Reviews
There is a LARGE difference between "yes" and "no"!
Installation is easy.
The bracket is a little long, so it feels a little wobbly when you move it, but it's no problem to wear the helmet.
However, it is rather close to footpeg, so you may hit Helmet if you are not careful.
View detail
Not a bad product.
A little difficult to handle due to its low position. View detail
I purchased Repeat
It is installed in the garage as a Helmet Hanger.
It can be easily installed with two wood screws and is strong enough.
It would be difficult to hang anything heavier than the Helmet, but something around 2 kg would be fine. I use Tape to cure my HangerBody and hang my bicycle Wheel on it, and it is just the right amount.
It is very useful for me, because it is important to make the best use of space when I have a lot of things to do.
View detail
Simple and Minimum Helmet Lock Assist
I worked hard to use Wire's Hell lock that came with my new car when I bought it, but this one is one-touch and easy to remove.
I was worried about whether it would fit the inside diameter of the D-can.
Dear Mr. WeBig, It would be helpful to improve the illustration to include the Size of each part of the product in the illustration, so that we can be assured when we purchase the product.
View detail
Convenient to have
It is easy to install and looks like an OEM product after installation.
The Helmet is hidden on the Left Side, so it is good that the Helmet is not visible when taking pictures of the Motorcycle from the Right Side.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
I am satisfied with the low price.
Used for Z-7.
The dimming is unpopular with other reviewers, but we purchased the [Color] The product is Clear, so there were no problems whatsoever, and the feel was comparable to the OEM.
The price is also lower than SHOEI's, so this is the recommendation for those who change frequently.
I'm going to Repeat it again.
View detail
Cool
Used to replace a scratched and tired Z-7.
Mellow [Color] I purchased SmokeSilver.
Although the face is slightly visible from the outside, [Color] It looks better and cooler than Clear.
The visibility is Mirror, but it is not that difficult to see, and you want to be able to see well at night! It is a recommendation for those who want to have good visibility even when driving at night.
Mellow [Color] It's Mirror with Smoke, so it's quirky. [Color] Note that it is inferior to Clear,,
View detail
They are called pachinko balls.
I use this in conjunction with Mirror shield.
From my colleagues at SkinHead because the entire surface is mirrored. It's like a pachinko ball." So I immediately said to him, "I'll be right with you. Your head shines there too♪" I replied as a joke to another colleague who was listening to it. "Wow, you just said that back. I was told that the atmosphere was somewhat strange.
Aside from the futility, for myself, I chose this Helmet not because of the slingshot balls, but because of the STARWARS SpinOff drama, and my admiration for Mandalorian Rearn.
I think Mirror to Shield was a bit too much, Light smoke would have been just right for Mandalo Rear.
Another colleague gave me a mixed reception:T-1000 (Terminator 2), Pep Stripeen, Daft Punk (which I like, so that's okay), Captain Phasma (which I'm kind of happy about), and so on. I was told that I was not a good person to work with.
But I like it so I decided to use it for a while.
The mirror surface is quite gutsy, so a little more staining is needed to make it look like a vintage.
I'm going to wear this, ride the N-1StarFIGHTER, and travel the Silver River I've never seen yet! Make Life a Ride!
View detail
To prevent the Helmet from shifting.
With my previous Helmet, I had a headache due to Gap while Riding for long periods of time, but the Adjustment Sponge has eliminated this problem.
This product is also comfortable on hot days because Sponge absorbs sweat.
The helmet fits snugly and is comfortable to wear, allowing you to concentrate on your riding, which is doubly safe and secure.
View detail
![[Helmet Holder Replacement Parts] Holder Body](https://img.webike-cdn.net/catalogue/images/41401/1_145759949779129800_m_6pk2b_TS.jpg)
Large Helmet holder with hooks
The helmet holder on the OEM motorcycle is small and difficult to use, so we purchased it.
The ENDURANCE:Endurance MultiCenterCarrier shown in the photo was installed because there was a place where it could be mounted.
The large hooks make it easy to attach a helmet.
View detail
Mirror works better than expected.
It was a good decision to Base Mellow Smoke.
Visibility is a priority for Blue (Yellow color vision) so I could run at night without anxiety.
The sun makes the face appear transparent, but depending on the surrounding environment, the Mirror will be in full effect.
I am satisfied with the balance with visibility.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
KITACO Helmet Holder
Installation was quick and easy. Before releasing the bolt, you must remember the original position to hold it in its original position. I bought a high-quality product, so if someone asks, I will highly recommend it. View detail
Keep the Style
If you keep the Tandem Footpeg attached, I think KIJIMA is better, including ease of use.
But if you want to make it a complete one-seater, I wouldn't hesitate to go with Babyface!
