Reviews
Normal for a Ratchet.
For some reason I didn't have a Ratchet in this shape, so I bought one.
Those who want to turn the machine in fine steps in a deft manner may find it a little lacking.
View detail
Buy for Maintenance
The scale is colored for easy understanding.
It is used infrequently, but it is used for Large.
View detail
Soak in water and use.
It is ideal for removing scratches on the plastic parts used in many modern motorcycles! You can tear them off by hand, but it is better to use scissors to cut them because they will lose their shape! View detail
Point Utilization
This time, my Point expired, so I bought TapTool, which I had wanted for a long time.
Repairing Bolts and Nuts that have become reluctant due to daily maintenance of cars, motorcycles, and othersMaintenance.
View detail
just in case one's health fails
[How is it used?
Each part is painted with Can Spray for TZr50RRestore.
I purchased this one because it is basic Blue empty maintenance, but may have absorbed a small amount of paint.
How was your experience with it?
I think it is defensive because it is held firmly around the nose and mouth.
How did it compare to other products?
At first I worked with two layers of regular Mask, but this is more mentally secure.
But inevitably the smell is going to be penetrating.
The price is inexpensive, so if it gets dirty, it can be replaced immediately.
View detail
Not with this one, though.
Torque range is not wide enough to be configured (Low) And, Large tightening Torque setting is out of range. 。 It is useful only for low-tightening Torque, which is below the setting range for high-tightening Torque. 。 You should have it if you want to maintain it carefully. View detail
Low Torque
I had a Torque wrench over 20N, but the suspension etc.
For the low Torque indication part, I used to tighten it by hand Torque.
I purchased this for low Torque for safety reasons.
I thought about DigitalSpec. but the part that would be mechanical”Snap”.
I chose this product
The feeling is not bad and it is useful.
View detail
Graduation from Hand Torque
I wanted a Wrenchunch for low Torque and purchased it.
I used to do it by hand Torque, but now I can do it around Brake, etc.
It was good because I wanted to tighten the important parts with the designated Torque.
The more expensive ones may not have any errors, but from the hand Torque
I think the accuracy has improved a little.
View detail
Usable as usual!
[How is it used?
I bought this for maintenance of my CD50, which is becoming an old car, because the screw holes and bolts are getting a little hard to turn due to rust.
Was the one you received as per Image?
It looks cheap, but it was my first tool, so it has the minimum functionalityQuantity:Set
How was your experience with it?
The case is a slide type, which is unexpectedly difficult to use, but the product itself is not bad and is still in this condition and durable even after several years of use. The functionality is also fine, and it is still in use.
[Points to note]
Please note that this product is for Steel, so Material:Cannot be used on Stainless Steel. It will ruin the tool.
How did it compare to other products?
This Quantity:Set is 20 piecesQuantity:It is a Set and Compact, but it is fully functional. Quantity in another company's product.:I was not sure about 1 Set of 40pcs. but I am glad I went with this one.
I feel like I can make original parts by molding the screw holes, etc., and I think I am going to get into it.
View detail
Used for shopping at Touring destination!
I use it when I shop at my camping touring destination by hooking it to my touring net!
Surprisingly sturdy, even when I do heavy shopping I can hook it onto my shopping bag and hold it and my hands don't hurt!!! It's a recommendation!
WeekPoint is that it fades when exposed to UV light in no time…
Well, it won't look as good, but the feel won't change at all, so no problem!
View detail
For automotive use
[How is it used?
I ride a 2-stroke motorcycle and had a spare plug on board, but after thinking about it, I realized I had no on-board tools, so I bought this as a Wrench for the Plugfor Replacement.
I chose the MONKEY Wrench not only for plug replacement, but also for various other uses when the need arises.
Was the one you received as per Image?
The product arrived as shown in the photo, quite solid for the price.
The round and round turn of the size change is also smooth without any particular snagging.
How was your experience with it?
It is just an ordinary MONKEY Wrench.
I chose the short lever one for easy in-vehicle use, but if you want to use it where you apply force, I think the regular pattern one is better.
The rubber handles are cheap, but I felt it was surprisingly better to have them because they prevent slipping and make the hand less painful.
[Points to note]
Accuracy is pricey, so not recommended for frequent use.
I think it is good for emergencies or when there is no other size available and you have to use it.
【Review】
It is a size that can be used for Plug and would be quite inexpensive in Short lever.
