REIT Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

REIT Clear all

REIT

14 Dec 2023

MCP SC12 Seat Cap

Fits: HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125

Japanese Webike user

4/5

KF47.JK05 conformity check

I use a PCX to commute to work, and since the parking lot is not paved and the dust from the neighboring workshop was flying around, it was a hassle to buy a Body Cover. When I asked webike about the compatibility, they told me that they had not yet checked the new model, but I bought it anyway because I thought it would not be so different from the old model. When I installed it, the length direction was fine, but the horizontal dimension of the front half could not be folded inward due to the limit. The edge of the Seat peeks out a little if you don't hold it gently,
I am writing to add that I have used it for exactly one year. I hung it up, took it off, and folded it again five days a week, and after exactly one year or so, it started tearing from the seam of the pocket for storage. I hope it has been fixed. View detail

OSS Taffeta Motorcycle Cover (Boxed) [LL]

REIT

31 Oct 2023

OSS Taffeta Motorcycle Cover (Boxed) [LL]

Fits: KAWASAKI Ninja 250 R, KAWASAKI ZRX400, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, SUZUKI RGV-r250, SUZUKI ST250, YAMAHA TRZ250, YAMAHA XJR400 R, YAMAHA ZEAL, SUZUKI GSX400, SUZUKI GRASS TRACKER, YAMAHA BWS 125, YAMAHA R1-Z, SUZUKI VanVan 200, KAWASAKI Estrella, KAWASAKI BALIUS, HONDA JADE, HONDA HORNET, KAWASAKI 250 TR, HONDA FTR

Japanese Webike user

4/5

It is quite good.

Purchased for AxisZ
I was worried about L Size, but I am glad I went with LL because it is easy to hang. View detail

MCP High-spec Motorcycle Cover 《Bike Guard》 [M].

REIT

14 Mar 2023

MCP High-spec Motorcycle Cover 《Bike Guard》 [M].

Fits: HONDA SUPER CUBC125, HONDA CROSS CUB50, HONDA MONKEY125, HONDA ShMODE, HONDA glom, HONDA APE 100, HONDA APE 50, HONDA NSR80, HONDA NSR50, HONDA DIO110, HONDA ZOOMER, HONDA BENLY50Pro, HONDA BENLY50110, HONDA BENLY50, HONDA SUPER CUB110, HONDA SUPER CUB 50, YAMAHA TZR50, YAMAHA RZ50, YAMAHA YB-1, YAMAHA TOWN MATE

Japanese Webike user

4/5

Solid Motorcycle Cover

I bought this because I had to leave my Motorcycle outdoors. The fabric is more solid than I expected and has a good texture. So far the water repellency is good, and I think that if I use WaterproofSpray regularly, the water repellency will be maintained. It is easy to hang on Motorcycle because it is easy to tell the front and back direction with Yellow color and Black color at the front and back. I gave it 4 stars because of its durability. View detail

REIT

15 Jan 2023

MCP High Spec Bike Cover "Bike Guard"

Fits: SUZUKI GSX-R250, LAMBRETTA LAMBRETTA 200, LAMBRETTA LAMBRETTA 50, LAMBRETTA LAMBRETTA 125, HONDA CB250R, HONDA CB125R, APRILIA RS125, YAMAHA RZ350, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, YAMAHA SR500, YAMAHA CYGNUSSR, YAMAHA MAJESTY S, YAMAHA MAJESTY 125, YAMAHA NMAX, SUZUKI Gixxer 150., SUZUKI GSX125R, YAMAHA MT-03, HONDA PCX125

Japanese Webike user

4/5

Maintains functionality after approximately 1 year and 10 months

There are so many types of Motorcycle Covers that it is hard to know which one to buy.
I don't think price is proportional to durability, and there's no way to find out in the first place…
So I used to buy relatively inexpensive ones and replace them each time they tore.

