Reviews
Fits: HONDA CROSS CUB, HONDA SUPER CUB110, HONDA glom, HONDA SUPER CUB 50
If it's the right size.
Used to remove the Outer Rotor on a BANDIT250gj74
Size and Pitch will fit, but it will come off if you prepare a longer one or if you devise a little method because the length of the bolt is short.
It was pretty hard, but I was able to get it off without breaking.
View detail
It's not something you'll use more than once, which is enough.
I was trying to replace the Generator that was no longer generating power, and at the same time, I was trying to replace the StarterClutch that was showing signs of slippage poof.
I bought it because I needed to detach the Magnet rotor.
The price of the Kawasaki OEM SST is too high, so I made an Adapter for this Fly Wheel Puller to fit the Pitch.
It is important to use the air impact to turn the car all at once and to degrease the crank end thoroughly when assembling it.
The texture of the tool was not particularly cheap, and the normal hardened tool steel was used with no problems.
However, considering the fastening torque, I don't think you should think of it as a tool that will last forever once you buy it.
I wonder if I should buy a new one after 3-4 uses.
View detail
Even if it's used infrequently.
I bought it along with the Bore up of SUPER CUB. At first, I struggled to see if I could not manage the tool I had on hand, but as a result, I should have bought it from the beginning. I thought.
Recommendation
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
People who remove the Flywheel are required to do so
The idea of removing the flywheel of MONKEY-type Horizontal TypeEngine Pinpoint is used The frequency of use is low, but if you don't have it, you can't remove it, so it's an essential tool View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
At least it works for now
I used it on a vehicle that was purchased new and is now a year old
There was no rust or anything like that
I struggled a lot
Either the tool will break or the Flywheel will come off
It was a close call
I managed to get it off
View detail
I am satisfied.
I used it in APRIOTYPE 2 when changing the oil pump. I tightened the reverse thread by hand, lightly held it down with the Spanner, and it came off in an instant with the Impact wrench. I don't use it often, but I think it is a good tool to have. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Unsuitable for adherent flaho
I used it to remove the flywheel from my 30 year old Motorcycle and it was easy to use It's not good
One thing that is not so good is that the Handlebar, which is the part to put the force, is screw shaped and It is the point that it is not possible to work with force, such as biting the Pipe
You might be able to use it for a non-adherent flaho, but remove the flaho when it's not sticking in the first place I don't think there are many opportunities for this
By the way, the Furaho that couldn't be removed by this product came off easily with the OEM tool
View detail
It's cheaper than other products
I am satisfied with the cost performance I haven't compared it with other manufacturers, but it's not used very often It works well enough View detail
not available for wr250r
The body is too long and the Opposite Thread Screw is not long enough please note that it was not available for the wr250r The construction is very solid
I ended up sanding off the outer tube and using it
View detail
Very good
I used it to replace MONKEY's Point and Condenser, and it took a second The Flywheel came off and the Screw is nice and smooth It is easy to use View detail
Safe quality and ease of use
An essential tool to remove the flywheel for the generator replacement process Therefore, I bought it
It is usable, but it often shifts when force is applied Use a special puller to remove the flywheel of YZF because the structure is not fixed firmly was quite a struggle
It seems to be easy if you use it with electric Impact etc., but it's probably because of the Hand tool only It took a long time to change
I'm not sure if the U-type Fly Wheel Holder is more compatible with this motorcycle I avoided it because it was, but it's probably easier to use because it's harder to shift
View detail
Very good item
I used it with XR 100 MOTARD.
Making is good, Bolt part can be turned thrill by hand.
I do not get stuck
Because it does not take up space with Compact, there is nothing to worry about the storage place of the tool box
I think that it is the best as a tool of Pinpoint
Of course, Flywheel was securely removed.
View detail
You can use it even if it is cheap.
I used it for Mission exchange of MONKEY.
Some are expensive, but they are necessary enough.
After screwing the Opposite Thread Screw part into Flywheel, turn Normal Thread Screw until it hit Crankshaft and further Glassesetc. Parkin and Flywheel easily come off if you tighten.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
If you are stuck, it is not a labor force
Used to remove Flywheel of XR 100 MOTARD. Since it is a Special Tools that has no other uses other than this, the frequency of use is extremely low, so I'm grateful that it is as cheap as possible.
