Reviews
Spring alone is not an obsession.
Bed collar must be prepared, spring compressor is needed to remove the stopper clip, and service manuals are often interpreted as too loose and easy to remove, but it takes a certain amount of tools. View detail
Fits: KAWASAKI Z H2, KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2
Paint is weak.
Deleted so Mild.
and only events are enumerated.
The packaging was torn and scratched.
I put it on the floor while inspecting it, dragged it a bit, and when I pulled it back to my hand, the paint was scratched.
The paint was discolored by the heat transferred from the Bolt when driving, although it was installed in a high heat area with Bolt.
As the name Armour implies, it is a member of the Gold genus and is hard! The name is true.
View detail
It's the wrong year, so please return and exchange.
The product that came with the order year 11-20 is listed as 8-16 The product is still unopened, so please return or exchange it.
I'm in a hurry, so please send me a Large ASAP!
View detail
Fits: KAWASAKI Ninja ZX-25R
Rapidbike Introduction
Anyway, there are a lot of defects and Trickster doesn't know anything about Rapidbike and is not knowledgeable enough. They have a one year warranty, but they don't admit any defects, so you should honestly stop using them. It's not a Level that can be used as a product.
No matter how many times I re-install it, it still malfunctions, and they charge for the inspection.
You can only buy at a Level where you are prepared for glitches and lucky if you win.
Note that there is no support or warranty if the installation is defective!
View detail
Fits: KAWASAKI ZX-10R, SUZUKI GSX-R600, SUZUKI GSX-R750, KAWASAKI ZX-6R, YAMAHA YZF-R1, YAMAHA YZF-R6, SUZUKI GSX-R1000, KAWASAKI Ninja H2, KAWASAKI Ninja H2
Is this what you think?
The product description says it is compatible with 17-pipe, but the O-ring that comes with it is too small.
The O-ring needs to be replaced or the groove where the O-ring fits needs to be raised.
It fits about 16 pies. The quality is not high, but it is cheap.
View detail
Defective item
I received a defective product and processed a replacement with Service, but I never heard from them.
I have no choice but to fix it myself and use it.
Exhaust System itself is of good quality, but I would not buy it again.
View detail
Fits: HONDA CBR250RR
CBR250RR CarbonStainless Steel for 38PS
When I was about to install it, I found that the intermediate Pipe had a Type that was not inflated.
Probably from FOR Race.
It's a shame because they make good products.
I am requesting a replacement response.
View detail
![Slip-On exhaust IKAZUCHI [For 41ps vehicles].](https://global.webike-cdn.net/photo/impression/9a/9a8610f44335feb9314d71e5962e9de8L.jpg)
An intermediate Pipe was sent to me that was not adapted.
It was fast from the time I purchased it to the time it arrived, and it was shipped in two days. I was satisfied with the quick response up to that point, but when it arrived, it was a big surprise.
The product was well packaged, no scratches, and looked as if it contained everything I needed, but once I assembled it, the middle Pipe and Silencer did not fit together, so I wondered how to put it on or if I actually needed to install it on my Motorcycle. The next day, I asked a motorcycle mechanic friend to help me install it, but the middle pipe did not fit with the silencer. When I asked the mechanic's boss, he told me that the intermediate pipe was different. The part of the middle pipe that attaches to the silencer is not a mountain, it is just a pipe. So when I installed it, it was loose enough that I could hang the attached spring by hand.
When I contacted Manufacturer, they said the intermediate Pipe was wrong, but they said they would send the missing item directly through webike.
So I emailed webike for a return or exchange, but I have not heard from them. I also tried to call them, but there was no sign of an answer. I'm sure they're busy, but this is a high-priced product, so I hope they'll take care of it.
I'll keep an eye on it for a while, but I feel like I've been tricked by a fox. I recommend that you buy from a manufacturer or motorcycle store that has a good aftercare program, not just because the price is low.
View detail
![[Repair / Option Parts] Frame Slider](https://img.webike-cdn.net/catalogue/images/76929/TS-FS-203_01_TS.jpg)
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R3
A notational error?
The R-25 fits models 15-21, but it cannot be installed on models 19-21. View detail
poor (quality)
I bought it with high expectations, but I was concerned about the overall manufacturing marks and
The exhaust pipe also doesn't seem to have the same level of attention to detail as the top manufacturers
Also, once the heat is on, Silencer is tightly addicted to it and cannot be pulled out, so Large Weird
I guess precision is appropriate This doesn't happen with other manufacturers
The Silencer is also new, but for some reason it is dented and cannot be replaced
I don't usually use it because it's embarrassing
This is an exhaust system that only looks like a third-rate manufacturer
It's the sound quality that matters, but it's worse than the OEM and the OEM sounds better during acceleration
The bass in Idling is only increased
It's a fairly quiet exhaust system, so it really just looks like it
It's like a manufacturer that only sells itself because it looks like nothing else
If you're feeling obsessive about everything, you'll find top manufacturers like Earls Gear and SP Tadao is good
The manufacturer's response was also very high-handed and appropriate for the customer's convenience Manufacturer
I don't know if I'll ever buy a product from
View detail
poor (quality)
I bought it with high expectations, but I was concerned about the overall manufacturing marks and
The exhaust pipe also doesn't seem to have the same level of attention to detail as the top manufacturers
Also, once the heat is on, Silencer is tightly addicted to it and cannot be pulled out, so Large Weird
I guess precision is appropriate This doesn't happen with other manufacturers
The Silencer is also new, but for some reason it is dented and cannot be replaced
I don't usually use it because it's embarrassing
This is an exhaust system that only looks like a third-rate manufacturer
It's the sound quality that matters, but it's worse than the OEM and the OEM sounds better during acceleration
The bass in Idling is only increased
It's like a manufacturer that only sells itself because it looks like nothing else
If you're feeling obsessed with everything, top manufacturers such as Earls Gear and Tadao Good
The manufacturer's response was also very high-handed and appropriate for the customer's convenience Manufacturer
I don't know if I'll ever buy a product from
View detail
Fits: KAWASAKI ZX-10R, SUZUKI GSX-R600, SUZUKI GSX-R750, KAWASAKI ZX-6R, YAMAHA YZF-R1, YAMAHA YZF-R6, SUZUKI GSX-R1000, KAWASAKI Ninja H2, KAWASAKI Ninja H2
I can't use the '08 YZF-R6
If it says YZF-R6-18, I thought it would be normal to read that it could be used up to 18 years I think, but I couldn't use it for the 08 YZF-R6 I regret that I should have bought it after measuring it View detail
Fits: KAWASAKI NINJA H2, KAWASAKI NINJA H2R
Image Included Parts : about
I am satisfied with Titanium pipe.
However, the Included Parts : The RadiatorPipe and the stop Clamp are not included, according to the Manufacturer explanation, the attached Hose caused the leakage frequently and OEMHose is used.
Then, please do not put the image, it is confusing.
View detail
Commodity does not reach.
I have ordered from 3 business days so I ordered but never arrive. If there is no stock, it will not be placed without it, even if you contact, there is no reply. What's going on? View detail