This time, Doppelganger StretchMotorcycle Cover2/I bought the DCC533-GY as an inside Cover and wanted something that would last as long as possible to keep the inside dry, so I bought this Motorcycle Cover.

[How is it used?
It is stored completely outdoors and Blue Sky without a carport and is exposed to wind and rain 365 days a year.
It is a harsh environment for Cover because there is no obstruction around it and it is exposed to direct sunlight.

Was the one you received as per Image?
Yes, it was approximately as per Image.

○○The lack of a long vertical seam at the top of the head (back) is wonderful…3
I think the fabric is good to begin with.
When you hang the Cover, you can check the front and back by the color of the carrying handle, which is surprisingly convenient.
When the draw cord is pulled to tighten the foot, the lower part of the front and rear Wheels come out (it is sad that the Wheels get dirty from the wind and rain) …2
I was worried about rainwater getting in because the air ventilation is large, but there was no problem.
After removing the ○Cover, I crumple it up and put it in a bag, but it doesn't have any weird habits or tear in the fabric!

For YZF-R125, the height is perfect, but not tall enough.
I wonder if the high Seat has something to do with it?

How was your experience with it?
I have been using it for about 1 year and 10 months, and my impressions are as follows.

No seams have been cut.
○Waterproof property of the fabric is maintained.
○○Buckle & Belt is discolored but not cracked…5
I have also used the lock holes in the front and back and the seams have not frayed.
The front side of the carrying handle has faded from yellow to orange.

[Points to note]
Avoiding the edge of the Cover from the Side Stand allows the Draw cord to be pulled more (to take up slack in the Cover).
Tightening the draw cord and buckle&belt is important (if the cover is inflated by strong winds, dust particles can enter the cover and cause the cover to tear).

This is not the only attention point for this Cover. (LOL)

How did it compare to other products?
So far, I've used E Type by Y'S GEAR, Black Cover by DAYTONA, or a cheap cover sold at Home center, but so far, they are the same etc. or better.

Y'S GEAR and DAYTONA Cover… After about 2 years, the waterproof property has decreased and the long seam on the top of the head has torn!
Home center cheap Cover… Fabric ripped and RoseRose in less than 2 years.

So, based on my experience, I am quite excited about this Cover, which does not have a long seam on the top of the head.

I want it to last at least 2 years (2 more months!). If I have it for 4 years, I will become a Repeater. View detail

REIT

24 Oct 2022

MCP High Spec Bike Cover "Bike Guard"

Japanese Webike user

4/5

It will last for a long time

I bought it at Motorcycle store.
GoldIt was expensive in terms of value, but I trusted it because I was told it was durable.

There are holes (color-coded yellow and black) in the front and rear for inserting chain locks, etc., and the top of the cover has a loop for lifting (?). The top of the cover has a loop for lifting (?).
A Belt is threaded through the bottom of the vehicle to prevent wind roll-up, and a Buckle is provided to lock the Belt in place. (Belt is of course included).
I think the structure could have been designed to squeeze the undercarriage.
Since it is not a fireproof material, there is a risk of melting if it hits the exhaust pipe right after the engine is turned off. (The Motorcycle shop explained that there are two options, the longer lasting one or the less flammable one.)

I think it worked for about 4 years without any problems.
Then, after about the sixth year, the color of the aforementioned yellow-colored section faded away, and then the upper lifting loop broke off due to age-related deterioration.
When it was about to go 10 years or not, the area where it hits the Rear Sets started tearing, so we decided it had reached the end of its useful life.
The price was high, but if it has lasted this long, we consider the cost to be well worth it. View detail

REIT

25 Sep 2022

Lotus Rain Block Waterproof Cover

Fits: SUZUKI STREET MAGIC, SUZUKI BIRDIE 50, SUZUKI BIRDIE 80, SYM CITY COM 125, SYM FIGHTER 150, SYM Zi125, YAMAHA RZ50, YAMAHA TZR50, YAMAHA YB-1, YAMAHA Axis As Lead, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, YAMAHA MATE NEWS, YAMAHA TOWN MATE, HONDA APE 100, HONDA XR50, HONDA APE 50, HONDA SUPER CUB 110, HONDA SUPER CUB, HONDA ZOOMER