In my XR, Flywheel got stuck and could not be removed anyway. In such a case, I would like to go out for a long time by adding a long Wrench, but since I will bend the puller, it is better to stop.
When it is hard and can not be taken out, first attach the CRCetc. Blow and lubricate lubricant easily. Next, in order to change the rotational motion of the Puller to the smooth motion to the longitudinal motion, plenty of Oil is attached to the screw portion. To turn Shaft to Smooth, also apply Oil to the tip.
Doing so, after reducing the rotation resistance, if you exercise your hard-working power, you will be out of the pong.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Very easy to use, it was a good tool.
【What made you decide the purchase?】 There was something used for NS Engine in Impression, so I decided on this. (Because it was uneasy because NSR 50 was not listed on compatible model)
【How was it actually used?】 Handling Instruction Manual was written in foreign languages ??only with illustration, but it was intuitive special tool that showed how to use so there was no problem.
Moreover, the movement when screwing is also Smooth, and it was able to use with confidence with firmly making it firmly in strength.
The purpose of this time is to remove the Flywheel and adjust the advance angle of the ignition timing.
1) Holder which separately prepared fuller Wheel (Red sticky two-piece fixture shown in the photograph, Hiroche : WT 04141 Universal holder Powerful or the like. Fix) and loosen Center nut.
2) Since the Screw mountain of Opposite Thread Screw is cut inside the Center part of Flywheel, screw the Puller Attachment to the full with manual tightening.
3) Fits the Attachment to the attached crosshair handlebar (The narrowest) I have Screw, so I will screw it in (Normal Thread Screw)
4)MONKEY Wrenchetc. If you do not fix Attachment with, it becomes hard from the middle and it will not turn. (Photo status)
5) When you apply Torque to the Cross Handlebar from that state, Flywheel that is so hard is coming out.
*) Flywheel has a little weight, so please be careful not to drop it. After installation, it is completed by tightening Center nut with 5, 5 Kg-m Torque.
Flywheel came off with a single shot without difficulty.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I did not need a translation, but please translate (Please enter here Instruction Manual handling notation included. I did not understand the use of other Screw parts in the cross Wrench.
【Have you compared items?】 Wes BigGarage Fuller WheelPuller Black Type, but since MINIMIKO is a little cheaper it was here.
It is a good tool, you can recommend !!
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Watch Impre
I watched Impre, I bought it for reference and saw it.
Very easy to use, I'm very happy.
For those who are considering purchasing, I'd recommend that.
I think that it will not break easily.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
First time Outer Rotor exchange
Buy for the first time trying to replace the Outer Rotor. Rotor It is an essential tool if you exchange it. I am out of a variety of Manufacturers, but this was the one I chose. I tried using it and used it for Smooth.
There is no turn other than Rotor exchange, but people with Mini bike are essential.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Was helpful.
I bought it to remove GeneratorRotor of CB 750F. With Service Manual, OEM special tool is used, but because it is too frequent to use it, substitute Minimoto's Fly Wheel Puller. The price is also cheaper, Scooteretc. I can also use it, so I thought that I would definitely get it if I think about the future.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
It was used for removing the Flywheel of CB125T. Although a HONDA original manufacturer's product is a price more than double [ this ], the product here can also respond enough. Since it is a Screw size which can use and whose application feels
It was used for removing the Flywheel of CB125T.
Although a
HONDA original manufacturer's product is a price more than double [ this ], the product here can also respond enough.
Since it is a Screw size which can use and whose application feels easy, and is effective also against other vehicle types since there is no element which the
Screw is also minced firmly and licks it, it is satisfied.
If it says by force, since it is a tool (it is troubled even if it is ...) without Yours in haste turn, I will think at what time using for the next becomes.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
This product is what was purchased in order to exchange Flywheels, and since flexibility is also high very in a user friendly manner, it can be used for various Motorcycles. Since it can use for the Mini bike of a Honda system very well, it is convenient
This product is what was purchased in order to exchange Flywheels, and since flexibility is also high very in a user friendly manner, it can be used for various Motorcycles. Since it can use for the Mini bike of a Honda system very well, it is convenient if there is a piece. Although a price is also cheap and being used for a long time after my also purchasing, since it completely broke and does not become precocious, a goods self-object is quite firm goods! Since it can use easily, they are good goods. View detail