I would not recommend using it for Main maintenance, but it would be good for on-board use.
View detail
To manage the Torque
I used to tighten Nut and Bolt by feel, but now that I do my own maintenance and customization to some extent, I want to properly tighten them with the specified Torque, so I bought them.
I don't know if the Torque on this product is accurate, but it is much safer to work with than my own senses.
View detail
Easy to use
[How is it used?
I bought this for my graduation from Hand Wrench.
I had a torque wrench to tighten the wheel nut etc., but I didn't have one for SmallTorque, so I chose this product which has a moderate setting range and is inexpensive.
Was the one you received as per Image?
I didn't expect much since it was inexpensive, but the texture is better than I expected and it comes in a plastic Hard case.
How was your experience with it?
Loosen the screw at the bottom and set Torque to Quantity.:Set and retighten to set the Torque without tools.
I felt that the Click feeling when it became the Torque which I set was sufficient. In a certain site, there was also a person who said that the Click feeling was too small, so there may be individual differences.
I think it's easy to use because you don't need to change batteries with Mechanical, and you can use it quickly and easily at any time.
In addition, I was a little disappointed that there was no Release of Socket. It might be unavoidable considering the price.
[Points to note]
There is nothing special about it. I think this Torque wrench is easy to use even for beginners.
How did it compare to other products?
Compared to the Large Torque wrench for Wheeletc. that I have, it is naturally lighter and easier to use.
But, as I wrote above, only the place where there is no Release of Socket was disappointing. (Because the one for Wheel has Release)
【Review】
This Torque wrench is moderately large and easy to use.
If I wanted, I could set up to 30N-m and if there was a release mechanism of Socket, it would have been a perfect score.
View detail
A multifunctional product that can be used for a long time
I've never Large Torque tightening, I bought it because I needed to turn Large fine-tuned Nut.
This size (nominal size 220mm?) is not easy to open the mouth to the largest 36mm width.
The other manufacturer's products are terribly large. (= high) We can only handle
You can also use it as a pipe wrench by flipping the jaws 180 degrees and replacing them.
The soft grip prevents your hand from getting sore when you turn it with a lot of force, unlike all Gold products.
I think that it is a product that deserves consideration enough when it is one additionally because the rattling of the chin that becomes matter of concern with the MONKEY Wrench is not especially large, and there is also a wide range of use.
View detail
Enough for the Sunday mechanic.
[How is it used?
When I bought the motorcycle, I wanted to do simple maintenance (oil and plug replacement, etc.) and I bought it.
Was the one you received as per Image?
I was worried about the inaccuracy and cheapness because of the reasonable price, but the workmanship was good and there was no particular problem in use.
How was your experience with it?
The size of the Socket is also wide, and Ratchet is also easy to use. In addition, because Case is also made of the genus Gold, there is a sense of luxury and I am satisfied.
[Points to note]
Because of the low price, there are concerns about durability and system problems, but there are no problems in performing simple maintenance.
How did it compare to other products?
I haven't used expensive high quality tools before, so it's hard to compare, but I think it's more reliable than using other very cheap tools.
Other items that would be helpful
Items to buy together
By purchasing Torx wrench together, you can divert the Socket and expand the range of maintenance.
View detail
Safe Gas Extraction
This is a convenient and safe way to remove gas from spray cans after use. With Rubber Cap, it is easy to remove the gas from the can. View detail
Powerful Magnet.
This Magnet bar is very useful for picking up Bolts and Nuts that have fallen out of your reach. The angle of the magnet at the tip can be changed conveniently. View detail
Stubby tool set43pcs
This is a Stubby tool set43pcs. In a little work, Inch is included, but Inch is not used so much, I want to increase themm a little more, well, the price is affordable and for a little work, I do not have to take out the tool box, it is enough to use. View detail
I keep it for emergency use.
Because there were many tools that seemed to be used well in the assortment of contents in the Tools Set of compact size, I prepared it. Because it can be used as a replacement for an in-vehicle tool, one tool may be useful in several ways. View detail
The bent tip is not suitable for tight spaces.
I bought it to remove a Hose Clamp in a secluded area, but because of the curved tip, I couldn't see the tip and the target because the PliersBody blocked my view in a tight spot, so I was able to pinch it in response, but it was a bit disappointing.
Well, it's normal to have several types of tools like this, so you can just buy a straight one too …
In addition, I think the quality of the appearance is very good for the gold amount.
View detail