Japanese Webike user

4/5

Wound-resistant material for lining

I was looking for a body cover made of a material that does not easily get wounds on the body of the car, and I was satisfied with the Large cover.
I'm a little disappointed that when I chose the size, it was a M size when I looked for LEAD125, but when I put the actual product on, the height of the Rear was a little short and I was not able to get a good fit.
The rear wheel is slightly visible.
On the surface of the box, there is a table of Motorcycle type, Body cover size, and Seat height, etc. Based on the table, I found that it is L size.
It would have been nice to see this Size table when ordering. View detail

REIT

27 Jan 2021

MCP High Spec Bike Cover "Bike Guard"

Fits: YAMAHA X-MAX, KAWASAKI W800 Street, KAWASAKI KDX 250, KAWASAKI KDX 220, BMW F650GS, BMW F700GS, BMW F800R, KTM 125DUKE, KTM 200DUKE, KTM 390DUKE, KTM 690DUKE, APRILIA SX125, APRILIA RX125, HUSQVARNA SVARTPILEN401, HUSQVARNA SVARTPILEN701, KAWASAKI Versys 250, KAWASAKI KLX 110L, KAWASAKI KLX 125, KAWASAKI KLX 250, KAWASAKI KLX SR

Japanese Webike user

4/5

It's well made

This is a cosy Cover. Although the fabric is also firm.
I think it would be tough to park without a roof.
It is for parking with a roof, without an exterior wall, etc. Since it is a Cover, it is necessary to prevent moisture. View detail

REIT

05 Dec 2020

MCP High Spec Bike Cover "Bike Guard"

Fits: YAMAHA VINO system, YAMAHA JOG system, YAMAHA APRIO system, SUZUKI LETS system, SUZUKI SEPIA system, SUZUKI SEPIA ZZ series, SUZUKI GS50, HONDA DIO system, HONDA dunk, HONDA TACT system, HONDA Giorno, HONDA Today, HONDA Today

Japanese Webike user

4/5

It's a little too good for the DAX...

[How is it used?
This is for outdoor and covered bicycle parking.
Was the one you received as per Image?
Unlike cheaper motorcycle covers, the fabric is thick enough to give you a premium feel for the price.
How was your experience with it?
It is flexible and easy to cover.
I have a pre-basket on my DAX, but there is some room around the handlebar.
Fit.
The height around the rear is a little short for DAX.
In terms of overall size. "S" is Exactly, but it's not a good idea to use the "M" seemed to fit.
[Points to note]
Although there is a little bit of floating around the Rear, it is used by squeezing firmly with the draw cord.
It seems to help you deal with things like blisters by
How did it compare to other products?
I've been using a variety of things, such as Cover, which I bought from DAYTONA and 0mazon, but
I think the thickness and flexibility of the fabric is the best.
Front and rear handles? I like how easy it is to get the cover by pulling the

Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
For GPZ900R I liked the REIT cover I bought for my GPZ900R, so I bought the same manufacturer's one for the DAX.
If possible, it would be great if you could sell not only silver, but also black and other colors. View detail

REIT

06 Oct 2019

MCP High Spec Bike Cover "Bike Guard"

Japan User(translated)

4/5

It is a solid product

I am happy with the solid construction
Since there is no Garage, durability is important
The durability of the fabric is important because it is exposed to rain, wind and sunshine
This product is satisfying with its thick fabric View detail

REIT

06 Oct 2019

MCP High Spec Bike Cover "Bike Guard"

Japan User(translated)

4/5

It is a solid product

It's a solidly built product at a reasonable price
The fabric is thicker and seems to be more durable
Motorcycle seats are exposed to rain, wind and sunshine, so don't go cheap or bad It is
I'm very satisfied with this product View detail