Reviews
A broken item arrived
After installation, I parked and tried to put Handlebar Lock, but it did not take.
The locking rod does not come out, the key only rotates GRUGRU.
Japanese Vehicle Inspection Correspondence also made and I like the texture, so I was happy to change Large at the time of purchase, but I am disappointed with Large change.
The New Year holidays, correspondence seems to be at the beginning of the year, Timing is also the worst.
View detail
The texture is high
The appearance is high texture. However, since it is Handlebar Stopper, I do not see it at all after installation. Also, it is easy to wear it with existing Bolt as well.
I use it with ESTRELLARS 's OEMHandlebar backwards, but with this Stopper alone, since Handlebar still hits Tank, I've added my own Stopper.
View detail
Used for rh01j
If I grind with METALCompound it will shine and the Reverse side blew Clear for just in case, but in 1 year use it is rust etc etc. There is none.
At the same time I made a Separate handle of Fork Mounting after a while I noticed that this Bracket faced ↓ and attached directly under the Handlebar where the Clutch Cable rubbed and the coating of the Cable was scratched.
Currently it is up just above Three-Pronged Fork, up.
View detail
Fits: YAMAHA sulfur oxide (SO, SO2, etc.), YAMAHA SR400, YAMAHA SR500
I think that it is quite good
It is best to avoid rusting with Stainless Steel.
Installation does not cause problems for about 30 seconds
I think that it was still good if half price.
I do not know the angle because I still wear it and do not throw it away, but I'd like to ride a test ride
View detail
Necessary items around Handlebar RefreshingCustom!
In addition to ThrottleSwitch 's Custom, it was necessary to replace the Throttle holder, which was lost as other Manufacturer' s, but purchased here.
As a result, it was Large Correct !!
Making it solid enough to make the details, making Accelerator Wire 's Thailand co - mounting part and Throttle cone well, Housing fitting perfectly Fit and firmly fixed to Handlebar, as Aftermarket parts satisfied with Large change completed product I will.
Holder Only, so you need to purchase a special Throttle Wire separately, but if you are satisfied with this making it is still satisfactory!
Clearance of about 1 mm was made between Holder and Grip with 115 mm length Penetrating hole-free Type Grip, but there is no problem personally but rather Axel's contact with Holder and Grip during Throttle opening and closing There was no worry about getting stuck and this was a pleasant miscalculation!
Although installation is easy, since Accelerator Wire is only 1 pc of Pull Side, confirmation of throttle parts and daily inspection - Let's do Maintenance indispensable! (It's natural for safe use!)
Although it is my own preference, I was concerned about Holl Mount Bolt of the Minus head, so the hexagon socket M5 / We replaced it to 20 mmBolt.
By changing to Black of the same color as Holder, the feeling of unity was further increased and it became good looking enough to see it! (Sorry for self satisfaction .... )
Those who are considering simplification around Handlebar and Custom around Throttle, Large change Recommendation!
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SRX400, YAMAHA SRX600
WMWM (Wellington) Oil Filter with fin
It is scheduled to be installed at the time of Oil replacement.
I feel the texture of the product is Large Ideally Improved and Masculinity as Rugged.
O-ring is also used for OEM.
I am looking forward to the next Oil exchange.
View detail
Fender Eliminator to sudden rain...
Try!
So I tried to Middle with emphasis on practicality. Short, I can not bear with it too lol
I painted Black to eliminate the presence. The rain is safe with this!
View detail
Except for price I am satisfied..
Because NORMAL is poor, Quality will rise by installing this product. Depending on the Handlebar, the Lever length may be as long as 15 mm longer than NORMALLever so it may touch the tank. I used it for a while in combination with the company's Holder, but I removed it to refresh around Handlebar.
