Reviews
Easy to install!
Installation was easy.
Japanese Vehicle Inspection Correspondence, but I think the sound is too loud.
But it's cool, so I'm satisfied.
View detail
Parenthesis looking good
I installed the Parenthesis for looks, not for performance or functionality. View detail
Fits: HONDA GROM, HONDA DAX125, HONDA Monkey125, HONDA Monkey125
What special tools are required?
While working according to the Installation Instruction Manual, a special TorqueScrew tightening tool was required, although fortunately a hand-held tool of the same type could be substituted.
I think that a regular commercially available screw would be sufficient for this 4-point screw.
View detail
It is casually MORIWAKI.
I was not happy with the snail-like cowl mirror on my CB400SB, and when I replaced it with a handle mirror, I bought a MORIWAKI one to fill the original hole. At first I ordered a cheap one from Amazon.com, but they didn't have the color I wanted, so I decided to go all out and get MORIWAKI anyway with WebikePoint.
It is a rather nondescript cover with a black matte finish, but since it is a MORIWAKIDesign (I don't know much about it and it is not Mania), I decided to go with it. As I have said many times, it is nothing special, but I think it covers the Mirror Hall in a subtle way.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
I am satisfied
Low unit price and ScrewQuantity with Driver:2pc
It is good to be able to exchange easily.
Inexpensive foreign-made products may be poorly processed.
I have a lot of defective products and I don't want them to leak.
We chose MORIWAKI products, even if they are a little more expensive.
The look would have been better if it were made of Plating.
View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
look pretty
I put it on my ZEPHYR750 because the engine is Black.
I feel like I'm MATCHing quite a bit!
View detail
MORIWAKISlip-on Silencer installed
The sound was nice and noisy. View detail
The quality is as expected.
I was a little worried because it was made to order, but the hole position was Exactly and I was able to replace it easily with Hexagonal Wrench1 pc. If you are interested in it, you can buy a Sticker. View detail
![Horn Guard [A Type]](https://img.webike-cdn.net/catalogue/images/116523/01160943_63c49dc75ce34_TS.jpg)
Fits: HONDA Rebel250, HONDA GB350, HONDA GB350S, HONDA 400X, HONDA Rebel500, HONDA CB650R, HONDA CRF1000L, HONDA NT1100, HONDA Rebel1100, HONDA CB650R
For Dress-up
Perfect for a little dress-up
It was easy and quick to install.
View detail
Fits: HONDA MBX50, HONDA MBX50F, KAWASAKI ER-6n, KAWASAKI XANTHUS, KAWASAKI ZXR750, HONDA CB400F, HONDA Shadow Sabre, HONDA Shadow Aero, HONDA Shadow, HONDA Rebel 1100, HONDA CRF1100L AFRICA TWIN, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBF600S, HONDA CBR1000RR SP2
Peace of mind that it is made by MORIWAKI
The peace of mind of being made by MORIWAKI.
I don't have Level gauge, so I guess I'll go back to OEM just in case I need to replace Oil.
So far, no problems at all.
View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB
MORIWAKIFrame Hole Plug
Purchased for CB1300, Silver is almost unnoticeable when replaced from OEM.
If you want to make it stand out, another color is recommended.
The OEM Hole Plug has a groove on the underside.
It can be easily removed by screwing a slotted screwdriveretc. into it.
View detail
It doesn't look like a Seat cover.
good point
The dedicated seat cover I have in mind is an image that is loose in some areas, but this seat cover from MORIWAKI is so tight that it looks like it has been reupholstered.
Even on a 200 km round-trip touring trip, there is not a single wrinkle.
Cushion is also so-so.
Since Motorcycle is Black, Color:I like it MATCH with Gray's Seat.
A bad point
Seat is slippery
I usually ride my motorcycle in Denim pants for motorcycles, and they are slippery, but I don't mind.
However, I'm concerned about the windproof, cold-resistant, rustling Pants for winter because they are quite slippery.
View detail
![[Exhaust System Repair Parts] Spring Long](https://img.webike-cdn.net/catalogue/images/39993/0a02-08709fh01_01_TS.jpg)
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Spring
I am repurchasing to use for Spring for Flange fixation in Chamber.
It is a single-neck swing, so it seems to pull at a good angle overflowing. Black is not bad looking, but it is not completely black. There are some areas where the color is light.
Is it easy to rust since it is steel? I would like to see how it looks for a while.
View detail
More discounts ?-?-?? after you buy!
It was just the right length for NORMALSA.
The sound was larger than I had imagined.
The installation was quite severe, but I managed to get it on, so I expect it to be durable.
Sale was further changed later and it was Shock. I would like to have it returned to Gold.
View detail
![HornGuard [B Type]](https://img.webike-cdn.net/catalogue/images/116523/01201727_63ca508c37230_TS.jpg)
Fits: HONDA CROSSCUB50, HONDA CROSSCUB110, HONDA CT125, HONDA DAX125, HONDA GROM, HONDA CB250R, KAWASAKI Z650RS, HONDA CB125R, HONDA CB125R
Installed on ADV160.
I modified the one for CROSS CUB a little and installed it on ADV160.
Simply bend the Star and widen the mounting holes to 8mm.
It is a world of complete self-satisfaction because you cannot see it unless you want to see it.
The quality is quintessential MORIWAKI!
View detail
Performance up, but
It is a Level that can be installed without going to a Motorcycle shop, although it requires careful handling and installation of the O2 Sensor and the lower part of the vehicle body.
Acceleration is a little better after installation. The maximum output is increased, but it is not as smooth as the OEM.
It would be nice to be able to lower the Rear weight for FrontHopper.
As a precaution, the exhaust noise is 3 to 4 times louder than OEM by feel. Be careful not to disturb others.
View detail
Fits: HONDA CB1100, HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
Wow that's cool
The Handlebar area is fashionable and Parenthesis is nice. View detail
Replacement is easy and quite goodSound
Installation was a simple process with Instruction Manual.
Sound is also quite good.
Design-wise, I think the Red Emblem is better than the Black one.
View detail
Pretty good Sound
[How is it used?
Was the one you received as per Image?
Was the installation difficult?
How was your experience with it?
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Moriwaki branding would be a nice touch
Nicely machined & fit for purpose. They screw in easily to the mounting points on the stock swingarm. Such a shame that moriwaki neglected to place their logo somewhere on this product, it would have been a nice touch. View detail