Reviews
Fits: HUSQVARNA FE 450, HUSQVARNA FE 501, HUSQVARNA FE 350, HUSQVARNA FE 250, HUSQVARNA FE 300, HUSQVARNA FE 150, HUSQVARNA FE 125, HUSQVARNA TE 450, HUSQVARNA TE 501, HUSQVARNA TE 350, HUSQVARNA TE 300, HUSQVARNA TE 250, HUSQVARNA TE 125, HUSQVARNA TE 150
Necessities when Lowdown Link is installed
I installed it on a HUSQVARNA TE250 2017, which I always use for forest road Touring.
The reason why we installed the ZETA Lowdown Link was to improve the suspension, but when the Link is installed, the suspension tends to become softer. Therefore, we installed the Spring, which is one step stiffer than the OEM Spring, in order to balance the suspension.
As expected, the low-down link was built in, but the suspension had a firm backbone, making the rear suspension very easy to ride.
The Lowdown Link is easy to install and convenient, but it is noticeably softer. We highly recommend hard springs for a good finish!
View detail
Well than what you see in the picture.
To adjust the FrontPre-road,
I bought it because I didn't want to put Anodized on Wound.
Much more rugged than it looks in the picture,
It's a bit … to carry.
View detail
Fits: HONDA CRF250L-S, HONDA CRF250L
Purchase of Crf250rallyMotard
To be Motardized!
After you purchase Wheel, you can visit ??
Found it for sale from Technics and installed it.
Caliper stays OEM and wears Support for +m!
(car) being safely installed
I also show the SUPPORT for the purchase! Easy to buy ….
There are various rotors, but I was wondering whether they are compatible or not,
It was easy to purchase and ◎.
View detail
Necessities for Inverted Front Fork
The function and texture are sufficient. I am disappointed that it cannot stand on its own. The other thing is the price. If it were a little more affordable, I would have no complaints. View detail
TGRPerformanceShock
It seems that the OEM XG250 TRICKER is not good, and of course there is a change by replacing it. In my opinion, the Seat is softer than the OEM, even though it is a longer match. The tire is GP210. I think that people who care about the ride quality in detail will be able to see the large change. I think that people who don't care so much about the ride quality will not see any change;
At any rate, I am satisfied with the change. The reason I am not satisfied with the rating is because this is the only one I have tried.
View detail
TGRNippleTorque wrench
It fits Nipple and is very easy to use. View detail
TGRHard spring
The front squishy ride of the XG250 TRICKER was replaced by a firmer ride, the brake sinking was reduced, and the bike ran smoothly even though it was firmer. I am satisfied with Large, but since I only use TGR, my evaluation is modest. View detail
The unreliable Front suspension is now solid.
Changed Spring along with Front forkOH.
With the OEM, the nose drive was very bad and I had a lot of hiccups when braking quickly.
I was able to run the OffRoad course with less bottoming out and less straining.
However, it will be difficult to take action using the repulsion of the fork, so if you want to use it like a trial, you will need to adjust the viscosity of the fork oil and the oil level.
Oh yeah, I forgot to mention what I like most about it.
Technics Sticker is the best!
View detail
It's okay, I guess.
I replaced the spring as well as the oil in the front fork. Since it was only one side, the work itself might be easy, but I asked the DREAM store to do it for me. I'm not dissatisfied with NORMAL, but I personally think that the front movement has improved. I'm not dissatisfied with NORMAL, but I personally think the front movement is better, but I think it's a little lower on the rear. View detail
The motorcycle dealer wanted it. I had no choice but to lend it to him.
This would be a super time saver!
I'm sure it's useless to Sun Machine, who feels his time is free.
If this Compressor has Impact, you'll be done in no time!
If you use it for O/H along with the red stick, you can maintain the Rose once a year.
Thanks for the special work? (^o^) /
View detail
Useful Items
Red and Cool (Lol)
I've been using a burr wire for a while now, and it's just so much more convenient to put it back in. (Lol)
Screw diameter is also 4Pattern, but it should not be used!
Do you use OHLINS or something?
What I'm trying to say is...
It means it's useful.
View detail
I think I can make it. I think I can substitute something.
BALI is BALIBALI, but I don't care about tools because ingenuity is a large thing.
All you have to do is file a
Other people wrote that Size doesn't fit, but I don't care because I just need to cut it down.
I'm sure someone will be selling imitations with 3DPrinter at some auction or Nanikari.
I think it's a good product.
View detail
I bought it because the OEMOption did not have the Rate setting I wanted.
I use it with Enduro and G650 XCOUNTRY.
The softest fork spring for KX250 and X is 4.6N.
