Reviews
The windshield will be a hell of a lot better
I fell in love with the shape at first sight and introduced it
The height of the Screen is much higher than the standard, which provides a very good wind protection With the standard screen, the wind will hit the top half of the helmet, but with this one, the wind will hardly hit the top half of the helmet is very easy to do
It looks like He's modifying it It gives you a sense of feeling and that's a good thing too
However, installation is a bit of a hassle
The Screw holes are out of alignment, so I had to widen them
The shape of the screen itself does not match with the body of the car, so it needs to be flexed to fit
The shape is good, but the accuracy is not so good
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
ParenthesisIf you're looking for a good screen!
I want to change Screens from OEM to Screen!
If this is the case, I recommend Screen by Zero Gravity
What made you decide to buy?
I was considering several Screens for use in the Race, but I was surprised to find that Screens are It's expensive The same goes for this Zero Gravity Screen
However, the good thing about the Manufacturer is that it is available in a variety of shapes and I chose it because of its color I also chose it because it looks SMART
I've used it on other motorcycles in the past, so I chose this one
How was your experience with it?
This time the Double Bubble Type was installed on the YZF-R25
The reason for the double bubble is because it makes the air flow upwards and is easy to drive (laughs)
It doesn't look as good as other manufacturers' double bubbles I think this manufacturer even thinks about the appearance of the product It's not just about performance
Of course, the wind was generally shutting out when driving, so the effect is GOOD
Was it difficult to install? (In the case of hard parts)
It's not particularly difficult, as we just put it on the same way as the OEMs
What is the point or hang of installation (for hard parts)?
It's easier to install with a well nut, but more importantly, I recommend using a plastic screw and Some well nuts come with a screw of aluminum or something I used to use it on Race, but I used to use Tie Wrap to stop it I used to use it on my Race, but I used Tie Wrap to stop it
[Was there anything that disappointed you?
It wasn't the only time, but it seems that Zero Gravity's Screen has been tipped over I think it is often cracked when I do it I think it's just plastic, but I use it as a consumable
Do you have any wishes or improvements you would like to make for the Manufacturer?
I know it's hard to do, but it would be nice if they could keep the price down a bit more, Sticker and all Because there is none
[Do you have any products to compare it to?
OEM, Screen from ACRYPOINT
[Others]
Unfortunately, the image shows it cracked when it fell over, but I was able to use Tie Wrap for the attachment By doing so, I think that Damage was reduced to the smallest limit
This Manufacturer is a color [Color] Clear、Light smoke、 [Color] If you want to play Race because you can choose in Smoke [Color] I recommend Clear or Light smoke
View detail
Fits: DUCATI 1098S, DUCATI 1198, DUCATI 1098, DUCATI 1198S, DUCATI 848, DUCATI 1098R, DUCATI 1098S
It wasn't what I expected
Speaking of Screen, I thought it would be MRA or Zero Gravity, and it was supposed to be MRA, but the delivery date was I didn't get it in time, so I bought it like a Zero gravity then
Stylish design and a wide variety of products
I'm sure there are many Users who use it, so it must be good
I thought on my own
The packaging of the product was perfect and there was a film on it to prevent any scratches Of course, there are no scratches and I put it on for the time being
The mounting holes are about right, and they go on without a problem
The 848 is an 8mm bolt on the Cowl Bracket next to the Mirror and Headlight If you take it off, you can replace it somehow
And when I checked, I found out that the Right is really sharp
Screen from Front side to Quantity:Pair (for Left and Right) I think that there is little distortion because it is the final tightening from the temporary fixation in alternation, but only the Right Side pops out I have
And the cutting surface is sharp It's a shame because I was expecting it to be a good one
Fortunately, it's a quality that I don't care much about in terms of appearance in the Running Main
Okay, but..
If you're concerned about Styling, you should check it out
It's not pricey, so this is what I thought it would be
[Color] And the color of Smoke is good
The regulating effect is perfect and I'm looking forward to the driving session
View detail
It's exactly what I was looking for
This is a zero gravity screen of various screen shapes and types I bought it to replace the OEMScreen, but I wanted a certain height Therefore, I chose the Double Bubble Type The installation accuracy was good and it was possible to install it without shifting the cowl hole too much
The height is as you'd expect; get down enough to get a fist 1pc.minute between the tank cap and your chest and the wind It can be avoided As for the view when down, the Screen in Zero Gravity is "Inflation molding" It seems to use the same molding method as the airplane window
Maintenance But it is recommended to wipe off the dust first and then wipe it up with cleaner Recommendation
This is true of any Screen, but it's also true of any Screen that has dust and debris on it This is because it is prone to scratches when wiped with Dustcloth Quantity for good visibility:Pair (for Left and Right) I personally use it with that in mind as I think these are the parts that do I am satisfied with the product itself
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
More rectification than expected!
