Reviews
rather, on the Motorcycle, I think that a Front especially -- requires the Brake hose of a Stainless mesh. Since the Mesh hose is altogether put into the Motorcycle which has ridden until now [ ], it is touch called a standard equipment article indiv
rather, on the Motorcycle, I think that a Front especially -- requires the Brake hose of a Stainless mesh.
Since the Mesh hose is altogether put into the Motorcycle which has ridden until now [
], it is touch called a standard equipment article individually.
There is nothing and a Touch improves also until it says.
Since there is no touch which is slippery although braking can be begun quickly and it grasps since
power cannot escape easily, brake operation becomes possible, without putting in strange power.
I think that it is a good Parts also when the use in a long distance, of course, reduces the degree of fatigue in a place with much go & Stop in the streets.
View detail
[Webike Monitor] Aren't they goods which have the ? Dress-up effect up that effectiveness became good rather than the NORMAL, and do not have loss?
[Webike Monitor] Aren't they goods which have the ?
Dress-up effect up that effectiveness became good rather than the
NORMAL, and do not have loss?
View detail
[Webike Monitor] If compared with the NORMAL, effectiveness will be happy for the direction of a Mesh hose in the same quantity 握.
[Webike Monitor] If compared with the
NORMAL, effectiveness will be happy for the direction of a Mesh hose in the same quantity 握.
View detail
Finishing [ a Front ] of exchange with a Stainless mesh hose together when brembo-izing. At this time, selection of the Hose became a Buildaline, as a result of leaving it to a store. it decided to resemble it subsequently and to also exchange a Ho
Finishing [ a Front ] of exchange with a Stainless mesh hose together when brembo-izing.
At this time, selection of the Hose became a Buildaline, as a result of leaving it to a store.
it decided to resemble it subsequently and to also exchange a Hose for it, since it had to stop having to attach a pressure switch although Back-step wearing is carried out this time [
].
The reason for having chosen this product was only made consistent with the Front (^_^;) I think that making
itself is not bad.
Although there was also a product made from an Aluminum, when durability was considered, the direction of the STAINLESS STEEL regarded the
Fitting as good, and made it the product made from a STAINLESS STEEL.
View detail
When it was a Black in the Stainless banjo, since there were few choices, they were made into this. Since he would like to leave a pure atmosphere as much as possible, neither the red of an Anodized nor blue wanted to buy a Banjo. Since it is a Spa
When it was a Black in the Stainless banjo, since there were few choices, they were made into this.
Since he would like to leave a pure atmosphere as much as possible, neither the red of an Anodized nor blue wanted to buy a Banjo.
Since it is a Spanner which is 11 mm although it is necessary to fasten the
Banjo, cautions are required.
A fasten lump is sweet, and exhaust air omission of the Fluid did not finish till when, but
one has consumed time and a Fluid vainly.
It is satisfied with the quality of the
products.
It is a good thing corresponding to a price.
View detail
I thought that there was no feeling of unification if only rear is genuine, and I purchased. Since it has equipped with the rear fender of an external product, there is no dissatisfaction in particular other than it having become impossible to use the hos
I thought that there was no feeling of unification if only rear is genuine, and I purchased. Since it has equipped with the rear fender of an external product, there is no dissatisfaction in particular other than it having become impossible to use the hose through hole on a swing arm. View detail
[ -- the Webike Monitor ] -- it is thought that it was easy to carry out a Control of the Brake, and became compared with the pure Hose.
[ -- the Webike Monitor ]
-- it is thought that it was easy to carry out a Control of the Brake, and became compared with the pure Hose.
View detail
[Webike Monitor] Parts were replaced to GSX-R600 of the friend. It is the impression tightened on the Black Hose & Black Banjo. The Pad chose ZCOO. It becomes pleasant that effectiveness and a Touch run perfect.
[Webike Monitor] Parts were replaced to GSX-R600 of the
friend.
It is the impression tightened on the
Black Hose & Black Banjo.
The
Pad chose ZCOO.
It becomes pleasant that
effectiveness and a Touch run perfect.
View detail
Although the correspondence vehicle type serves as 08 to 11 MODEL and it did not understand whether arrive at 12 MODELs, it has attached satisfactorily. The Lever touch in early stages of became good.
Although the correspondence vehicle type serves as 08 to 11 MODEL and it did not understand whether arrive at 12 MODELs, it has attached satisfactorily.
The Lever touch in early stages of
became good.
View detail
Since the description of attachment is not contained ... -- it attached by old experience well. although management of S Type was the first -- -- it exchanged somehow, and exhaust air omission carried out and it completed. Its de
Since the description of attachment is not contained ...
-- it attached by old experience well.
although management of
S Type was the first --
-- it exchanged somehow, and exhaust air omission carried out and it completed.
Its device is required for fixation of the portion which becomes two.
It is the satisfactory engine performance peculiar to a Mesh efficiently.
View detail
The delicate effectiveness of an authentic positive one is unclear. He thinks that it is what is stronger than an Aluminum since it is a product made from STAINLESS STEEL, and it purchases. Since the Aluminum had been before folded at the time o
The delicate effectiveness of an authentic positive one is unclear.
He thinks that it is what is stronger than an Aluminum since it is a product made from
STAINLESS STEEL, and it purchases.
Since the
Aluminum had been before folded at the time of a fall, it was anxious about it.
The Rubber of attachment of a Fitting will be too small and it will merely escape from the Clamp of Hose fixation.
