Reviews
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 50, HONDA SUPER CUB70
Dear CUB riders
The CUB has a light bulb that often breaks due to vibration.
This is the fate of a single cylinder engine without a balancer.
This is especially true for vehicles that have been bored up.
I think it's one thing to ask a motorcycle shop to do it, but it's easy to replace the bulb in the CUB, so by all means, keep it in reserve.
I Quantity feel the hassle of buying every single bulb.:I bought it in Set.
This is a complete set, so it's really convenient.
It's cheaper than buying from Single Item.
View detail
Stock for Car
One of the products we carry at Webig that can be used for Car is Valve (light bulb) There is a
This time, SEA BASSJimny (JA2 Helmet2W) I bought this as a spare for my 23 year old Car, so I'm not surprised if it runs out at any time.
I haven't used it yet because it's a spare, but I plan to use it on my SIDE Blinker.
View detail
Get up and walk away.
Used with Ninija250SL
I was unlucky enough to break a Blinker bulb when I was standing on it, so I had to replace it.
It was only One Side, but Quantity:Pair (for Left and Right) I didn't particularly care for the difference in color between the two (although it might bother some people...)
View detail
Fits: その他
Installation was a breeze
It was a simple job to remove and replace the NORMAL bulb.
However, it was not possible to use Normal blinker relay, so I had to replace it with a Relay that is compatible with LED bulbs.
The good thing is that MONKEY doesn't generate a lot of power, so watching BoltGauge, I think it's battery friendly as well, since the power hardly drops.
The brightness is also slightly different.
View detail
Eggplant-type Valve
Used for Blinker.
It is a slightly fat eggplant shaped Valve. No problems in use.
Around Amazon, Valve which converts Socket to LED is sold as it is, but honestly there is no sense of security at all, so I will continue to use this kind of conservative White heat Filament in the future.
View detail
The anti-vibration spec. is a personal no-no.
It's a Double Bulb, but the poor quality ones run out quickly and are useless.
The Pine Stripe ball is an Image that can last about 10,000km.
Lately, there are some that have 3 legs of Filament, because of the anti-vibration Spec. but for some reason, from experience, that one cuts faster. Why is that? ……
This Valve is a normal Quantity:It's a 2pc foot, so I don't have anything to say about it.
View detail
Overcurrent cuts it off quickly.
I used it on my FZ750 tail lamp.
The product itself is made in Japan with no problems.
The problem is in my FZ, probably due to a weak Regulator, which causes an overcurrent situation when fully open for long periods of time, such as Circuit.
When I did so, there was a high probability that the tail lamp went out.
Again, it's not the product's fault, it's my fault for poor maintenance.
But on the other hand, when I changed the tail lamp to LED, it did not turn off even in this state.
In terms of resistance to external factors, LEDs seem to be the way to go.
After this, another part was broken by the overcurrent.
The cause of the problem has been identified and addressed, and there are no further problems.
Overcurrent is dangerous because of the flames.
View detail
I'd like to have one in reserve.
Used in LITTLE CUB for Blinker.
This time we had to replace it after it ran out of bulbs.
I'll have one in case of an emergency.
It's a great price to buy.
View detail
Quantity:1 Set of 2pcs. for a great deal?
I installed it on my Kawasaki ZX-11's Front Blinker.
I bought a car with Position, so I went to Valve of Double Bulb.
When I made the W number less than the one that was originally attached, it became a little high flasher-like, but I don't mind it because I can change the blinker relay sooner or later.
Quantity:1 Set of 2pcs.
View detail
It's cheap
I bought this for Replacement because the Meter Bulb in my 1979 CD125 ran out. Installation and lighting was no problem. 6v is still a net purchase. View detail
How come the light bulbs in Grom go out so quickly?
I bought this bulb as a spare because my Blinker bulbs in Grom went out because of the vibration. I don't have to worry if it goes out any time. View detail
Used in CB50S Restore
I used it when I converted my CB50S to 12V.
No problems and normal brightness.
The Regulator failed and the voltage was so high that it went out immediately, but under normal circumstances it would have worked fine.
View detail
Used in CB50S Restore
I used it when I converted my CB50S to 12V.
No problems and normal brightness.
The Regulator failed and the voltage was so high that it went out immediately, but under normal circumstances it would have worked fine.
View detail
It was cheap
This is a great product. It's a good thing that installation is not a problem, and the broken bulb was fixed, but it's always good to know whether the gold mouthpiece is suitable for the Lamp series, so it would be nice if the type of gold mouthpiece could be mentioned as well. View detail
To the MONKEY!
It was installed by converting from Single to Double socket. Because it is an engine, the engine chica chica chica at idle ring position. I think it is good when it is running. View detail
Stop lamp
I bought it because the stop lamp ran out
It's just a plain, ordinary Valve
It can be used for stop/stop-lamp because it is a Double Bulb
Lately, though, I've been noticing sequential and SquidRing, and these bulbs themselves, like these bulbs It's not often you get a chance to see Valve
This one has a warmth to it, and when it cuts off occasionally, you can polish off the Lens cover and Reflector It's a great motivator and a great opportunity for maintenance
I don't think I'll be going LED for a while
View detail
I'm very happy with the price and it lights up properly
I was looking for a tail lamp bulb of SR400, and Small size was not available I bought this Manufacturer Hit and it was a good price View detail
In the CUB's Tail
The Tail of the CUB that was acquired from an acquaintance did not shine, but Lamp It was out
I'm just saying, check that from the beginning
I bought it at We-Big because they don't have a lot of parallel versions of Double
View detail
photo fraud
I bought it because my tail lamp was out
First of all, there is nothing wrong with the product itself
I know I'm 100 percent wrong, but look at the Top image and see the Large Threshold Size Tail If you can buy a lamp
I misunderstood In fact, it is Small size which is pictured in the image Right Side, and it is attached to the tail lamp I can't
We strongly request that you switch to using Single Item images
View detail
Fits: その他
License Plate Light to LED
Installed on a '95 Kawasaki EX-4
Because the License Plate Light and the Stop lamp are separate bodies, the power consumption is also Large I thought it would be nice, so I'm replacing it
The License Plate Light itself is common to the ZZr400, so it's a good thing that the (Maybe there are other bodies in common.) You can replace it with this unusual G18 bulb
If you remove the cover of the vehicle with a Phillips Screwdriver, the Access It can be done So, remove the white heat bulb that is attached and install the LED's In order to check the height of the Quantity:It is a picture of 1pc. eyes, but it can be installed without any problem The large size of the mouth gold does not seem to be so different
If it doesn't glow, turn it backwards to check the polarity If you can plug it in, it will probably glow (If it doesn't glow, it might be defective.)
All that's left is to assemble it back together and that's it
The degree of brightness seems to be fine
However, since it is a cheap product, Quantity:I stock the other one in reserve as it arrives in 1 Set of 2pcs
View detail