Reviews
Maybe a little wide.
OEM was far and low and had to be replaced.
Accelerator Wire was easier to install than MT09, but
The air drainage of the brake hose and clutch hose was Large strange.
The fit feels a little wide.
View detail
Very high quality grips...
Indispensable for bobber and cafe racer projects,I choice these grips in my xs project.These grips are Gran Turismo style reproduction grips.It has a historical connotation..These grips are very comfortable. I have had a lot of expensive grips over the years, and these are just as, or more, comfortable. Easy to grip, even with gloves. I love the look , kind of simple old school.Materials appear solid and only time will prove otherwise.Properly sized for throttle tube and handlebars.It is easy to assemble, it does not move on the handlebar. You can apply some glue if you want.I definitely recommend and the price is hard to beat. View detail
Fits: YAMAHA XJR1200, YAMAHA XJR1200R, YAMAHA XJR1300, SUZUKI INAZUMA400, SUZUKI INAZUMA1200(GSX1200FS), HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Handlebar cannot be installed without it.
I bought this Holder together with the Top Bridge for my ZZr Bar handle, and since the Top Bridge is also a HURRICANE, I was able to install it without any difficulty. I am satisfied with the position, not too far and not too close. View detail
Purchased this one due to bar handle change
Purchased this for my Pipe Handlebar conversion. The construction is good and I am satisfied. The installation itself is not difficult, but it is troublesome because it is necessary to completely close around the handlebar. If you do the other work together, you only need to do the whole rose once. View detail
It was easy to install.
I didn't have a problem with it.
It would have been nice to have some sort of instruction manual.
It was so easy that I forgot to take pictures!
Prahan or Rubberhan is easier to work with.
I think it is better to wet the parts with Parts cleaner than silicon spray before insertion.
View detail
Bar End
It must be cheap, but this is how it is. View detail
Fits: HONDA HORNET250, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SF, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
Longing for Separate handle
CB400SB (2014) The LeftRight Switch Box has a small protrusion on the vehicle's LeftRight Switch Box. The LeftRight Switch Box of the vehicle has a protrusion, so it is necessary to drill a hole in the handlebar side. It was a large problem to decide the drilling position while adjusting the Master Cylinder and Brake hose so that the handlebar end would not hit the tank when cutting all the way off. I really wanted to use a separate handle, but I am satisfied that the cowl position, hose, wires, etc. were all installed as OEM. View detail
Small size change, Large effect
[How is it used?
To change the position of DL1000 V-STROM650, which seems to fit but is slightly uncomfortable.
Was the one you received as per Image?
The quality is high, but the price is … hey?
Was the installation difficult?
If you can use hexagonal, it is easy.
How was your experience with it?
It is worth a try if you are feeling distant from Handlebar.
Fractional quantity without the need to replace cables:SetBack, but I could feel the effects.
Quantity, even with very cheap similar products from overseas companies.:I think the effect of the SetBack is the same, but it seems unlikely that there is a form that moves back without giving this height.
The other question is how much attention is paid to texture.
[Included Parts:were they on?
Bolt hole hidden Cap was included.
[Was there anything that disappointed you?
Why not make it a little more affordable?
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy
GRASS TRACKER It was a long time for BIGBOY.
It was too long for GRASS TRACKER BIGBOY. We managed to get it to fit in the car by working out how to handle it.
Clutch has been revived.
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CB300R, HONDA CB150R
It is a good item
The OEM position was wide and forced the driver to lean forward, but by replacing it with this handlebar, the driver can now drive in an easy and compact position. View detail
If it is a bit cheaper
It is a must have product to replace a different handlebar diameter, but a lower price tag would be better.
Also, if you could include a thin double-sided tape, it would make positioning easier.
View detail
Fits: KAWASAKI ZZR1200, KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11
Changed to Long cable due to change to Handlebar Up Type.
I changed to a long cable because I changed to a Handlebar Up Type. It is a little bit long, but it works fine. View detail
It was a little long.
Changed to Long cable due to change to Handlebar Up Type. It is a little long, but there is no problem in use. Conversely, the Handlebar can still be raised.
Installation was troublesome with the carburetor part.
View detail
Top Bridge has been changed to One point.
I replaced the handlebar for my own satisfaction. I think it is a very satisfactory product, although it is a casual part because it is the place where it enters the medium eyes of the driver. View detail
I can't reach it.
Six months past the time I placed the order in the first place, and I haven't received any reply.
From a one-way email that delays delivery
Cancellation of order due to lack of Manufacturer.
TV show, video game, etc. that has jumped the shark
View detail
I like the shape ….
Replaced with SP Mukawa's Carrier.
I bought this because I wanted a Grab Bar in this shape with a plating type. I am satisfied with the shape as I expected and it is easy to handle in my garage.
It is easy to install and remove, so I use the Grab Bar for everyday city driving and the Carrier for the occasional can-two or luggage.
View detail
I think it's good
It is a good product with a beautiful finish.
If I had to say something, it would be nice to have a more vertical lineup to prevent mud splashes.
View detail
It is a little regrettable.
Installation is easy due to the precision of the product.
However, the cord of the License lamp is halfway long and the attached Extension Cord is connected in a place where it is likely to be flooded.
I extended it with a solder and insulated it with a Shrinkable Tube.
The Others is a product I have no complaints about.
View detail
Convenient.
I was looking for it because I got bent out of shape standing up.
Separate handle category only by car model, and not in the Separate handle supplemental parts category.
If it only appears in the Handlebar category, it won't be found.
in a hurry
According to HURRICANE officials, the effective length of the handlebar differs for each car model.
CBR250R that turned. (MC41) Effective length 205mm for
The one I bought this time is the Universal one from for Repair, 217mm.
The former is a bit helpful because the Handlebar length is quite short and the Switch box was also Limit.
Incidentally, I asked HURRICANE officially if there was anything longer than this, and they said this is the longest.
I would like to see the information properly posted by car model if possible, though.
It's not so friendly, though, because it's often out of stock, and the model number is not listed in the official HURRICANE website, and it's hard to find the official HURRICANE website in the first place,
The angle can be easily adjusted, the holder is strong, and as long as you have the holder, you can use it in any way you want.
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CB300R, HONDA CB150R
ThankfulQuantity:Set
The parts I used on my previous motorcycle were too large (22mm) to be installed on my CB250R with a taper handlebar, so I changed to this product.
The holes for Spacer and Switch box have already been machined, so this Quantity:I am happy to complete the project with only Set.
The mounting angle must be fixed slightly up, otherwise it may hit the tank cover at full lock, so care must be taken.
View detail