Reviews
Light Guard
I could have used a cheap Chinese one, but I thought it would be better to put on something more appropriate for my age, so I bought this one.
Installation was relatively easy as it can be done with 3 Bolt.
I'm happy with the way it looks.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF300RALLY, HONDA CRF300RALLY(S)
ZETAHeadlight guard CRF250
I chose it for its Brand power and I was right there. It looks very rugged. However, it is too tough, so it depends on your taste. The installation is relatively easy if you have the right tools. Be careful not to scratch the GuardBody or the car body. If you are worried about it, you can use Tapeetc. to protect it. I don't know if the screws will loosen, but it may be necessary to check the tightening periodically or to apply a very small amount of screw lock agent. The cost performance is up to the buyer, but I think it would be higher if it didn't have the ZETA logo on it.
But overall, I'm satisfied with Large.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF300RALLY, HONDA CRF300RALLY(S)
Wow that's cool
There is no doubt about this.
I like it very much
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1 (900SUPER4)
It's a modest but …
The construction is quite crude.
BALI, etc., can be cut and beautified with Scissors.
View detail
Easy to set up And its looking good!
This pocduct is Easy to set up And its looking good! It got a well pratection for the front light. And it is fit for my new 2022 xsr700 as it is a DEM. Highly recommend to take this stuff and make your bike looks more vintage. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Arrived quickly
Easy to install, but was slightly thick to put over current headlight. It fits but is a very tight fit. It's is a plastic cover that jus covers the current headlight. View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA CT125
2021 Monkey 125 Headlight Guard
Shipping is fast, but the customs office takes a long time.
It's not cheap junk from Ali, but it's very sturdy and sturdy, so it's well made.
It does not look excessive and goes well with the monkey headlights, and it does not block the low visibility of the headlights.
Thanks for the good stuff. ------------------------------------------------------------ -------- Delivery is fast, but it takes a long time by the Korea Customs Service. It's not a cheap season sold by Ali, but it's very strong and great. It doesn't look over, and it goes well with Monkey headlights, and it's good to evaluate because it doesn't have a weak headlight. Thank you for good things. Powered by Google Translator
View detail
For light protection and dress-up
good point
Light can be protected
... be cool.
A bad point
Light gets a little darker.
Installation was easy after reading the Instruction Manual.
However, since the light influence on the light is large depending on the installation angle, it is necessary to work while confirming the angle of installation.
It comes with a polycarbonate board, so it can be protected from small flying stones. The board can be purchased as a Single Body, so you can rest assured.
View detail
Dress-up
I think the purpose of this is to protect the headlight from mud, stepping stones, tree branches, grass, etc., but in reality, I think the dress-up effect is much larger. It's just a small part, but I think it looks much better. View detail
Fits: HONDA TRAIL125, HONDA CT125, HONDA CT125, HONDA MONKEY125, HONDA MONKEY125
Unique design
Installation is very easy and the design is unique. Acrylic plates for protection were included, but I didn't use them. Anyway, I like these parts. View detail
The quality is okay, you get what you pay for
The guard fits well with the headlight, the outlook beats other brands', that is for sure. The installation is extremely easy, it only took me 5mins. And I am sure the plastic cover will do a descent job in protecting the light. However, the quality is just okay, I had to sand the entire guard again because there were many steel burrs, but it's okay for those who are fond of handcrafting. I resprayed the guard in camouflage green since it fits my bike better. All in all, I am satisfied with the final result. View detail
cute little
I'm very happy with this product. View detail
Fits: BMW R1200GS LC Water Cooling, BMW R1250GS Adventure, BMW R1250GS, BMW R1250GS Adventure, BMW R1250GS
We were running low on parts.
Webike was able to install the bracket without any problems.
It's protecting my expensive Headlight from Dirt and high speed honey stones.
Also, night driving is not a problem without getting dark.
View detail
A little disappointing
I installed it for dress-up purpose.
BALI is terrible and M4Washer is Quantity.:I was a little disappointed that I was 1pc. short.
I am satisfied with the Design.
View detail
Fits: TRIUMPH Bonneville, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100 Black, TRIUMPH BONNEVILLE T120, TRIUMPH Bonneville T120 Black
A quick dress-up
[How is it used?