One more Rubbers etc. are rolled, were fattened and it had to fix.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
"The brake touch became quite good when it was attached to Address V125GK7. The disagreeable point that it is a several millimeters deeper when I grasp the lever at the time of hard breaking was lost. Subduction of the part whose brake merely came to be e
"The brake touch became quite good when it was attached to Address V125GK7. The disagreeable point that it is a several millimeters deeper when I grasp the lever at the time of hard breaking was lost. Subduction of the part whose brake merely came to be effective directly, and a front began to be violently worrisome. Strengthening of the front sus may also be necessary. As a supplement, an 11-mm spanner is required for bolting. Although I have many tools, there is no 11mm and I coped with it by the adjustable wrench hurriedly. I recommend for who attach by oneself to prepare a single ended wrench (BTW the air breeder bolt of Bbrembo is also 11mm)." View detail
Fits: YAMAHA Cerro 225W, YAMAHA Serow 225WE
Since the normal hose of serow 225WE had passed for 13 years, the good ridge attached also to MT-01 was attached. If a thin mesh hose is attached as it is since the fairly thicker protective tubing is attached to the normal hose, in the stay for hose
Since the normal hose of serow 225WE had passed for 13 years, the good ridge attached also to MT-01 was attached.
If a thin mesh hose is attached as it is since the fairly thicker protective tubing is attached to the normal hose, in the stay for hose fixation of normal, it is unfixable.
The protective tubing of the normal hose was cut off and transplanted and it fixed.
In the direction which a brake touch worries, it is recommended.
View detail
The angle of the banjo bolt was not quite satisfactory. He plans to change for 45 degrees.
The angle of the banjo bolt was not quite satisfactory.
He plans to change for 45 degrees.
View detail
Since it attached also to front Buell and smart one was found, it decided to exchange also for CBR. there is only a Set article truly -- a size -- exactly . In attaching the joint of T character, uneasiness remains a little.
Since it attached also to front Buell and smart one was found, it decided to exchange also for CBR.
there is only a Set article truly -- a size -- exactly .
In attaching the joint of T character, uneasiness remains a little.
View detail
It is used for CB400SF. The amount of grips of a lever also decreases and it becomes very easy to treat. Since power did not escape, even if grasped by the same power, brakes stronger than the time of pure could be applied. It is one of the pa
It is used for CB400SF.
The amount of grips of a lever also decreases and it becomes very easy to treat.
Since power did not escape, even if grasped by the same power, brakes stronger than the time of pure could be applied.
It is one of the parts which blunt I have also fully realized.
View detail
It exchanged for the first stage type R1 with the front. As I had a habit to which the brakes of RIA are applied strongly a little, I might act as Locke. Although deceived in brake adjustment of RIA, it changed drastically from the pure intention.
It exchanged for the first stage type R1 with the front.
As I had a habit to which the brakes of RIA are applied strongly a little, I might act as Locke.
Although deceived in brake adjustment of RIA, it changed drastically from the pure intention.
This comes to understand the charge condition of a brake by Satoru Taisho at a direct, and it can take cooperation of a brake now well with a front.
It is large gratitude at the parts which support my HETAKUSO riding.
View detail
The first stage type R1 was equipped. How to require a brake was felt for the direct as comment, the snap and the brake could be operated satisfactorily, and it is very much satisfied. Since it is a mesh of a clear also in appearance, admiration h
The first stage type R1 was equipped.
How to require a brake was felt for the direct as comment, the snap and the brake could be operated satisfactorily, and it is very much satisfied.
Since it is a mesh of a clear also in appearance, admiration has come out custom, and it is a recommend.
Although exchanged together with RIA, work was not necessarily so serious, either.
Since the brake was one of the important life-threatening parts, it did not tamper to HETA, but although it keeps pure, it was changed drastically and was a correct answer.
It became the illusion in which breaking carried out improvement in a top ranking.
In practice, .....
View detail
Since the pure banjo bolt was rusty too much, the whole brake hose was exchanged in passing. It compares that it is pure and a brake came to consider it as a snap. The appearance of a stainless mesh is also quite good.
Since the pure banjo bolt was rusty too much, the whole brake hose was exchanged in passing.
It compares that it is pure and a brake came to consider it as a snap.
The appearance of a stainless mesh is also quite good.
View detail
When handle exchange was carried out to 80 classics of hurricane, by the brake hose of normal, die length ran short, and since it has been in the state where a brake lever must be brought near inside and must be attached, it decided to exchange brake hose
When handle exchange was carried out to 80 classics of hurricane, by the brake hose of normal, die length ran short, and since it has been in the state where a brake lever must be brought near inside and must be attached, it decided to exchange brake hose.
Although the lineup of the object for the boulevards 400 is carried out to the bolt on kit according to vehicle type,
- it is described by the object for boulevard 400 K5, and the catalogue (L0 differs in the form of a master cylinder) -- in the brake hose of - normal, die length is insufficient Since it differs from the handle form of - normal,
From what is set to the kit from the first The angle of the banjo adapter by the side of - master cylinder is changed into side 20 degree for - brake hose die length 1010 mm.
Since the brake hose was slightly too long after exchange, they have differed management of speed sensor dent exchange before.
Possibly 985 short mm was good one size.
Although there is no telling whether brake performance became good, since texture, such as a brake hose and a banjo bolt, improved, it is satisfied.
View detail