Reviews
good on cost
[How is it used?
TZr250R (3XV) I used it to remove the Flywheel of the generator of the "Mere Old Man" because it was rusty and I wanted to maintain it.
The Universal holder is available from various manufacturers, but I don't know the difference, so I chose this product which was cheap.
Was the one you received as per Image?
It is bigger than I expected. I was able to use it as soon as it arrived without any rust.
How was your experience with it?
I inserted it into the hole in the Flywheel and removed the Nut from the Center, but the retention was a little unstable and I wanted another hand.
Well, I was able to remove the Nut safely, so it did its job well enough.
TZr250R (3XV) To remove the Flywheel, you can also use the Puller (https://www.webike.net/sd/152021/) is required (I don't think it has to be YamahaOEM Product)
[Points to note]
Because it is a Universal Product, it is not a translation that hangs firmly, and it is necessary to hold it well so that the Holder may not come off.
I did some good work with my feet and stuff.
How did it compare to other products?
To be honest, unless it's from a Chinese manufacturer that you don't understand, I think it's the same no matter which Large body you choose.
It seems that the shape of the tool is slightly different from that of the tool manufacturer such as Straight, so it may be more stable... though it is expensive.
I thought this product, which was in stock and inexpensive, would be the best cosmetic option.
【Review】
These Items are required to Rose the Engine.
I thought it would be good to consider the one of the tool manufacturer etc. according to the budget because it comes out from various manufacturers.
This product was enough for me because I don't have so many appearances.
View detail
It's just one of those things.
It's not impossible to use, but it was easy to come off because the hook was too weak.
I think it would have been easier to use if there were no bumps in the patches.
View detail
I'm not on much.
I use it to remove the Flywheel on my LEAD 100.
There is a similar product, Band, Belt, or Type, but I would like to use the Pin type which is highly universal.
I chose the
The pin diameter of this product is 5mm and 9mm, and 5mm is just right for fixing the Flywheel of LEAD.
Also, the 9mm one is used to fix the drive train.
I really appreciate the universality of it.
I don't have a lot of time to use it in my daily maintenance, but the Gold price is reasonable, too.
It is very useful to have.
I mean, I can't do LEAD maintenance without it ….
View detail
Convenient to have
Circular objects that used to be removed by various creative ways
This work was high torque, so I bought this one to keep my mind off of it.
If you find a limit that is not slippery, you can turn the large one, though you need a little hang for the degree of tightening for the one that is deformed or broken if you tighten it too much.
I regret that I didn't buy it sooner.
View detail
Necessity of maintenance
Scooter drivetrain maintenance essentials
We can't start without it.
But it's hard to use it for anything else, the fate of specialized tools …
I think I'll use this on Sunday to trade the Weight Roller for the Belt …
View detail
Maintenance essentials!
Scooter drivetrain maintenance essentials
We can't start without it.
KN Planning:KN Kikak
Universal Holder SUZUKI Series
https://www.webike.net/sd/22644793/
I bought it to use at the same time
Easy to use and durable!
View detail
This is a must-have tool for anyone who does maintenance on their engines
It is used for maintenance of MONKEY series Horizontal TypeEngine and OEM Clutch and Flywheel are very useful for fixing rotating objects
However, because of the universal tool that presses down on rotating objects, the tightening torque is When you use this product, you can use it with no problem You can use it with no problem if you degrease it well
View detail
Weight roller replacement
I used it to change the weight roller and it was my first time to do so, but it was done
However, I won't be using it for the time being
As a Sunday mechanic, this is good enough for me
View detail
It's an outside item
I used it to hold up a Pulley on a moped
Please note that this product is an external product
It cannot be pinched like a Stag beetle
No rattling etc. and high quality
View detail
It didn't work, but it's a good cosmetic
I bought it as a Pulley off of co-MAJESTY, but as I feared, the Pulley It couldn't be used because it interfered with the back face fin But it's just an universal product, so it's not the same as the Clutch area It is a good tool to have because it can be used for motorcycle View detail
Universal fixture
I purchased this device for locking the pulleys of a scooter (maxiscuter) when unscrewing the nuts on the variator and torcdriver axles. I'm happy with the purchase! It is a very useful tool for replacing the variator belt. I purchased this device for locking the pulleys of a scooter (maxiskuter) when unscrewing the nuts on the axles of the variator and the torc driver. Satisfied with the purchase! A very useful tool for replacing the variator belt. translated by Google Translator View detail
MINIMOTO Universal Holder
MINIMOTO Universal Holder-A very good tool for locking the bell of the front or rear scooter variator when unscrewing nuts in a garage environment. View detail
It's inexpensive and very useful
I bought this one because I needed it to remove the flywheel from my MONKEY Most importantly, the price was low, so I went with this one
I've used it many times since I bought it and it's really useful because it's so easy to use and doesn't break
View detail
I used it to remove Flywheel.
I used it to exchange Flywheel of LETS 4.
Because it is universal, it seems that it can be used for other car models, but the frequency of use is not so high, so it is a product that can not be said so, it is appreciated if you can suppress Cost a little more.
View detail
Restraint device
In overhauling Clutch of SUPER CUB, a tool to fix Clutch became necessary. There were several kinds of tools to fix, but I chose Pulley holder which is tenacious for the time being
Clamp the Holder in Clutch, rotate the handle and tighten it to complete the set. I was able to remove it easily by putting pressure on Lock nut using exclusive Wrench. Clutch that was immersed in oil can also be fixed without slipping
I found out when using it, but Clutch still moves with just being caught in Pulley holder. So when detaching you must hold down the handle or hook it somewhere so as not to move. Naturally? - ω - `)
View detail
It was able to be used without problems
Purchase for Clutch exchange.
Quality was also good and could be used without problems
The price is reasonable as it is
Because it can only rotate by 180 ° in the attached Lever
I felt uncomfortable with a small car like 4 MINI.
If the tip is hexagon etc. so that it can be used even with Spanner etc.
I thought it was more convenient to use.
View detail
Good product with strength and satisfactory making
I bought it for FORZAMF 08 Drive belt exchange. Although the price was reasonable and there was anxiety about the product strength, it was relieved with firm making to actually take it. We use Impact wrench when removing Pulley but this product is necessary because we use Torque wrench when installing. View detail
It is cheap and a good Holder
Everything that comes from any Manufacturer has hardly changed
I bought the one with the cheapest KN project
Usability can be used together with Pulley face
Of course it can also be used on the Driven side
Because bar sticks are both tightened at the edge and Nut is removed, the part of the bar can be removed
It can be done as needed
Adjustment of the ring part can also be adjusted to 3 stages Can be changed by the butterfly Screw part of the horizontal board
View detail
Used with Overhaul
I bought this engine for Overhaul this time GORILLA Engine. For the tool to be used for 12VEngine to remove Flywheel, since the pickup part can not be used in the tool which was used up to now, it was possible to remove it easily by using the newly purchased Universal holder.
It is mandatory for 12VEngine.
View detail
HondaBENLY50110 Pulley
Honda BENLY 50110! Weight Roller for purchase, purchase! Honda car Scooter can be used in general, has become convenient. I need someone to keep me own View detail