Reviews
good quality, perfect fit
I bought this clutch cable along with throttle and choke cables. This cable is 100 mm/10 cm longer than stock but I had no problems about them. The fitment is great. Maybe in the future, I may install an ape hanger to my bike and I can use that extra 10 cms. View detail
When you buy a motorcycle, start by replacing the handlebars!...
The cb1100ex's stock handle position is a very uncomfortable and ambiguous riding position.
Also, because I have a cervical disc, I have to lean forward a little and the weight of the helmet puts a burden on me, making it uncomfortable for long distance riding.
However, if you replace the handlebar with this handlebar, the position changes to almost 90 degrees and there is no strain on your arms or shoulders.
cb1100ex absolutely has this handle. -------------------------------------------------- -------- CB1100EX's genuine handle position is a very uncomfortable and ambiguous riding position. And because I have a neck disk, I bow down a little bit in the future. However, if you replace it with this handlebar, your position will change to 90 degrees and you will not be overwhelmed by your arms or shoulders. CB1100EX is unconditionally handle. Powered by Google Translator
View detail
Long distances are now easier.
It was a HURRICANE European2 type Handlebar, but I wanted to make it a little wider, so I changed it to a Z2 Type.
I have only been out for Touring once, but it was easy Touring down the road for about 200 km.
We asked Shop to do the installation and are satisfied with the careful work.
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GSX400, SUZUKI ST250 E Type, SUZUKI ST250, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100
First Handlebar Replacement
[How is it used?
XJR400R (RH02J) I was looking for an external Handlebar to change the Spec. of the Pipe Handlebar of the
We chose this product based on Manufacturer, price, and fit information.
Was the one you received as per Image?
Good texture for the low price.
Was the installation difficult?
In my case, drilling was unnecessary because the previous owner had already removed the protrusion on the Switch side when he replaced it with an external Handlebar.
Therefore, installation was completed in about 30 minutes.
It is not that complicated and can be done with common tools.
However, the label with the part number, etc., does not peel off cleanly at all, which is frustrating. I finally gave up because it is not visible. (Lol)
How was your experience with it?
The Handlebar's texture is not cheap and has a nice feel to it.
I am satisfied with the Position as well as the Style to my liking.
[Included Parts:were they on?
HandlebarBody only.
[Was there anything that disappointed you?
The Bar End must be somewhat long because it is rather short for XJR.
【Review】
The quality is solid for the price and the satisfaction from the replacement is high.
There seems to be no problem with the fit itself, but I wonder if something longer by one Size would be better. I think it would be better to use a longer one.
View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
Good quality but high price compared to other companies' products
[How is it used?
Purchased to install Smartphone Holder.
Was the one you received as per Image?
It was just like Image.
Thanks to the comments on the app about compatible models and your impressions, I was able to install the Image as it was before I bought it.
How was your experience with it?
It looks like it can be attached to more than just the Smartphone Holder, so we plan to add an ETCCard and a Drink Holder.
[Points to note]
Check the conformity of the WeBig application, and check the dimensions if the Handlebar is narrowed down.
Needless to say, if the length is set to the Limit, it will interfere with the Master Cylinder, etc., so be sure to confirm the length in advance.
View detail
Could be a little cheaper.
I didn't like the Position on the Gixxer 250, so I added it.
The installation was easy, but the Rear Brake Hose and the Hose from Reserve
I'm concerned about being pulled and losing room.
The protrusion of the side stand interferes with the side stand, so it is necessary to cut or bend the side stand.
I found a very similar product at a very low price on the worldwide OaktionSite and I had mixed feelings about it!
View detail
It's neither good nor bad
hrc grom (JC92) The Handlebar Stopper must be installed. (If not, the Switch box will interfere with the TankShroud.)
It is about 4 cm lower than the OEM Handlebar and is suitable for Sports driving.
One drawback is that it bends easily for Steel. Even a fall and a light hit often results in bending, and I have used three of the same product in one year.
View detail
HURRICANE LongThrottle Wire GPZ900R
I received the product immediately after purchase and am very satisfied with it.
I'm sorry
View detail
sending a car to look at something
I don't know about the use of the W because it is still shipping to see it after 5 months. View detail
It is easy to install.
