do.
The Monitor displays Tire air pressure and temperature.
A warning will be displayed if the pressure is less than the set pressure value/Large.
To be honest, the TPMS I used to use has more functionality than that, such as being able to set air pressure in the front and rear Tire and check it on my phone.
Well, since we have SMARTRideMonitor, I will use this one.
View detail
Expectations for the future.
Saturday, December 2, installation.
Installation can be done by an individual if he/she is able to take out the ACC power supply and handle the Wiring.
Just installed, so not sure how it will be used.
The image quality of the appleCarPlay connection and DriveRecorder looks good.
However, the initial setup (connection to the smartphone) was surprisingly difficult.
The Body is not likely to be easily removed (wiring and special tools required), so it is unlikely to be stolen.
However, leaving it on all the time is not good for your mental health….
Maybe blindfold them with a Towel or something.
Up-dating of Farm Wear is possible, so we are looking forward to the future.
View detail
For those who are concerned about scratches and dirt on the helmet
[How is it used?
I have a helmet holder next to the rear tire,
I am concerned about dirt and scratches on the Helmet, so I used this one.
Was the one you received as per Image?
As per Image, although I was wondering about the Coil type Wire one,
Emphasis on Refreshing when stored.
Was the installation difficult?
Remove the two screws from the lever holder and use the screws provided.
It's easy to reapply.
How was your experience with it?
Just put the Wire through the Helmet and place it on the Tank.
So it is easy to use. No need to carry a key.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not to say I'm disappointed, but when I put away my Wire.
Slightly difficult to wrap around
View detail
Fits: BMW F800, HONDA CB1300SB, HONDA CB400F, HONDA NC700X, KAWASAKI Ninja1000, KAWASAKI Ninja400, KAWASAKI ZX-14R, YAMAHA MT-07, YAMAHA YZF-R25, Others
Standard Large capacity
Installed on klx230sm.
It is still safe to have a Side stay for installation.
The type opens from the side, so it is good that there is no interference even if the Rear back is mounted on top.
Fixing the system requires some ingenuity depending on the type of car, but I think the only way to do that is to devise a solution for each individual car.
View detail
I would like a little Pocket.
It has just the right amount of space for a Puncture Repair Kit, rechargeable Compressor, pigskin gloves for work, Wallet, driver's license, Tissues and other small items without expansion.
There is still enough room for two Touring mapple books.
I have not used it in its expanded state, but it has a large sturdy capacity for a day trip touring to a short distance, even if you put a raincoat in it.
When I go on a full-scale touring trip, I will install a separate TrunkBOX and put everything but my wallet and driver's license in it, so this bag will be enough for shopping at the places I stop by.
If possible, it would have been nice to have a Coin Purse or a Small Pocket to hold tolls, tickets, etc.
I have it on my GSR250 and it is just the right height to rest my arm on while waiting at a traffic light.
It may be disturbing when extended.
Also, I am not worried about Magnet gapping at high speeds, but it may be better to give up leaning forward.
It is quite a nuisance, so I will keep one of the Smallest Tank Bag and use it according to the situation.
Touring while looking at Navigation on a cell phone or tablet is fine, but it is fun to drive while looking at a map and getting a little lost, like this.
For those who run at night as well, it is also recommended to buy Small Light and attach it to Fastener.
At any rate, I also popped in Touring mappleR.
View detail
Glad I bought it.
I decided to go touring for the first time in a long time, but I couldn't find a fixed Belt. This is a typical symptom of a four-letter Alpha bet!
It's nice that Webike has these products in stock and delivers them immediately. It is very helpful.
Was the one you received as per Image?
It is as per Image.
Was the installation difficult?
There is a loop, so you just wrap it around a good spot on the car body and connect it once the bag is loaded.
How was your experience with it?
It is convenient because it can be removed by simply snapping it off.
I don't think it used to have it, but it has Velcro to wrap the excess Belt.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I will try not to lose it this time.
View detail
very good
Very good ?? easy to use! Recommendation around! View detail
Universality seems high.
The item is designed to be used for many types of cars, since it is co-tightened by using the screw for assembling the lever holder.
However, if your motorcycle has an Upper Cowl, you need to make sure that there is no interference with the Cowl. On my Motorcycle, the Clearance was only about 1cm when I cut the Steering to Left.
The length of the wire is also sufficient, and there is enough room even if I put the wire through the helmet after putting it under the Top Bridge as recommended by the manufacturer.
Since I chose Straight Type wire instead of Coil, I felt it was a bit cumbersome to wrap the wire around the bracket when storing it, but I think this is a Level that will become less of a concern as you get used to it.
View detail
best cup holder
I've been riding motorcycles for about 10 years, buying and selling them many times.
This is a cup holder item that is always required.
It is light, sturdy, and has an excellent design.
Tanax is the origin of most cup holders sold in Korea.
In the photo, I mounted it on Ct125. -------------------------------------------------- -------- While riding a motorcycle for 10 years, I bought, sold, and sold it several times It is a cup holder item that is always required. Light, sturdy and design is excellent. Most of the cup holders sold in Korea are Tanax. The photo was mounted on CT125. Powered by Google Translator
View detail
To increase capacity when the need arises
The mesh is so fine that I don't think the luggage will fall out.
I was not sure about the large size, but it can be adjusted by attaching hooks in the middle without hooks on all four sides, so I think a slightly larger size is fine.
The rubber part is also firm and does not seem to deteriorate over time, so I think it can be used for a long time.
The Hook itself is also covered, so it is not likely to cause any damage to the motorcycle.
View detail
Is good
I bought this for fixing the Rear bag when doing RonTwo.
This is a Type that is co-tightened with the License Plate.
Easy to install and use with no problems.
View detail