It's not easy to use, but you can't change the way it looks!
I am Large satisfied with my choice!
View detail
It was carefully packaged and delivered to SPIDI!
I ordered it as soon as I found it because it is not easy to find. One thing to note is that it is Snap onType, not Bolt On. The Screen that can be attached to this Converter is limited to SnapType. View detail
When attached to Left, ….
I like the look of the Large change.
The feel is that the Dial is small, hard, and difficult to turn.
Also, you can steal it if you remove the Bolt, although you can't put it on right away.
My Motorcycle has a Multi Bar on the Right, so I put it on the Left.
Installation is easy, but I was concerned that the root of the Wire interferes with the Switch box depending on the direction in which the Wire is wound, and that since the Wire is wound opposite to the deFault, the deFault's winding habits are irritating.
Also, in the case of Cowl mount Mirror, the Helmet cannot be hung on Mirror because it is naturally separated from Mirror when the Handlebar Lock is applied. Please be careful if you are going to install it in the future.
I hope it works with the 30 cm long extension Wire I have on hand (it's about 10 cm when looped), but I haven't tried it.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Convenient
It is useful for Tandem or when you have a lot of luggage. View detail
PCX160 8BK-KF47 To Quantity:2pc. SetHelmet in
P.S
Helmet in front is OK with Shield, Helmet in back is upside down, not horizontal but slightly slanted
Put it down, Shield has to be removed, but the current latest PCX (160) 8BK-KF47 To Quantity:2pc. friend of the set
Helmet can be in.
I will upload a photo.
View detail
Maybe it's just my imagination, but it seems to work!
I have been using it for over a year now, and in that time, the inside of Helmet has never started to smell, so I think it works reasonably well.
I own 3 Helmets and use them differently, and I always deodorize each one with this after Riding. Two of them can be washed with the interior removed, but I have not washed them yet. (Don't tell me it's dirty.) Even so, there is no smell. I always put on the helmet after putting on the head cap, so it may be related to the fact that sweat does not penetrate directly into the helmet's interior.
The first, Jet helmet, was purchased with RedCUB 5 years ago and was used year round at first, but about 3 years ago I bought a half helmet for summer use and used it in fall and spring, and about 2 years ago I bought a System helmet for winter use and limited it to spring and fall use.
In other words, the interior washable Jet helmets are worn almost exclusively in the spring and fall when the weather is nice, so they do not sweat much, and the washable winter System helmets are worn almost exclusively when the temperature is cool, so they may not smell as much. Still, the non-washable half helmets are worn during the sweaty season, but they do not smell. This may be due to the fact that the wind does not blow in as much and the head cap keeps sweat out.
The top surface on which the helmet is placed is sloped toward the front, but I feel like the helmet might slide down. The vent is raised, so I don't think it will get caught and slide down...but it would be nice if it were a little gentler.
The body is Type C and comes with a Type A-C Cable.
I always use it at maximum air volume? 3 hours operation, but with a 10000mAh Mobile Battery, I can run it 3 times +/-, which is quite eco-friendly.
View detail
Helmet lock can now be done easily
The Helmet lock of the CT110 HUNTER CUB is very cumbersome to take out the attached Wire from the Tool Box and put it through the Helmet lock Bracket under the Seat. It is also a stress to scratch the area around the lock bracket with the wire.
So when I was looking for a good helmet lock tool, I saw this product introduced in an article on Web!ke, and it looked pretty good, so I bought it immediately.
Installation is simple. Loosen the Oil Master Cylinder fixing bolt on the front brake, connect it to the Master Cylinder with the supplied collar and bolt, and fix it to the handlebar. The wire is then connected to the other side of the handlebar. (Front side of the vehicle) Through it, it will not get in the way when driving.
To lock the Helmet, simply place the Helmet on the CenterBasket and lock the Wire through the Chin guard. In addition, the Smartphone Holder is attached to the Adjustable Mount bar of ZETA by the Left Side (Clutch Side) But when I cut the Handlebar to Left and lock the Handlebar, the Smartphone Holder interfered with the Helmet and I couldn't put it on the CenterBasket properly, so I put the Smartphone Holder on the Right Side. (Brake Side) The Smartphone Holder is now mounted on the Clutch Side. By the way, many people have Smartphone Holders mounted on the Clutch Side. (Because it is often operated with the Left hand?) However, we do not feel much inconvenience even with the Right Side, and the charging cable is sufficiently reachable from the USB power supply that is offset on the Left Side.
View detail
They come in handy
Even if it gets wet from sweat or rain, you can dry and deodorize it all together just by leaving it here.
It is likely to show its true value especially in the summer.
It is simple to make, but I feel it is effective.
It is good to have consumable Parts such as Filter so that it can be used all the time.
View detail