View detail
This fender fits perfectly Kawasaki W800, the width and length is very good. The quality of the chrome layer is very bad though. It is very easily scratchable, just after 2 weeks of usage chrome becomes dull and the reflections start to be foggy. I'm afr
This fender fits perfectly Kawasaki W800, the width and length is very good. The quality of the chrome layer is very bad though. It is very easily scratchable, just after 2 weeks of usage chrome becomes dull and the reflections start to be foggy. I'm afraid that after a few thousands kilometers and/or a year of usage the fender will need a proper service of putting new chrome layer. Or I will paint it black. View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W650, KAWASAKI W800
This fender is said to be made for Kawasaki W800, however the width is little bit too narrow. The quality of the chrome layer is very bad. It is very easily scratchable, just after 2 weeks of usage chrome becomes dull and the reflections start to be foggy
This fender is said to be made for Kawasaki W800, however the width is little bit too narrow. The quality of the chrome layer is very bad. It is very easily scratchable, just after 2 weeks of usage chrome becomes dull and the reflections start to be foggy. I'm afraid that after a few thousands kilometers and/or a year of usage the fender will need a proper service of putting new chrome layer. Or I will paint it black. View detail
The wing fell into place like a native! Exactly as described on the site. All landing nests matched. I will prepare for painting. Thank you
The wing fell into place like a native! Exactly as described on the site. All landing nests matched. I will prepare for painting. Thank you View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W650, KAWASAKI W800
Very happy with your purchase! The wing fell into place like a native. Exactly as described on the site. Just a chic look. (English) Very happy with purchase! The wing fell into place, like a native. Exactly matches the description on the websi
Very happy with your purchase! The wing fell into place like a native. Exactly as described on the site. Just a chic look. (English) Very happy with purchase! The wing fell into place, like a native. Exactly matches the description on the website. Simply chic appearance. View detail
This is the matching seat for the WM Special aluminum tank II. Installation is easy. You need to use the bracket and small rubber bumpers from the stock seat assembly. Be careful when removing the rubber bumpers. One of mine broke :( The seat wobbles a li
This is the matching seat for the WM Special aluminum tank II. Installation is easy. You need to use the bracket and small rubber bumpers from the stock seat assembly. Be careful when removing the rubber bumpers. One of mine broke :( The seat wobbles a little. I'm not sure if it's the missing bumper, but when riding the bike it is not noticeable. The cowl fits snug at the bolts but has some up-down wiggle room at the tail. Not terrible, but just something I noticed. There is not a lot of cushion and seems about 1"+ lower than stock. Still comfortable and overall great seat. View detail
The gas tank was shipped before the scheduled time that WeBike set which was awesome! The tank is a lot narrower than the stock tank and is very comfortable between the knees. It is a little longer and mounts at different holes. The finish is very soft an
The gas tank was shipped before the scheduled time that WeBike set which was awesome! The tank is a lot narrower than the stock tank and is very comfortable between the knees. It is a little longer and mounts at different holes. The finish is very soft and easily scratched. Be careful when installing! Included with the tank is a new petcock (no spot for the vacuum hose), gas cap and set of keys. This tank really changes the look of the bike. View detail
A nice looking and nicely made Cafe Racer seat. Because my riding is solo almost all the time, I especially like the removable fiberglass pillion cover for the few times a passenger may ride with me. The only reason I did not give a 5 start rating is the
A nice looking and nicely made Cafe Racer seat. Because my riding is solo almost all the time, I especially like the removable fiberglass pillion cover for the few times a passenger may ride with me. The only reason I did not give a 5 start rating is the loose fit on the bike's frame. I love the way the seat looks and it's quality, so I will fit and glue rubber tubes over the bike's frame to eliminate the excess clearance. Other than that, I am highly satisfied with this product. View detail
Well made kit that fit perfectly. The plate licence plate adapter has different hole spacing than the North American ones but not too difficult to adapt.
Well made kit that fit perfectly. The plate licence plate adapter has different hole spacing than the North American ones but not too difficult to adapt. View detail
The lower Continental handle was chosen in consideration of the seating position having become low by sheet exchange.[ -- WM:Continental-handle + DAYTONA: -- COZY-seat + pure: -- the stability of a linear Handling and a Corner was got in the combination o
The lower Continental handle was chosen in consideration of the seating position having become low by sheet exchange.[ -- WM:Continental-handle + DAYTONA: -- COZY-seat + pure: -- the stability of a linear Handling and a Corner was got in the combination of Back step ].The inclined attitude regards a few as it being hard to be tired also with a long-distance Touring from a pure Position. View detail
The Handle lock became possible. Required, if a Separate handle is used.
The Handle lock became possible. Required, if a Separate handle is used. View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
Since migration of a Blinker will be required if a Separate handle is used, it purchases by a Set. It is good to be attached simply.
Since migration of a Blinker will be required if a Separate handle is used, it purchases by a Set.
It is good to be attached simply.
View detail
Looks great, works as it should. No complaints. I think WM Got it right when they designed this one. Everything else is too short or too long, and it still functions well as a water suppressant.
Looks great, works as it should. No complaints. I think WM Got it right when they designed this one. Everything else is too short or too long, and it still functions well as a water suppressant. View detail