What made you decide to buy?
Looks and Price
How was your experience with it?
Although it is only a few centimeters higher than the OEM, the wind pressure received by the body is definitely reduced and riding is easier It is now
It went from being sticky on the Fuel Tank at high speeds to better with just a little bend
Was the installation difficult?
The Instruction Manual is in English and illustrated, but it is not Just take the OEM and attach it It is not necessary to remove the Mirror in the illustration Re-use the well nut, but it is easily removed
【Please tell me the installation point and hang】
If you peel off the protective tape attached to the shield, static electricity will be generated After installation, be careful of dust and garbage-deposited areas that cannot be cleaned
[Was the Instruction Manual easy to understand?
It was just the English Version notation and illustrations, but it's fine without it
[Included Parts:were they on?
Included Parts:No. You will need to replace the OEM well nut It is
[Others]
There are individual differences in the adherence of Quantity to the Cowl:Pair (for Left and Right) There was a difference in It was a slight Gap with no functional problems, so I use it as it is
[Do you have any products to compare it to?
The Manufacturer's Product Type
View detail
Installation of 4 well nuts only
I think it's about Design from OEM Transparent Screen to Replacement CBR250RR
I'm satisfied with the product itself, and I like how the black color is unified and tight
View detail
I don't think it's a good costumer
In the OEM Light smoke, the front of the car is not good in the prone position when running in the circuit, etc Hard to see
Also some [Color] The smoke and distortions are still hard to see [Color] I searched for a Clear screen and bought this one
Because of my height, I was wondering about the double bubble to get the rectification effect, but CORSA You are correct
We recognized its rectification effect on the highway in Touring
However, Acrylic is thin and has durability issues I changed it to made by Plug now
View detail
Fits: HONDA NC700X, HONDA NC750X, HONDA NC700X, HONDA NC750X
Better than OEM
The wind cutting sound that is a little bit lacking in OEM products has been improved by adding a large texture As a Shield
I chose this product
Installation itself was very easy as I just removed the OEM and installed it directly into the same hole
I felt that the function as a Shield was much less windy than the OEM, but At high speeds of over 80km/hour
I was expecting to hear a lot of wind cutting noise as the wind hit the helmet rather than
It didn't make me comfortable with the fast turnaround
However, if you change the Shield, you are customizing the Motorcycle I'm getting a feel for it
I have absolutely no regrets about replacing it
Also, I would have been happy if the price was a little lower
View detail
It was more than I expected
I chose this product for a little change of pace
When actually installed, there is almost no distortion in the landscape through the Screen, and there is no distortion in the Double The windproof effect of the benefit of the bubble has reduced fatigue
The accuracy of the mounting holes is also very high for a plastic part around the cowl
I'm currently using Pooch's Screen on the ZX10R, but if you're looking for more features, here's a Recommendation
View detail
Fits: HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB
The ease of high speed driving is much better than OEM
With the OEMScreen, the driving wind is harsh at high speed (over 100km/h)
I replaced it because it made my body feel dull
Honestly, the Demerit may be more noticeable to many people in town riding
I was prepared for it, but the wind noise would increase, something I never heard on OEM "Gosh To say
It makes a lot of noise
I think that there is an individual difference in this, but in my case, Chatter sound becomes Large I feel like I've been there
When I was OEM, I was making Chatter noise at about 40 km/h in 3rd and 4th gear, but since I changed it, I've been making 4.5 50 km/hour
The sound is bigger than Chatter sound that was generated at the time of OEM
Right after I changed it for the above reasons, when I'm riding around town Maybe I shouldn't have changed it Oh, my God
I thought, but I changed my mind the moment I got on the freeway
It's much easier to drive fast at 100+ km/h
At the time of OEM, there was quite a lot of wind pressure when maintaining over 100km, so if you ride it for a certain amount of time, you'll be able to get rid of it was heavy and sluggish
But in the case of this Screen, it is the Level that you can afford to maintain even at about 120km
I'm about 5'8" tall and I feel the wind coming at my torso has eased considerably
With this, long distance high-speed driving is not difficult at all
The Demerit mentioned above is no longer a problem at all due to this windproof nature
If you're finding it hard to drive fast with the OEMScreen, you're in for a treat I would like to recommend this item
View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA250
I don't know if this is necessary
Because the OEM Screen is too small, I bought this product which seems to have the highest wind protection effect
It is 7 or 8 cm longer vertically than the OEM
But the width remains almost the same
