Reviews
Manufacturer logo is ….
Purchased for DL1000 V-STROM250.
We received a logo that was different from the one in the webike photo, but we were not particularly concerned about it, so we decided to use it as is.
I purchased Red, and the actual product is quite bright Red, which I prefer.
View detail
replacement head gasket
I received the full set but only the head gasket was dented. I have write in and Webike was so kind that help me to replcae the dented piece. Many thanks Webike team. View detail
OEM Equivalent Product.
Used on a MAJESTY 125 Restore purchased for $30,000.
It is undeniably just an OEMcarburetor.
but the original carburetor was in pretty bad shape and improved dramatically after replacement.
However, since Motorcycle is an OEM and has quite a few pre-existing conditions, I would not have hesitated to buy a CVK30 or KOSO KVR instead of buying this.
As a postscript, Gasoline started leaking around the acceleration pump while in use early on, so the quality seems to be adequate, even though it is still the same etc. as OEM,
View detail
Disappointing quality
It broke down and the battery was damaged. View detail
Fits: HONDA CBR250RRR, HONDA Hornet 250, HONDA CBR250R, HONDA Jade 250
Seal used for water pump removal
A little thin, but no problem when used with liquid SealPacking View detail
It's not what it looks like in the picture.
The photo shows the Cable coming straight out from the Sensor, but the actual product is L-shaped. I am in a hurry so I will use it anyway, but I was deceived because I was looking for a straight product. View detail
Fits: HONDA LIVE DIO ZX, HONDA SUPER DIO ZX, HONDA DIO ZX
Brake Lever Set
Brake Lever Set Do you like the texture?
The angularity makes it a little uncomfortable.
View detail
problem-solving
I had a problem with the stop-lamp switch for my diverted rear sets that I made myself, but this product solved the problem. View detail
Garbage
The lens is dirty looking with a lot of small pieces of garbage like chips on the inside of the lens, and the plating on the reflector is also covered with a lot of garbage.
With this level of quality, you will not regret purchasing OEM Parts, even if they are a little more expensive.
It was truly a cheap buy, and a bit of an expensive learning curve.
View detail
Fits: HONDA PCX125, HONDA PCX150, HONDA LEAD110 EX, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50 G, SUZUKI LETS4 Basket, SUZUKI LETS5, SUZUKI LETS5G, HONDA SUPER CUB110
Don't buy it.
Installed on JA07 → flicker light for 5 seconds → then nothing → disconnection confirmed
[Don't buy it.
View detail
Fits: YAMAHA XMAX250, YAMAHA XMAX300, YAMAHA XMAX300, YAMAHA XMAX300
If you hear a strange noise when starting, watch out.
I installed it on my X max250 that I use for commuting and it has traveled about 700 km.
When I started the car, I heard a strange "goo”" noise, so I lowered the car and found that the Clutch Shoe was covered with wounds in places where it should normally be smooth and smooth.
It was the 38th day after purchase, but 30 days had passed since the product arrived and I could not discuss the problem.
Maybe you happened to run over HaGap, but it still recommends OEM Product.
View detail
Fits: HONDA CBR250RRR, HONDA CBR400RR, HONDA CBR250, HONDA CBR400R, HONDA VFR400, HONDA CBR500R, HONDA CBR500R
Parts bought for Spare
I have not installed it in use, but I think it will be fine as long as the mounting bracket inside the Light is the same as the OEM one. View detail
Some of the items are in the picture but not included.
I am a little disappointed that the Screw, O-ring, and Needle Clipetc. shown in the picture were not included, although it is nothing to be concerned about since they are not Large. View detail
Thank you for the help
I was able to install it on a LIVE DIOZX AF35 Initial Model.
I am glad I was able to fix it because it was the first Motorcycle I bought in my life and I have a lot of feelings for it.
It really helped us because OEMs are out of business.
Symptoms that did not generate power were cured perfectly.
View detail
I got out of Setting with ease.
Vehicle used HondaNS1 first half 68.8Bore up vehicle
I bought this carburetor after having a hard time finding a Setting with the PE24 Carburetor. I got the best Setting that day.
