Reviews
![[iMMER] Smartphone Holder](https://img.webike-cdn.net/catalogue/images/73029/p05-img-KS219A_TS.jpg)
Sideways orientation for smartphone mount○.
This is a replacement for DAYTONA's Smartphone Holder.
Body and Bracket are Material:I chose it because it is aluminum, seems sturdy, and looks small and unobtrusive.
If the phone is clamped in the normal portrait orientation, there is no support on the bottom side, and I don't want it to fall if it gets loose, so I turned it sideways and clamped it. I am self-satisfied that it is more convenient because the Navigation map looks wider this way (laugh).
The body and bracket are ball joints, so it is convenient to change the orientation freely, but I am concerned about the durability of the nut for fixing the body because it is made of brass. And it is made inexpensively in China.
View detail
There doesn't seem to be a Brace function.
I bought it thinking it was a Handlebar Brace.
As stated in the Title, there is no Brace function.
Please note
However, the ZETA texture is indeed good.
You said there is no Brace function, but there is one that is not physically attached and one that is.
I think there is a slight difference.
View detail
I wanted 2Channel's.
I have been using Income, which is not conversational, while doing Navigation voice guidance on my phone.
Driving while glancing at traffic signs can cause you to miss them.
The cheap Chinese Income also lasted me 5 years, so that was good.
Income, a well-known name, is expensive, and I think I made a reasonable purchase that meets the conditions of use while reducing concerns about theft and breakage.
The thickness of the included Speaker is fine for my Helmet and the sound quality is not bad.
It may take some getting used to for switches that have the Click feeling of a round Button or a Click feeling in a place that is not the Center.
View detail
It looks nice.
The use of aluminum in some parts gives the product a slightly high-end feel. The three-point fixing system is firm and secure. The direction of fixation can be adjusted by adjusting the "Quantity:Pair (for Left and Right) Either one can be done, but the unlock lever is limited to a large mounting position. It is regrettable that the fixed arm comes to the position of the power button on my phone.
Also, it would be nice if the Arm can be shrunk without tools when not in use.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
This is enough for older smartphones.
My phone is an SE2, so this is good enough for me.
The only reason modern cell phones break due to vibration is because of the image stabilization.
If you don't have such a Camera function, it's a problem.
Damper is also not needed. I've already been using it for over 6 years.
The working part is hard and the SIDE stopper is hard.
It takes some effort to open, but once adjusted
If you do, the phone can be installed from the top.
The durability is tremendous because you can just slide it off and put it away.
Cheap Smartphone Holders break really quickly.
Without image stabilization, it is really a Recommendation.
Damper can be attached externally.
However, it is quite Compact, so the recent
Large LCDs are difficult to use, so the same system of DAYTONA
The Large type is out and that is Recommendation.
When it's out of the way, it's just one Bolt, except for Bracket.
It can be detached and attached.
View detail
It may be an individual difference, but Camera broke after less than a year.
I use two units.
One of our RearCamera units became defective after about six months.
I can say that it is to the extent that it is, well, I pulled a HaGap, but I am slightly unconvinced by the operation.
When there is a problem with the Camera, the LEDIndicator on the Switch blinks to let me know, but for some reason, other functions are malfunctioning in various ways.
It is supposed to connect to my phone via WiFi, but the connection is very unstable, and for some reason I could not connect to the Android app, even though the WiFi itself is connected.
Naturally, you cannot drop videos to your phone via the app, you cannot sync clocks, etc., and you cannot change various settings.
At least, the recording seems to be able to continue only with an active Camera.
I suspected a problem with the Body, but since I have two cameras, I tried connecting only the Rear Camera, which showed a problem, to the other Camera, which had no problem, and the application was connected and settings were available.
The LED indicator also seems to be unstable and may or may not display the status of a defective RearCamera, so I think it is better not to trust the operation when there is a problem.
If everything is normal, the camera is Large sturdy, so it might be a good idea to try connecting to WiFi once a month even if there is nothing going on, check if the app is connected, and check if the video is taken properly and the Camera is working properly.
The images that are taken are good enough to check the number of oncoming vehicles, etc., so the performance in that area is adequate.
View detail
I bought more.
I bought a Gixxer 150 with a vibration absorbing damper for my iPhone, which breaks the Camera with slight vibrations, and it's so good that I'm buying more for my DUKE!
However, this is for Android, which is less likely to break if dropped, so it does not have a vibration-absorbing damper. If you want to add it later, it will be more expensive and taller, so if you want one with damper, use it from the beginning!
Please refer to this previous Review for Body details and installation.
https://imp.webike.net/article/568346/
https://imp.webike.net/article/568539/
I was worried that the previous Holder would fall off at any time due to the limit, and it was a hassle to fasten it with rubber, but this Holder has deep claws and holds the thicker phone Firmly with SiliconCase + a credit card in it. This is really easy!
Unlike this picture, the bracket part is not the Quick Type with Screw clamp, but the Quick Type that can be detached by lever. However, if it is tightened with a wrench, it will not come off easily, and there is no such thing as Prank theft, so I am not sure which is better.
The lack of a damper makes it shorter and less wobbly when attached to a bracket.
As I mentioned before, my complaint about this is that the claws are Material:Plastic. I also see a lot of broken pieces. I wanted this part to be made of aluminum, but I guess it was unavoidable due to the reduction in cost.
