Reviews
Improved Clutch operation
The OEM clutch lever was replaced because it had become large due to age-related deterioration. The new clutch lever has a more moderate feel. View detail
Fits: SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S
KATANARestore
I bought it used and the OEM Parts were badly rusted, so I replaced them with new ones to prevent rust. It looks good. View detail
Fits: SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S
KATANARefresh
Replaced by KATANARestore, no problem with OEM parts shape. View detail
Fits: SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana
Ono SpeedANDF Canceller
It was installed at the same time as the front fork overhaul. The appearance is very neat and clean. View detail
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
Stainless Steel Chain Pull
Installed in conjunction with KATANA's suspension Refresh. It looks onliy, but I am satisfied with it. View detail
Fits: SUZUKI GS1000, SUZUKI GSX1100S, SUZUKI GSX750 S1, SUZUKI GSX750 S2, SUZUKI GS1000, SUZUKI GSX1100S, SUZUKI GSX750 S1, SUZUKI GSX750 S2
No problem for a short ride.
If the engine is running, it's ok. View detail
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
CellMotor Exchange and Quantity:Set
CellMotor Exchange and Quantity:Replaced by Set. The cord is a little long, but no problem. View detail
Racing Stand Hook
Reason for purchase
Since GOOSE does not have a center stand, I bought a very inexpensive racing stand and worked without a hook, using the rear swing arm to support the stand. It is not impossible, but it is easy to gap and may damage the Swing Arm.
For work efficiency, we decided that it would be better to add a Stand Hook and purchased it.
Although there are a variety of Material:I chose Plastic because I thought I would not have to worry about scuff marks. I also thought the price was reasonable.
【attachment】
The original Screw hole Cap was removed and the Screw hole was grimly and thoroughly cleaned to make sure the supplied Bolt would fit Smoothly before installation.
【Impressions】
I have not used other Stand Hooks of this type, so I can't compare, but I think it is something like this. I think it is not bad.
View detail
Fits: SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S
OEM Parts Like
Quantity of Grommet and PlusScrew clamping Screen:Set....a helpful price in the face of rising prices for OEM parts?
I think it is a common occurrence in KATANA that cracks are caused by over-tightening the screen, but I think cracks are caused by being caught in a hard base simply because the screen is tightened with only a rubber washer or plastic washer.
As you can see, the grommet is built more like a damper than a washer.
Since KATANA's screen is in essence a floating mount, I wonder if it will be replaced by timing, such as when the screen is felt to be jumpy while driving at high speeds.
I think it is probably made of EPDM or something similar with excellent weather resistance.
View detail
For Brembo caliper
It's a simple creation, but well thought out.
The dragging seems to have dissipated a bit.
It is also easier to install Caliper, which is good because Dust is hard to accumulate in the structure.
I think the price is a little high, but I think it's worth it.
View detail
BrakeTouch has changed.
Effect of original use
Facilitate Pad replacement with Race, etc.
Purchased with the expectation of a different effect than
(Expectations)
Improvement of drag
BrakeTouch improvements
I've driven about 300 km since I installed it.
It's hard to describe in words.
The change was definitely felt.
If I had to describe it, I would say the ease of initial Touch Control.
Stress is reduced.
It has been a pleasure to Braque.
I didn't notice any difference in the drag.
View detail
perfectly (suited)
It was perfect without cutting into front cowl. View detail
Fits: SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750SS
As Repair Parts Stock
I like the fact that the material is Stainless Steel, but I would have liked to have purchased it with Black paint like the OEM. View detail
Fits: SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S
ScreenGrommet is a consumable product.
I bought it because my ScreenGrommet was getting worn out, and it's good to replace it before the Screen gets a Crack! View detail
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
Cell MotorHarness
Harness replacement for old cars is basic. Installation is not so difficult. View detail
Mt. Screw fits the bill!
It is a dedicated product, so there was no excess Screw Mount and it fit perfectly. View detail
Fits: SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX750 KATANA, SUZUKI GSX1000S KATANA (KATANA)
SUNSTAR 310mm, used on Brembo caliper
It's a very accurate product, with no major adjustments and a Center. The fact that it doesn't look flashy is a good thing. View detail
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
Looks good
If you replace the OEM dirty one, it looks good and feels good to have a beautiful one.
As mentioned in the impressions, there is some stainless steel burn, but it can be removed by polishing, so there is no problem.
View detail
Fits: SUZUKI GSX750, SUZUKI GSX750, SUZUKI GSX1000S, SUZUKI GSX1100, SUZUKI GSX1100, SUZUKI GSX1100
With the meaning of Refresh
The KATANA is an old car, and I felt that the coating was discolored and hardened, so I replaced it. I don't feel any particular effect, but I can drive it with peace of mind in the future.
The replacement itself is easy, but if you are modifying the handling and electrical components, you will have to go through a trial and error process to install it, which is also fun.
View detail
Fits: SUZUKI GSX750, SUZUKI GSX750 , SUZUKI GSX750 , SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX1100S
It is the same as OEM Product
It is no different from OEM Product.
The price seems too expensive.
I am satisfied with the quality of the product.
In the operation, I was more careful to make sure that the needle went to the zero position when I put it on than when I took it off.
The finished product is nothing short of amazing.
The OEM needles were looking much cheesier due to deterioration, but I'm very happy with how they turned out.
View detail