Reviews
This is the only way to do it.
I bought this exclusively for removing the carburetorIndicator from my 4 shot Engine.
There is a hole in the Aluminum Frame for the Driver, and with a fairly long Shank Driver, you can loosen the screw in the Insulator band.
In reality, the 450mm Shank is a little too long, but it gave us plenty of room to work with.
The grip is long enough to fit the overall length of the machine, so you can turn it with both hands without worrying about turning it with a lot of force.
The tip of the tool is a little bit special shape, which is long in one direction of Plus groove, but it can turn a normal Plus screw without anxiety. As the name suggests, Shank is a square shaft, so you can put the tool on it and turn it if you want to.
View detail
"Normal The sense of security of
It's a very ordinary Driver.
However, unlike very cheap products, there is a sense of security that can be taken for granted without any modification.
Shank and Grip are solid, Plating is clean, and durable. I've been using it quite roughly, but there are no cracks or chips in the grip or the tool tip. The tip is worn out.
If you are not a fan of the thicker grip end for fast turning, this one may be easier to turn.
It's not like a hundred-yen tool or a BALI, but the tool tip has a little edge, so if you use it roughly, it might scratch the object.
View detail
One and only
The world's standard slotted screwdriver.
Ordinary slotted screwdrivers have a tapered tip for ease of insertion, but PB's patented parallel surface finish on the tip of the tool allows it to fit perfectly with Minus screws for machines, many of which have parallel grooves.
Grip is like a rough rubber. I think it is not slippery, but there is not a sense of luxury at all.
It was just unpopular with the old Plug lip. "Ewoks." You don't have to worry about your toolbox getting smelly.
View detail
In OHLINSFork's Setting
[How is it used?
I bought this for the OEM Front fork damping adjustment from RSV4 FACTORY.
How was your experience with it?
I used to use the Wrench from Hexagonal Wrench Set, but it was difficult to use.
At that time, I saw other people's impressions and thought it looked easy to use, so I bought it.
Since it is a Driver type, it can be turned lightly.
[Points to note]
Since it is a ball type, you can approach from many angles, but if you apply too much torque, the ball will come off.
Also, I wanted this size for suspension setting, but I bought other size by mistake before, so please look at the size carefully when you buy!
View detail
For Maintenance
When I was using PlasticType, it was broken, so is there anything good? I was looking for something better, and I found this one and bought it.
You can switch between Straight and T-Shaped, which is nice and easy to use.
In my imagination, I was imagining a little more Small and thin, but it was a little Large. I was thinking of using it with the on-board tools, but it seems to be a bit in the way.
I thought that the grip was not good when tightening unless it was this size.
View detail
It also loosens the hard screw.
It is the best for loosening the screw which is rusted and hardened, and since it is a Penetrating Driver, it can be tapped with Hammer and bite firmly even if it is licked and the tip does not slip, so you can apply Torque firmly. View detail
You can find the power source safely.
This Inspection Tester is indispensable for the installation of electrical components. It is useful to find the permanent power supply or attachment power supply from the harness of the vehicle. If there is a power supply, the LED on the body will light up, so you can find it easily. View detail
Effective in tight spaces
Effective for use under the body of a motorcycle or in tight spaces where there is no clearance. It is easy to turn with just your fingertips, and if you have a firm grip, you can turn it with a strong torque. View detail
Saves you the trouble of disassembly
It is useful for loosening and tightening the Plus screw in remote places. If it is a normal driver, it can reach directly to the place which cannot be reached without disassembling the surroundings, and Grip is easy to grip and can hang Torque firmly. View detail
Easy to grip, though.
It is not suitable for twirling.
The accuracy etc. is preeminent, and it is as if it is KTC.
You can turn the part with force without worry.
However, it is a little large pattern to use for motorcycle maintenance.
I'd like to see a small one in the line up too.
View detail
Purchased to match the Plus
Purchased to match my Plus Driver.
Square Type is easy to grip and easy to apply force.
It's a good shape for the Minus, which is prone to nicks.
But! Because the pattern is large, it is not suitable for tightening the exhaust band etc.
It might be a little disturbing.
View detail
Standard Driver
The VesselBrand is the best choice for the amateur and veteran. I always use VesselBrand because it is a product that I am sure to choose, and I can use it safely for a long time because it is excellent in durability. View detail
Convenient for battery replacement
Easy to use Size Quantity:The Set is useful for changing the batteries in the Key less key, the thinnest Minus can be used to unlock Wiring from the Coupler, and the tip is strong and unbreakable, so it's easy to use. View detail
It's very easy to use.
Firm magnetic force is applied by rubbing the Driver only about five times. Because the guidance to the screw pile to the narrow place can be done with the tip of Driver, it is very convenient. Of course, it is also effective in loosening the screw, so you can use it without worrying about losing it. View detail
Compact but effective.
This is a compact size motorcycle shock driver for motorcycles, but it is a sturdy and reliable shock driver. View detail
It is a useful tool.
I don't think there is another driver that is as easy to use as this one, and as the name implies, the Ratchet driver is easy to use with no complaints about screw tightening and loosening. View detail
Easy to use
[Contents] One set is also a great way to maintain your motorcycle and car at home. The price is affordable and very convenient. View detail
Easy to use
The Grip is easy to hold and very forceful and can be tightened and loosened with the Large Torque. The handle is just the right length and is a must-have for motorcycle maintenance. View detail
For OHLINSSetting
I bought this for Front fork DamperSetting in OHLINS.
It's a bar handle type so the tool didn't go in properly.
ANEX A Neck's Ball pointHexagonal WrenchDriver [vs. side 3×120] If you use a ball point, you can set it up with no problem, even if you put it at a slight angle.
A longer Type would have been better.
View detail
I love the color.
Tool Manufacturer is buying without limitation.
I bought one that I liked at the time, but this time I bought it because I liked the color.
Tools are not consumable, so we buy some expensive ones.
View detail