Reviews
Quite good
Even though the installation Bracket, originally one for each for Rightfor Left, must be included, but when I purchased it ... which one was for sure which two for LeftBracket was in and for RightBracket It was in a state not in existence. For that reason, I contacted Webike and got RightBracket sent ... ... etc .. Although there was a sorrowful one, there was reconfirmation that it is a good thing in the middle if installed.
It looks better and it is wonderful to say "It seems to be sturdier" than anything above OEM above anything, so if this is a little or gentle vibration it is Hetchara Hui. License light is also bright with LED, White .......
For those who are sturdy and still looking, I would recommend this. If you correspond to the model
View detail
Angle is bad
I installed it because the OEMFender is running away.
Since machining is unnecessary on the car body side, installation is easy if you understand even how to remove OEM Fender.
After installation, Rear tire looked out from the back, the appearance improved..
However, the angle of Number is a bit too small, and I want to point it down about 5 degrees again.
(Actually, attention was paid to White bye) It may be good if you lowered Rear.
I ran about 8000 km, but there is no breakage or dropping out.
View detail
cool
Compared with some Fender Eliminator, I feel texture, Style seems to be good so purchase.
Large strange as I have to remove a lot of OEM removal, but those who can clear them without problem
I think that it is affordable for installation.
Fender cut and drilling are unnecessary. OEM Wiring to install License Plate Light
It is necessary to install it by Cut, but included in Kit LED Wicing of License Plate Lamp is very thin
Therefore, rather than using the included Bullet Terminal terminal, it is recommended to connect with a connection terminal for fine wires such as Emon.
A person who wants to use Blinker other than OEM structurally considerably devises or does not recommend it because it can not be attached unless the installation position itself of the Blinker is changed to the car body.
Blinker is firmly attached to good people at OEM, Refreshing around Rear and texture is perfect.
View detail
Fits: YAMAHA BirdCity125, YAMAHA NMAX 125 [EBJ-SE86J (2DS2) ], YAMAHA NMAX 125 [2BJ-SED6J], YAMAHA NMAX155, YAMAHA Tricity155
air filter or camouflage exhaust
many people keep asking me the same questions.is this an exhaust or did it has twin muffler. what an air filter whom made people got wrong guessed. View detail
Fits: SUZUKI ADDRESSV125 S, SUZUKI ADDRESSV125 SLIMITED
Pay attention to your car! Parenthesis inject goodness (Lol)
The lowest price among Fender Eliminator products?
I think that the atmosphere changes subjectively though it is subjectivity.
[About the product]
- License Plate dedicated to car models Bracket and Bolt & Nut
Enclosed and the quality of Bracket is also good.
- At first glance it seems to be able to make it myself, but collect materials for similar quality
Thinking about processing, it is definitely better to buy Kit.
- Design is also unpleasant with Simple. I do not feel anything.
【About installation】
- Depending on the car model, Address disconnects NORMAL's Rear Fender
I will drop it.. Surprisingly Material is soft and easy to cut.
- I am an ordinary machine tool Cutter (Large in the middle?) With a cut
It put it in several times and finally cut off the blade deeply.
Even if you can not put a blade deeply at once, like up and down like Quantity : Pair (for Left and Right) To
Instead of stinking, moving the blade in one direction to repeat
The person who does it may cut cleanly.
- We need perseverance so as not to scratch the surroundings.
(Dustclothetc. It would be nice to protect the surroundings)
【About Fitting】
- It is exclusly for car models only and can be installed.
Drill holes in the remaining SIDE's Fender to fix Bracket
It is inconspicuous and simple.
If you follow the instructions, OEM's Reflector will be hidden by half, but it will be anxious
It is not. Here we decide the range to cut beforehand as you like
It's a good idea to keep it..
- Check the angle of Number by adjusting the Bracket up and down according to your preference
Let's tighten and fix Nut and Bolt from.
[After installation / Merit]
- Rear Refreshing in Race ish, finished with a good feeling.
- Considering the angle of Number, casual Large person Spec. !?
- Of course, I feel self-satisfied..
- The car wash around Rear has become easier.
[After installation / Demerit
After all it will be mud when the rainy weather etc..
I attach VECSTAROEM 's Rear Fender,
It can not be changed to AddressOEM.
【Impression】
My car is PetitCustom and I feel better!
Moreover, although I run like my everyday in commuting, there are no defects in the product.
It is only this, but a feeling of special may come out on my car (Lol)
View detail
Large strange
Quantity : We purchased 2 pc and installed 1 pc each on the engine oil inspection window lower side and water pump side. Engine braking became Mild, Shift was also replaced with Smooth and Engine oil (Usually 3000 km) Shift change is Smooth even after past. View detail
Large strange
We already installed several places. This time, I bought it for Front Fork. Anyway, it's easy to install, I think that it is a product that you can experience quickly View detail
Large strange
I installed it in Throttle valve. Especially the ruggedness improved (Some people may be too sensitive) And above all, there is no valley in the low revolution range and I am satisfied with TorqueUpLarge. View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX 125, YAMAHA NMAX 155 [SE86J (2DS2) ], YAMAHA NMAX 155 [SED6J], YAMAHA NMAX 155 [SG50J (BV4) ]
Failed to buy
Purchased with something wrong, it's just Tandem Footpeg. I think that there is also a use as Rear Sets if you can get Position a little further downward, but this can not be used, it will become a tight Position that will remain as a basic Tandem position. I will not talk. Price too high. View detail
Fits: HONDA PCX125 Late Model (JBK-KF12), HONDA PCX125 late model (EBJ-JF28)
Excellent
Very high quality part, built like a tank, no danger of flexing here. Looks fantastic and rides even better than before. The cables and electrical wiring all reach with some re-routing and the fuel hose can also be made to reach, one of the best upgrades I ever made to my PCX. Thanks ADIO and Webike. View detail
Fits: YAMAHA Majesty S (SG28J), YAMAHA Majesty S (SG271), YAMAHA SMAX 13.6- (SG28J), YAMAHA SMAX 13.6- (SG271), YAMAHA SMAX 13.6- (SG28J), YAMAHA SMAX 13.6- (SG271)
It's amazing!