I thought I'd start with OEM and put in 4.6N.
The Motocross has a lot of banking and is comfortable to ride, but the Enduro and the G650 XCOUNTRY with their reverse banking and flat corners are still too stiff for my skills and I can't get a good feel for the front.
I bought this product because there is no 4.4N in OEMOption.
I felt that the finish was cleaner and more Cost effective than OEMSpring.
I felt the stiffness of the previous spring rate because of the stickiness in breaking, so I hope the new spring rate will sink moderately and turn from the first turn...
I had to wait a long time for the stock to be confirmed and shipped, but when I contacted them, they were able to ship it right away, which was a LARGE help.
View detail
I like the idea of a dedicated tool.
It is a hard Plastic Wrench
The color is also very nice, like a special tool.
In fact, even if you don't have it, there are alternatives, but a special tool is still a great motivator!
The atmosphere will be such that you can easily do O/H.
I want to Overhaul once a year from now on!
View detail
You can enjoy the advantages of special tools.
I was looking for a plastic tool because my opponent is Aluminum
It's a little heavier than I imagined.
I'm happy to use plastic without giving the other side Damage!
View detail
SHOWAFork Maintenance
I thought about making a simple tool, but I bought it as a dedicated tool considering the regular replacement of the oil seal.
When used in conjunction with the Electric Impact, I was able to disassemble the Showafork in no time. I'm glad I bought it because the cost is well worth it and it's easy to work with.
I used it by holding it between my legs because it didn't stand stable, but later I saw that the plate to hold it in a vise is welded, so I think I will fix the Tool in a proper place when I use it next time.
View detail
Technics is the way to go.
[How is it used?
Used in Off-roadMain of forest road, Trekking, EDCourseetc.
Was the one you received as per Image?
I wasn't worried originally because it's a Technics product, but there's nothing to complain about, including the texture.
The Click feeling of DumpingAdjust is also very easy to adjust, it turns lightly but the Click feeling is very clear.
Was the installation difficult?
It's a vehicular problem, but it's a little difficult to do because you have to work in a very limited space.
It is easy to interfere with the body when inserting the shock and passing the bolt on the top, so it is easier to work with the body as loose as possible around the link.
How was your experience with it?
First of all, the ride height was lowered at 1G (manufacturer's recommended setting) and it feels softer than normal when you push it by hand.
In reality, the Spring rate is almost as high as OEM, and the Dumping is stronger, so it should be harder, but I think it feels that way because of the good movement.
I actually took it to a nearby riverbed and let it run for a bit, but the Gap's absorbency is much better.
With Normal shock, the Rear will bounce and flop after going through Large fine-grained Gaps and bumps.
This one absorbs Shock very smoothly, but with no extra change, and you can go into it with Axel constant.
By the way, when I asked the manufacturer about the lowering of the rear on the 1G ride, he said that he aimed to reduce the cutting caused by the lack of TRAIL amount.
As for the Rear on this vehicle, there are no negatives, even if there is around 80mm of sink at 1G of ride.
On the other hand, the front tends to cut too much, so it is good to set it in the direction to push this.
[Included Parts:were they on?
The initial recommended SettingData, Hook wrench and two Stickers were included.
[Was there anything that disappointed you?
So far, nothing.
Other items that would be helpful
I've used your service many times in the past for suspension repair of other vehicles and order production of Nitron.
Each time, I think that the after sales service is very kind and polite.
Again, when I called to ask a small question, I received a well-reasoned answer immediately.
It's not a product that you can just buy, install and be done with it, it's a Quantity that you can tailor to your needs.:It's only when you set it that it shows its true effect.
I think it is more than worth the price to get accurate setting advice (not only for their products but also for the balance of the entire vehicle).
View detail
Spring
The rear has been replaced with their Shock at the same time
When Breaking, Front sinks at once, and Rear becomes floating, so you need to make it a little bit harder I bought it because it was too expensive
The surface seems to be slippery than NORMAL There seems to be no up and down. the amount of oil is the same as NORMAL and the recommended setting for STREET So, only Spring was replaced
It was better when Breaking, but I wonder if it was harder to put him to sleep because of the change in his posture?
Well, I'm going to try sticking out Fork and playing with it by imitating the setting
View detail
Almost satisfied
I used it to invert the KYB
If you don't want to make the anodized part of a normal Gold genus Wrench into a mess, this is the one! re
While there are some cosmetic questions, the satisfaction with the work done is passable
View detail
I'm generally pleased with the results
After about two years of use, every time I stroked it, it started making a creaking noise 。 It's a bit loud
I don't have 10,000 miles on the road almost all the time
View detail