By the way, if you are about to break it, Spare parts are sold in quintessential DAYTONA
View detail
Clamp Bar
The Clamp Bar I purchased this time is well made for the price, and I think the cost performance is high. View detail
The product itself is good, but the details are not so good.
I thought it was a good product because it can be mounted parallel to the handlebar at any distance, so it does not get in the way, and it allows for a sufficient length of bar to be effectively used.
However, the attached washer is a little small in outer diameter and not thick enough, and I am concerned about its strength when attaching the bar to the plate that also comes with the washer.
On the flip side, I could say that the Slide hole in the bar is too wide.
View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA Tricity155
KIJIMA Handlebar Mount Bracket
I was a little confused whether to mount the Handlebar Mount Bracket on the Handlebar side or on the top of the Meter, but I chose the type that I could see while riding. I used it twice on a touring trip and it was very easy to use. I don't mind even if it rains a little. View detail
It's neither good nor bad
I purchased a new adhesive Seat because I needed a new one to replace Income.
Naturally, since it is a DAYTONA OEM, we were able to use it without any problems in terms of size feel or adhesive strength.
However, even if you only want a sticky Seat, you can also specify a Quantity for the Parts of Others.:The problem is that each purchase of a set is a wasteful increase in the number of parts.
Also, perhaps because otherParts are included, the sticky SeatQuantity:I also felt the price was a little high for a 1pc.
However, in general, I have no particular complaints and will consider purchasing one if and when I need it.
View detail
I'm expecting Large!
I purchased this product to mount my iPhone 12mini on my ST250E.
I chose this product for vibration reduction after hearing that vibration can cause Camera failure.
I haven't installed it yet because the cold will kill my iPhone, but the product feels solid and looks great!
I expect that it will be easy to install because it is Quick.
View detail
EDR21A
We chose this product because it had good reviews and ratings.
The quality of the product was good and installation was not difficult.
The installation took about 3 hours, but it took longer with the Wiring routing, Cowl removal, etc.
The picture quality is satisfactory with almost no blurring, as I had checked on YouTube, etc. The Body is installed on top of the Battery under the Seat, and it fits well.
Microphone sound is also picked up at just the right volume.
I check the video by unplugging the SDCard from the Body, and the app is easy to use. There is also a way to connect to your phone via Wi-Fi and Download, but other people's reviews show that it takes longer with IgnitionON, so if you are concerned, it is better to unplug the SDCard to watch.
Overall, a very satisfactory product.
I don't know about durability as it has only been installed for a short time.
View detail
Good product.
I purchased MITSUBA based on your Review!
The Large size of Body is a little too large and the length of Camera's Wiring is a little too long.
I am generally satisfied to the extent that I was concerned.
Wiring on the Rear side is left over since the F/RCamera is common.
This type is not a problem because Space under Seat is wide Large.
I think the storage of Body and Wiring is Large in SS and SF Type.
I use Wi-Fi to check the video, but I can't get a connection in Preview.
I heard it was bad, but I had no problem with it.
*It was × on Android, so we supported it on iPad.
The video and performance are beautiful day and night with no problems, so the quality is ☆×4
As for durability, I just installed it. I'll give it a star×3
It is unclear what will happen in the future with warmer temperatures and the rainy season.
So far I think I made the right decision in buying MITSUBA!
View detail
for peace of mind
So far, I have not encountered any Trouble or problem with the Smartphone's Camera function, so I wonder if it is a good thing? View detail
Refreshing around the Handlebar
It was installed on the Top Bridge of a car that was converted to a bar handle.
I was going to install a Handlebar Brace on the Bar handle.
I tried several companies, but I couldn't get a Fit on the Handlebar.
I was worried about it, but I found a type of
This product does not suffer from that problem and can be positioned in various ways.
I think it is quite a useful product.
View detail
Old Type, but enough!
The new model is more waterproof, but if you install it properly and are careful when washing the car, the old model is fine and the image is beautiful.
The drawbacks are that the connection with SMA Four Pre cannot be made unless the connection is made with the in-flight mode, and the download of the image data takes longer than expected.
View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA Tricity155
KIJIMA Handlebar Mount Bracket
I think it is better than Handlebar because you can mount the phone on top of the Meter so it is within view and you can drive without having to be careful. View detail
Be prepared for anything.
[How is it used?
I installed it about a year ago because I didn't know what would happen.
Was the one you received as per Image?
The body is larger than expected and the wiring is thicker than expected, so it may be difficult to install depending on the type of car.
How was your experience with it?
I am satisfied with the Beauty of the image. Battery seems to go up because it takes a long time to upload to the app.
[Points to note]
In my case, I mounted it on top of the Front Fender, but when the Fork sinks, the Camera hits it.
How did it compare to other products?
Relatively Compact and seems to perform well?
Other items that would be helpful
Items to buy together
Number Bracket
View detail
Great build! Sturdy!!!!!!! But you have to get your own Rubber or you will Gap!!!!
As the title says. The build quality is great, but you have to prepare the rubber yourself (it deteriorates over time and must be replaced every year).
Gap falls off fast if you don't wrap it lol I wish it came with Rubber… The build quality is great!
View detail