The place where the effect is different depending on the type of car was different. Motorcycle carried 3 cars 2 cars.
Attached to carburetor and Injection. The exhaust sound changes from Idling, the skill improves from low speed, the starting acceleration increases Smooth, Torque increases and it feels strong.
Sas is like being stepped on a carpet, fine movements are effective and an elegant ride is surprised.
I do not remodel it, but I feel like I can not say this feeling that I made a remodeling. It is an invention that changes the history of vehicles.
If you do not properly verify the mounting location, it will not affect this difficult principle, so I think that it is better to ask the PRO how to do it better.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA SMAX (SG52J), YAMAHA SMAX (SG28J), YAMAHA SMAX (SG271)
Processing is Large strange.
Changed from DugoutFender Eliminator to AIO.
Because the position of Number and Blinker's position were ideal for AIO.
Regarding installation, it is a storm of processing and fine adjustment .... It is cool if it is followed and there is satisfaction.
Also, the manual is too much About and the picture is hard to understand with WhiteBlack! It is better to refer to blogs carefully putting on Net and movies attached to YouTube.
Actually installing and processing, Rear Fender's processing is manual duty at Cut as ordered, but I also feel that it is better not to do Cut of Under Cover according to the instructions.
Under Cover can handle Cut only enough for the part corresponding to Number. I feel cut off when I cut it according to the instruction manual. From the back side it's all you want to enter rain with sky ska.
I used the waste material of Cut for the time being I buried the gap ...
This product is recommended for people who are familiar with Custom. Or you should leave it to Motorcycle shop.
View detail
Refresh!
I used it for Air cleaner of MAJESTYS.
As much as Sponge came, I exchanged, but the thickness was completely different between new and in use!
Although washing can be used many times, Sponge gets thinner as it gets thinner so it's better to see and see it. The price is also cheaper compared to OEM Filter!
View detail
BW'S125(SEA6J)
I think that it is a very good product.
It is very convenient when stopping on a little slope.
Parts for the new BW 'S 125 are still few, so it was a nice product to be released.
View detail
Fits: HONDA GROM (JC61) *Not available for MSX of ThailandSpec.
If you believe what Manufacturer says.
Although it was easy to install, is not it OK to choose Exhaust System? I was worried that it would melt past BlinkerLimit in R-EVO of BEAMS.
If this is the case, KITACO, GCraft is better.
Well, since I used it for half a year, Blinker is using it because it is soiled with exhaust Gas, so I am using it, but the exchange is also in the view.
View detail
Fits: YAMAHA SMAX, YAMAHA SMAX, YAMAHA SMAX, YAMAHA MAJESTYS
high.
It is one of convenient Items. Installation is very easy and you get a Parking brake.
I think that construction is good. There is no problem with accuracy.
It is simple but I feel that the price is too high.
I did not want P design, so I wanted to reduce Cost.
Lever in another company has Parking Yes yesterday, but Lever likes OEM so I buy it here.
Except the price ★ 5.
View detail
Fits: HONDA GROM (JC61) *Not available for MSX of ThailandSpec.
Very good tail tidy for the price and much better than the tyga one IMO, I would highly recommend this for the price and quick delivery
Very good tail tidy for the price and much better than the tyga one IMO, I would highly recommend this for the price and quick delivery View detail
Mounting on CYGNUS X
Rear surroundings refreshed.
The manual is small and it is very hard to see.
It is appreciated that we can reuse OEMFender as it is.
Drilling is necessary to install Reflector.
In terms of Cost I think that it may be a little cheaper, but I was satisfied accordingly.
View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
Installation is very easy.
PCX (JF56) I installed the Brake stopper. Installation is very easy, it will not take 5 minutes.
It is convenient something because it does not have to grasp Brake in the traffic lights. I think that it is a good product even with NORMAL.
★ 5 if the price is cheaper a little, but ★ 4 in terms of COSPA.
View detail
Fits: YAMAHA CYGNUS X (SE44J) Japanese specification 1YP, YAMAHA CYGNUS X 02- (SE44J) Japanese specification 1YP
It is convenient to have it
CYGNUSSR (1YP) It attached to.
【What made you decide the purchase?】 Because it was attached to the original moped rice so it was convenient.
【How was it actually used?】 A sense of security at an incline stop location and signal wait increases.
【Was it difficult to install? (Hard parts case)】 It takes time and effort to remove the light cowl and some special screws are used or the nails are hard etc etc. There is, but the work itself is not too difficult.
【Please tell me the point of installation and hang (in the case of Hard parts)】 You can stop using Lever's Bolt, but Bolt did not go into Smooth unless you trim a little bit of Body's corner. (Maybe individual difference as it is slight?)
[Is there anything I was disappointed about?] Currently it is unavoidable that this product can only be installed in CYGNUS, but I think that the price is a little high, although it is not a particularly difficult structure.
【Hope for Manufacturer - Please let me know if there are any improvement points】 When thinking about the price, I think that it is better to use a thicker iron plate for better rigidity and Plating use.
【Have you compared items?】 There was nothing to be attached other than this product.
[Others] Because it is slightly different from 2013 and earlier in type, purchase after confirming the model number well when purchasing.
that's all
View detail