Reviews
It also seems to be quite strong.
I chose this footpeg for a TandemSpec. because I bore up my CUB PRESS from 50cc to 75cc and it is now a Yellow color number. Installation is easy as the footpeg is co-tightened to the screw under the rear suspension. View detail
It is a cheap plating, but it is usable.
[How is it used?
Normal headlight has a Speedometer, so we decided to purchase it in order to change it to a separate one.
Was the one you received as per Image?
I can't complain because the price is low, but I feel the plating is cheap.
Was the installation difficult?
The installation itself is Bolt On, but the wiring is complicated. However, if you carefully reconnect the wiring, anyone can do it.
How was your experience with it?
It has been used for a long time with no particular problems.
Plating is thin or Rust appears, but it is unavoidable.
[Included Parts:were they on?
HeadlightWiringetc. is included.
[Was there anything that disappointed you?
Not particularly
I like the design of the ▼Headlight lens because it is Retro-chic and not a Reflector type.
View detail
Good response
The product arrived exactly as I had imagined. The only problem was that there was a slight defect, but I was thankful for the quick response after that. I would like to thank you again for your prompt response. View detail
Solo tuck and roll design for that custom look
About quality and texture, I can confirm that the quality is good and that the material used is black synthetic leather with a black stitching to create that tuck and roll design for that custom look. About the feeling of use, This seat just looks beautiful fitted on the bike and the profile creates a lovely positioning that has you sitting down into the seat. Products to buy together, Since this seat is a lowdown design then it would be ideal to add a lower set of handle bars to your cart to be able to position your upper body lower to match the seat for the most comfortable riding position. Difficulty of installation, I can say the fitment of the seat for my installation was very easy due to the simple nature of the manufacturers mounting of the original seat which translates to how this seat also mounts. Cost performance and comparison with other products, Pricing of this product is great. You receive a beautifully designed seat made from good materials. Cheaper then the same designed seat from Kitaco. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Classical Headlight with a slightly large size
[How is it used?
I chose this product, which is slightly larger than the Small Type, to store the wiring in the headlight of my XL250S.
Was the one you received as per Image?
For the Motorcycle Image, the Lens might be cooler if it were more classical, but I wanted a large size Case with wiring processing, so I am satisfied.
Was the installation difficult?
Wiring in the original Headlight was messed up and out of control, so I left it to the store. It is better to leave the electrical system to a store you can trust.
How was your experience with it?
The shape of the headlight also does not look out of place with the car body.
[Included Parts:were they on?
No problem
[Was there anything that disappointed you?
Yellow Bulb is more to your taste. It is a bit Classical and has some good qualities, but the White bulb may be more modern. I will consider changing the Valve in the future.
[Others]
For the price, it was a good purchase, well made and solid.
View detail
For old car style Custom, you need two!
[How is it used?
I purchased Reflector to make an old car style Custom.
Was the one you received as per Image?
It is somewhat cheap, but not a problem at all.
Was the installation difficult?
Since the bracket is an external bracket, we were able to install it by using a washer and bolting on the bracket.
How was your experience with it?
I initially installed them for appearance customization, but now I can drive with peace of mind due to the increased nighttime visibility.
[Included Parts:were they on?
There is nothing else.
Washer and mounting Nut must be poised.
[Was there anything that disappointed you?
The reverse side is steel, so it is likely to have Rust, but since it is the reverse side, it is not so much of a concern since it is hidden.
Cost-effective parts for old car customization, including ▼Yon Four.
The Image looks a lot more like an old car than I expected.
View detail
Overpriced.
I use it for z1. Parenthesis is good and it is easy to see. View detail
Looks good and is cheap
Ok, I cant review how long this will last but its a good replacement size wise for the OEM rubbers that you cant get on bikes like the RD and RZs in both 250 and 350 form. View detail
FCR Carburetor BodyFloat packing
I bought it because I wondered if it was oil resistant.
The item itself did not lose its shape and fit as usual, so for this gold price, I think it is excellent in terms of cost performance.
We'll see how durable it is.
View detail
FCR Carburetor Body Float packing
I was looking for packing for the Float chamber of the FCR Carburetor Body and found this item. The first thing that caught my eye was the gold price and the words "Durability UP". I found it to be a normal packing, and it fits in a normal way. The only thing left is the question of durability. View detail
Solid for the price.