I think there is a difference in each vehicle, but Slow Jet 52, Main Jet 110, JetScrew is at the smallest aperture close to OFF, and Jet needlePin position is in the middle. I was satisfied with this setting because I was not looking for such a high speed, but the limit value of 100 km/h was reached on a flat straight line where there is no restriction by law. In addition, the external material for PWK:AluminumIdle Screws and Air Screws are available in Quantity:It is possible to set, but it would be better not to do so. The external Idle Screw was clogged with gold fragments due to rubbing, and the external Air Screw had no O-ring and the adjustment screw was in the wrong position, making adjustment unstable due to 2-dimensional air intake. As a result, the needle included from the beginning is the best and most stable rather than focusing on appearance. [Color] The ClearFloat chamber is Standard Equipment and the oil level is clearly visible. Overall, I would rate this carburetor as a well-made carburetor that is easy to handle for the price.
View detail
Fits: HONDA XL Degree 2, HONDA XLR250R(BAJA), HONDA CRM250R, HONDA CRM250R AR, HONDA XR250(BAJA), HONDA XR250 Motard, HONDA XR250-2, HONDA SL230, HONDA XR230, HONDA XL Degree
Oni Kospa!
[How is it used?
For the increased number of MOTARDWheel
How was your experience with it?
The dimensions are perfect.
How did it compare to other products?
Pre/Post discQuantity:This is a set with very good cost performance. If you are in doubt, this is a good choice!
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI GPX600 R, KAWASAKI GPX600 R, KAWASAKI GPZ600 R, KAWASAKI KEF300 Lakota, KAWASAKI KLF300 Bayou., KAWASAKI VN1500, KAWASAKI VN750, KAWASAKI ZL600 B Eliminator, KAWASAKI ZL600 Eliminator, KAWASAKI ZR750 Zephyr, KAWASAKI ZX600D, KAWASAKI ZXR400 L, KAWASAKI ZZR600, KAWASAKI ZZR600 D, KAWASAKI ZZR600 E, KAWASAKI VN1500, KAWASAKI ZX6R, KAWASAKI ZXR400
Regulator
I replaced the A-TopRegulator due to unstable voltage.
Voltage is stable and in good shape so far.
I expect it to be durable.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI Z1000
It was Exactly
It was Exactly for Z800. It was so Exact that it floated if the screws were not tightened evenly etc. during installation.
I applied Screw lock and installed it.
The size was larger than I expected, but I think the effect is larger than I expected.
View detail
Fits: HONDA CB400SF, HONDA CBR600RR, HONDA CB400, HONDA CBR600F, HONDA CBR400RR, HONDA CB1000 SF, HONDA CBR1100XX, HONDA CBR1000RR, HONDA HORNET600, HONDA CB400four, HONDA CB1300, HONDA CBR900RR, HONDA HORNET900, HONDA CB-1, HONDA CB1300 SF, HONDA CB1000, HONDA NSR250, HONDA VTR1000F, HONDA VTR1000SP-1, HONDA X-11
Refuel effortlessly without keys!
I installed it on a cbr600rr with 2bl-pc40!
The attached bolt is short, and installation is done by pushing it in, but the fit feels Exactly.
View detail
Fits: YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
No doubt!
I can pimp it with no problem at all!
The problem is not with this product, but with thisQuantity:Fog Lamp to be set!
If you are a rider who needs brightness, you may consider a Fog Lamp with a large size, but the biggest problem is the size of the Fog Lamp. (Length when installed) It is
The Fog Lamp was designed to be compact from the beginning, so there was no problem with the quantity.:I was able to set it, but still there was not enough room for clearance with the Front Fender, and it was Limit at the Full Bottom of the Front Fork. (Sweat)
I'm going to change the subject, but a similar product to this one is Ama-Xan." However, it is said that it requires modification due to problems such as the Bolt position not matching or interfering with the Body, so be careful!
Quantity of Fog Lamps in the lower part of the Headlight Compact:If you're going to set, you can't go wrong with this one from Coco's!
View detail