It is easy to install., Wire, Hose, etc. were Large sturdy with STD Size! View detail
HURRICANE Helmet lock
Helmet lock made by KIJIMA until now 。 The Helmet lock made by KIJIMA had to use a Helmet holder, but Made by HURRICANE can be locked without using a Helmet holder because the installation location can be decided relatively freely. The KIJIMA Helmet lock had to be used with a helmet holder, but the Made by HURRICANE can be locked without using a helmet holder because it can be installed in any position.
The U-shaped part that moves when locked is the Quantity:Pair (for Left and Right) The lock hole was not always easy to get into, but this was not a big concern. However, it does not bother me that much. I think Merit is a very good product because it is larger than Merit and I don't have to use the helmet holder anymore.
View detail
Fits: KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W400, HONDA MONKEY, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA NC700X, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA MONKEY, KAWASAKI BALIUS2, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, HONDA CB1100
It's exactly what I expected.
I bought a used CB400SS with a Swallow-type handlebar, so I replaced it with this one.
Back pain sufferers have a hard time leaning forward.
View detail
Fits: Others , KAWASAKI W400, KAWASAKI 250TR, HONDA FTR223
Retro Style
Used several times on other motorcycles with my favorite Handlebar to customize it to a Retro style.
The ST250 is used this time, and it needs to be modified to fit the car model since it does not have holes.
View detail
Separate handle by all means!
If Separate handle is selected, the NORMAL clutch wire will be too much.
What kind of harm will be done?
The Clutch is not turned off, but it is turned off, or at worst, it gets tangled in the Wheel and becomes Large.
Shorting is necessary to prevent these problems.
It is -100mm shorter than NORMAL.
good point
When separate handle is used, the clutch is cut smoothly.
XX semi-cra is also easy.
There is also the rigidity of the ○Cable.
The price is also low.
A bad point
Installation is troublesome.
○Peasy to rust if lubrication is neglected.
I need a Cable that matches the length of the Handlebar.
For Separate handle, Normal cable should not be done in the sense of prevention.
View detail
Fits: HONDA CB750F, HONDA CBX400F, HONDA CBX550 F/INTEGRA
No problem if not OEM
The Tachometer needle started to dance, so I wanted to replace the Cable just in case before the MeterOH.
I was going to go with OEM Product, but chose here with Point.
The actual installation was no different than the OEM product and there were no problems with operation, etc.
View detail
Fits: Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, HONDA MONKEY
TW200 with HURRICANE Narrow4 type
None of the stores carry the HURRICANE Narrow4 model,
There were few installation Images on the Internet, and I bought one or two without seeing the actual product.
I originally used DAYTONA's Dart Rubber (width 80cmOver), so the width of 68.5cm felt very narrow, but I got used to it within a week, and the Position is easier to ride than with the Dart Rubber.
The result was a good purchase.
It looks a bit Mischief, but when you ride it, it doesn't feel that way at all.
I hope the installation photos will be helpful to someone.
View detail
Mood changes.
[How is it used?
It was put on the Meter of a YAMAHA TZr50R under Restore.
Was the one you received as per Image?
When I first saw it, I thought it was the real 120km. However, upon closer inspection, I realized that it was a Seal.
I think it is good because it is not immediately obvious to a stranger.
Was the installation difficult?
I think it is easy if you degrease it well and do not shift it.
How was your experience with it?
It would be useful to have a 50cc 2st that swings through the meter.
[Included Parts:were they on?
None in particular
View detail
Fits: HONDA NC750X, HONDA NC750X, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI ST250, SUZUKI ST250 E type, SUZUKI volty, YAMAHA XJR1300, YAMAHA MT03, HONDA CB500X, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225, YAMAHA XJR1200, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200
It's fine.
The front end has been eliminated and driving has become easier. View detail
Used to install external grips on af09.
[How is it used?
Used to install external grips on af09.
Was the one you received as per Image?
Yes.
Was the installation difficult?
Easy
How was your experience with it?
Made by HURRICANE for safety and security.
It looks Simple and cool.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Used to attach external grips to af09.
[How is it used?
Used to attach external grips to af09.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It is easy even for beginners as all you have to do is put it in the handlebar and turn the hexagon.
How was your experience with it?
Made by HURRICANE for safety and security, Simple and cool.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail