Reviews
DAEG's footprint has been tightened.
DAEG's footprint has been tightened.
It's pretty cool, and the OVER Logo is nice and casual.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1100, HONDA CB1300SUPERTouring, HONDA LD 97-03, HONDA CB1300 SF, HONDA X4, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR
It changes the whole look and feel of the place.
The quality of the product is good and the installation was completed without any problems with the Instruction Manual.
Pretty cool.
View detail
Sprocket cover for ZrX1200 DAEG
Makes Parenthesis considerably better!
The Logo on the Over is also quite nice looking.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
BABYFACE (Sato Racing)
About quality and texture cnc aluminum alloy material About the use experience love this look Products purchased together frame plug Installation difficulty One person can complete the installation Cost-effectiveness and comparison with other products Good texture and reasonable price About shipping and packaging tight packaging Any concerns, cautions or advice when purchasing It is recommended to buy raised pedals together, the matching effect is better View detail
It's just a matter of looks.
Aluminum Diecast so you can see Oooh!" It's just self-satisfaction, but the slightest change makes me feel better, just like when a woman wears a new pair of Pierce shoes.
something a little "A sense of tinkering." 5 stars for the ability to produce
Minus one star for the price.
View detail
Aligned with the color of Chain.
I made it Gold to match the color of Chain.
I am satisfied with the change in appearance more than I expected.
View detail
Parenthesis OK
It was troublesome to remove the front Sprocket Cover and clean it every time when doing maintenance on the CRF.
So, I bought this Cover to improve the maintenance performance and parenthesis.
Simple cleaning is easier than before.
I was concerned about that because it is quite bare, but there was no problem at all.
View detail
I bought it for the reverse change, but
As it turns out, it was unnecessary lol.
I was able to reverse Change with the OEM Cover still attached.
Well, it's a little weight saving and looks up effect.
View detail
It is a recommend with a parenthesis simply [ attachment ] and sufficient [ a design ].
It is a recommend with a parenthesis simply [ attachment ] and sufficient [ a design ]. View detail
Mounted on XJR1300C
[How is it used?
This is installed on MainMotorcycle's XJR1300C. Although it is called "C", it is almost the same as the regular XJR1300 and can be installed without any problems.
Was the one you received as per Image?
I had the impression that it was smaller than the Image, but it is by no means a MinusPoint. It is not a MinusPoint. It is much more Anodized than it looks in the Image.
I have a feeling that if it is left in the sun, it will soon tan and turn Brown.
Taking this into account, Silver may be a safer choice, but inconspicuous Black looks tighter.
Was the installation difficult?
It's very easy, as long as you can tighten and loosen the Bolt.
How was your experience with it?
The reason for introducing this system was to improve maintainability.
The Release must be removed each time the Oil Filter is changed, but in order to remove the Release, the Oil Filter must be removed.
The Sprocket Cover must be removed, and the Change Pedal must be removed to remove the Cover.
This was quite tedious, so we introduced this and reduced the man-hours involved.
Shift rodSupport, which is also included in OEMCover, is also included with Bearing.
[Included Parts:were they on?
In addition to the collar and bolt required for installation, a Speed sensorMount and a BlindPlate for years without a speed sensor were also included.
Also included is an Instruction Manual. The Instruction Manual is very conscientious and easy to read and understand.
[Was there anything that disappointed you?
A few scratches are noticeable. It looks as if it was cut and anodized without much surface treatment.
I would like to see a little more prep work done on this moderately priced item, as it will lead to a longer lifespan for Anodized.
View detail
Rear brake air Guide
The name of this item is Sprocket Cover, but the OEM part name is Rear brake Air Guide.
The function would be to cool the Rear brake.
I had to replace it because it was dirty and white and it didn't look good.
Front Fender was also changed to Carbon for better balance.
All that remains is to replace the Rear Fender.
The accuracy was poor for its high price, and installation required forceful hole alignment.
Also, the packaging was messy.
Washer is required to use the original Bolt as it is different thickness from OEM.
View detail
Installed on New Model GSX1300R HAYABUSA
Honestly, it's the look! But now I can clean it from the crevices.
It is a pity that Anodized has a very strong Orange color and WoodStock has a different color, but as a whole, it is a cohesive unit.
The work is done by simply removing the screws from the LeftUnder Cover and Side cowlCenter and lifting the nails.
View detail
Texture Large width up from NORMAL!
Prices are expensive, but Material:The texture is up from NORMAL with Carbon.
My Initial ModelCB is Material:The plastic cover was a reduction in cost, but now it looks much more luxurious.
The weight is not much different, it is light, and there is nothing wrong with it as long as you can ignore the price.
View detail
Firm texture
[How is it used?
Touring (On road, Gentian)
Was the one you received as per Image?
Street Image
Was the installation difficult?
Very simple, requires an 8mm Socket.
How was your experience with it?
Good with no interference
[Included Parts:were they on?
no problem
[Was there anything that disappointed you?
None
View detail
Fits: HONDA CB1100, HONDA X4, HONDA LD 97-03, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
It's neither good nor bad
[How is it used?
No particular problem in use, but needs to be cleaned regularly because of grease etc. on the chain.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
No problem
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It was a good product that was well thought out, even down to the day-to-day care.
I replaced the Sprocket Cover that I had damaged due to my sad carelessness during a previous job. I chose this product simply because it was the least expensive among similar products.
Parts：POSH FaithSprocket Cover
When we checked the actual arrival of the product, we found that a solid Dust cover was also attached, which was a Large change pleasant miscalculation because it prevents the vehicle body from being soiled by the oil that splashes from the Sprocket.
The only thing I don't understand is that the shift pattern is not indicated, and the Instruction Manual states that the car will not pass inspection as is, but the original OEM Product also does not indicate the shift pattern. Does this mean that the OEM Product is being sold by the Manufacturer in a condition that will not pass vehicle inspections?
I don't know the details of the situation, but...
It did not appear to be listed anywhere.
I don't have enough small money to ask a dealer to inspect my car, and I don't want it to be a hassle later on, so I modified it a little to indicate the shift pattern.
The processing content of the notation is just pasting the letters "1N23456" with METAL's in lettering and pouring the transparent hardening resin from the top.
I will also include a photo for reference.
View detail
Very nice and stylish
Is very nice and very clean look, the material design is AWESOME! after installation. Is very easy to maintain your chain which doesn't have alot of screws to access to the chain or lube. View detail
Drive cover
I removed the OEM drive cover from the plastic cover and reused the gold part. It looks parenthesis good! View detail
It's convenient
Installed on a CBR1000RR-R SC82.
Used to prevent chain entrapment.
I think it looks great.
View detail
I was satisfied
I felt that the color was a little too dark.
I am very happy with the product.
After that, I feel it is expensive in terms of cost.
View detail