It wasn't the wind protection effect I was hoping for It works a bit
As a request to the manufacturer, the width is increased and the top edge is moved in the direction of travel
I want it to be warped up to provide more wind protection
Installation is easy
It was easy to install, although I had to insert a buffer-like material between them
As for quality, rounding the corners is a plus, although it doesn't have the fold in like the OEM does
Also, the OEM has a little bit of color in it, but it's really transparent and unpalatable
It's like an acrylic board that's been cut
Color:I wouldn't go so far as to say Gray color, but it would be nice if it had a little bit of color in it, like the OEM
It's a $15,000 product, so I feel it's not cost effective
View detail
It's working for me to the extent that I thought it would
At the time of installation, the shape of the two bolts on the Back Mirror is not a circle, but a circle The Fit feeling is not bad The Screen as a forme after the installation of it, the windproof effect may be higher if the Screen is lying a little more I thought there was none Colors [Color] I went with Smoke, but I wanted it to be a lighter color View detail
It's not so bad, but it's not so bad at all
Before this, I had installed a Screen of the same shape from MRA and then replaced it with this one
It's not particularly difficult to install, so you can replace it in 10 or 15 minutes
The texture is a little thinner than MRA's Screen and I am a little worried about it
It's easy to deform when you push it with your finger But it won't be like Pe LePera when it's running like paper
It is designed in such a way as to prevent the wind flow from hitting Rider's body at high speed
This is very satisfactory
Cost performance is a bit pricey when you look at the texture, but generally speaking, it's not very good or bad Also without
View detail
Purchased for maximum speed Attack and video recording
StraightSpeed at FSW is about 300km/h
We need to block this wind pressure [Color] I bought it for the purpose of having a clear view and also to shoot video
The truth is that "CORSA"or"Marc1"Type It was good, but the GSX-R1000 K6 has a "Double valve& quot;Type was the only one available
I've heard that this type is prone to distortion …
Unfortunately, I seemed to have pulled the HaGap and there was about 3cm of distortion in the Center!
I think you should choose another Type or be prepared to haGap and buy it
(Not sure if it can be returned.)
https://imp.webike.net/diary/168769/
In ActionCamera, it's almost indistinguishable, so it's not a problem for touring video recording No, I don't
We don't recommend it for riders who run the Circuit
Circuit Driving Video
https://youtu.be/vggPqRo6DsA
.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
OEM Shape is my favorite
I didn't like the deliberately protruding double bubble, so I decided to use Orthodox I selected the OEM Type
It was well protected by the tape and packed in a bag, so you can remove the tape after replacing it Screen in Polished is now available!
This time, I chose Dark smoke [Color] Smoke was too dark It doesn't penetrate as much as I expected
If you are considering to use it in a circuit, you can recommend a light-colored type to be used in a circuit It is
But with Dark smoke, it looks squidgy I was happy with this product in my opinion
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Excellent rectification effect
Screen is changed to Large type along with R25 Tourer
I put this product on which looks Simple
I heard it in the rumor, but after all the drilling accuracy is bad The one which has considered purchase should have had the File stick
The rectification effect is extremely large, and the wind that used to hit my chest now hits my mouth (In the case of OEMHandlebar)
View detail
ZEROGRAVITY Screen [Sports Touring ]
The profile is beautiful. The front looks a little longer. The performance of the wind shield doesn't look much differen I wish it were a little longer. View detail
Reliable Brand
Screen is sold by each company, but I liked the comfort and shape I used in other Motorcycle before, so I chose Zero Gra CORSA.
Since there is a height higher than the standard, the rectification effect is high. Is it likable and disliking the appearance.
View detail
Fits: SUZUKI GSX1300R, SUZUKI GSX1300R
Design and effect are bigger than I thought.
It was installed in L7GSX1300R HAYABUSA, the position of the hole pointed out by other people was Exactly, I attached a thing of Clear, but even if I looked in from the inside, the viewing of the landscape is the minimum and it is good to see , Windbreak effect is pretty good, so if you point out the thickness of the product is thin compared to MRA etc. It is casual feeling, Matching of design with the car body is better than the real thing better than the picture of product description, GSX 1300 R HAYABUSA There is no such thing as to destroy Design 's design, I think that it was good to install. View detail
It is as it is
Screen's break is slightly rattling. Rubber to put in the hole must remove and replace the OEM's thing. It takes quite a while to replace it. Still it will appear as it is. Dark smoke is pretty dark. I feel like I can prevent wind than OEM. Although it seems that rattling is not conspicuous too much because the color is dark, I wonder if it was a bit cheaper. View detail