The KSR80 from Tank to Carburetor is exactly this delicate size. To be honest, it is so long that it does not need to be this long.
The included Clip is almost useless as it does not spread out.
View detail
I used it to convert my KLX250ES to BlinkerLED.
I bought the OEM Blinker relay for my KLX250ES because it was 3 pole and it was cosmetically sound.
This Relay is a Material that comes with the OEMRelay.:Rubber Bracket and there is no part to fix it.
It is Large fineness compared with OEM.
I had a 110 Coupler 3-pole and a H4 Coupler left over, so I used Vinyl Tape, Heat Shrink Tube, etc.
Waterproofed Cable is made, connected and secured with Tie Wrap.
The front blinker of KLX250ES is 110 type 2-pole coupler and the rear blinker is Bullet Type Terminal connection.
The Indicator bulb in the Meter's Blinker must also be replaced with an LED or it will become a High flasher.
I am left with a bulb pulled out. ^ ^;
As others have mentioned, it only flashes once when Blinker is turned off.
View detail
Hidden components of self-sufficiency
I was worried about the tattered Bump rubber, so I put on this product which fits the diameter of the shaft, and since it was troublesome to remove the Spring, I cut into the Bump rubber and installed it through the gap in the Spring. The inner diameter of the spring is a little narrow, so there is a gap in the cutout area, but it's not a problem if you can't see it! The suspension never bottoms out so it doesn't have any effect, but it looks like an OEM product and I'm happy with it. View detail
CHERRY Cherry Φ70Short Tube Hand BentType
It's well made for the price. ！！！！ View detail
Fits: YAMAHA SR400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA DRAGSTAR1100
For first aid, it is Recommendation.
It was used in the Under-seat engine hall.
I think it's cheap and good, but again, durability is nowhere near as good as it should be.
I think it's enough if you use it overhauled for a long period of time, for example, if you suddenly have a gasoline leak and have to do emergency treatment.
A good product if you use it differently.
good point
The Gold amount per unit is low, so you can always have it for stock.
If you want to use it as a first aid, it is highly recommended.
It's also oil-resistant, so it passes the test.
It can also be used for XJR and other vehicles.
A bad point
The durability is still low. I don't think it will last half a year.
The Size does not match delicately, so it bites with Body.
Recently, I've come to think that it's not that cheap parts are bad, but that you should use them differently.
There is also Merit that it is suitable for always having in the Trouble which is attacked suddenly in the travel place, and this product is always stocked in Back and goes out.
If you're looking for a serious Overhaul, I think OEM is the best way to go.
View detail
Float packing
Float packing for FCR Carburetor Body33, but I think it is cheap and good. I will buy it again next time. View detail
Surface treatment is not complaint
After repeated standing jostling with the XELVIS, I discovered a crack at the base of the Clutch lever.
I was surprised to see it like that for the first time, but of course the OEM is out of print, so I bought this one from Universal.
Installation was fine. "Surface is not Beauty. The terminal shape of the Clutch switch is also the same as OEM.
However, I am concerned about the rattling of the Lever mounting part.
View detail
It's overpriced on the outside.
This time I removed the OEM blinker which is too big for Sr400 and I confirmed that Waterproof anti-vibration measures are strictly taken. In addition, the attached light bulb is only an additional thing, the light bulb of OEM was transferred because it became a high flasher, the measure against waterproof is only a form. The price is the price, so I don't say the luxury. We don't recommend it for large motorcycles such as Tada and sr. View detail
Cospa is good (・ω・) b
I needed the Filter in a hurry.
I was hesitant to buy from a famous manufacturer because of the high prices.
I found this product and made an instant decision!
It looks and feels as good as the famous Manufacturer's products.
I'm happy with the performance.
The rest of the story is still to be seen as it was just purchased.
Repeat plans if it's durable. (Translated; ω ´) no
View detail
Fits: Others
ZEPHYR750 OEM carburetor's Recommendation
When using the ZEPHYR750 OEM carburetor for power filtering, the I've seen many times that the power filters are installed with the power filters of #1 and #4 in a bad position It is You won't have to worry about that with this one!
There's enough space between the Frame and your finger to spare
I wish we had Black instead of Plating
View detail