I installed these on my BONNEVILLE t120 at the same time as the OEM Headlight visor.
Was the one you received as per Image?
There was no difference from the picture in the product description.
Was the installation difficult?
The installation itself is not particularly difficult, but the Headlight is installed in the Quantity:Pair (for Left and Right) Because it is necessary to remove the bolt which is fixed with the bolt, the optical axis will be shifted before and after installation. I adjusted it by myself somehow, but I think it is better to leave it to PRO if you are worried about it.
When I install it, I remove one Bolt, and cotighten this Guard, and then install Quantity:Pair (for Left and Right) and worked to prevent the Headlight from dropping out.
The instruction manual is written in English version and German, but the installation method is simple and there is an illustration, so you will not be lost.
How was your experience with it?
I don't plan to attempt a Situation where this Grill would be effective, but I chose it for the Visual aspect, and I'm happy with how it turned out as Image.
[Included Parts:were they on?
There was no shortage.
[Was there anything that disappointed you?
Not particularly
View detail
Fits: HONDA Zuma X, HONDA Zuma X
Design is good, but there are concerns about the precision of workmanship and adhesion.
The dress-up effect was obtained reasonably, and I am satisfied.
However, I should say that the price is reasonable, and I feel that the low precision of the work described later is a waste.
It is not a shoddy product and Recommendation is possible, but excessive expectation is not.
The honest answer is that it is neither possible nor impossible.
This product is worn over the Light, but it has almost no effect on visibility.
Headlight looks a bit like a thin line of shadow, but it is available as usual.
There may be individual differences, but the one I bought is quite large BALI.
It remains everywhere, and if you're worried about it, it's going to take a lot of work to get it cleaned up.
In addition, because installation is performed with the small double-sided tape attached to the body, it is possible to suddenly remove the tape from the body.
I have an uneasy feeling that I might fall.
Currently, I've run about 600km since I installed it, but I don't see any tendency for it to peel off.
Maybe it's just insecurity and the adhesive performance is not bad. I hope that my fears are unfounded.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1 (900SUPER4)
I'm just grateful to be selling it.
Once you buy one, you won't have to replace it so often.
It's hard to find a good substitute and I think I'll be buying this product. pmc's Material:It's lasted a long time for a Rubber product. (About 6 years)
View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110 (Model 2BJ-JA45), HONDA CROSS CUB50(Model 2BH-AA06)
I hope it looks good!
I installed it from the aspect of headlight protection. It is easy to install and I feel that it doesn't affect the illumination of the Light too much when driving at night. View detail
Better/Bad
The fitment was for the NORMAL CRF1000L, but since the mounting part was the same shape, it was installed on the AdventureSports.
The Bracket is solid and does not shake due to vibration.
The lens is also made of thick and sturdy material, so you don't have to worry about it breaking if a small stone hits it, and the transparency of the lens is high, so the light doesn't get dark or the optical axis doesn't scatter in the day after tomorrow.
Even from a distance, you don't feel like you're wearing a Protector, and it fits in SMART.
The only thing that bothered me was that it was hard to remove the Lens when I wanted to wipe the back of it.
The thing of the other manufacturer is Quick Release, and it has become easy to remove, but this has to remove 4 places of the pole SmallScrew.
If it is only to remove the screw, it is not enough, but two pieces of plastic washer are bound to one screw by Nut, and if it is removed without knowing the existence of Washer, it will be lost.
You can also set the bottom of the Bracket to Quantity:It is fixed to the frame with 2pc bolts, but the supplied bolts are longer than necessary, and they touch the inner cowl at the top of the bolts.
Because it is Cowl of the part which is not seen so much, a little Damage can be meditated, but it is good luck to prepare Bolt by oneself if it is concerned.
View detail
Off-road feeling up!
I bought it for Off-road feeling UP. There are many similar ones out there, and I looked for the cheapest Type.
The turning stopper is a little bit out of dimension and it doesn't fit in the hole but bites into the frame. Once you put it on, it's rare to take it off, so I don't think it's a problem... (laughs)
View detail