Reviews
Powerful
I needed to reattach the Bracket to attach the Camera to the Helmet and purchased the Seat type.
I have been using a bracket of the type that can be attached to a rec mount in order to operate a Camera that is used as a DriveRecorder by attaching it to a helmet. Previously, I was using DAYTONA's DDR-S100 attached to the helmet, so the Bracket was originally attached, but it was removed when the helmet was repainted, so it was necessary to prepare double-sided tape to reuse the Bracket. To reuse the Bracket, we needed to prepare Double-sided Tape.
Since it would be very dangerous if the Camera were to fall out of the helmet while driving, we decided to use a strong double-sided tape and a single piece of double-sided tape.
If it is for the inside of the car, we had Seat type Double-sided Tape in stock, and it seemed to have enough adhesive strength, so we thought about using what we had, but since we cannot say that there is no possibility of driving in the rain, we purchased Double-sided Tape for the exterior that seems to be strong against wind and rain, just to be safe. However, since there was no guarantee that I would be able to run in the rain, I decided to purchase double-sided tape for the exterior that would be resistant to wind and rain.
Since this product is rather thick, it would be better to use a cutter that can cut well when cutting it out. In addition, although it is a basic thing, I think it is better to clean the surface to be pasted, to degrease it firmly, to paste it in one shot at the targeted position, and not to mess with it for about one day because it is not firmly attached immediately after being pasted. As for the cutout, the cross section was rough because it was inevitably cut by hand, but generally, I think it was pasted in a good way. Since it is firmly attached, it is unlikely to be dropped while driving.
The price seems high for Size, but I am satisfied with the results as expected.
View detail
Pricey but convenient for beginners
I think it is very convenient for amateurs to connect Motorcycle wires such as Blinker or Tail lamp. First, strip the cord, twist the wire that appears, insert it into the hole in the plastic part of this Connector, and snap it with pliers or something, and you have One Side. Do the same for the other side. The finished products are made of Male and Female, so you can connect them properly by plugging them into each other. It is an excellent product. However, if it is difficult to connect the wires, it is of course useful, but if you have a spacious place and have some room in length, I think it is best to put a solder on it.
The price is high and the cosmetics are not so good. But I think it's useful if you're in a hurry, a very beginner, or in a small space.
View detail
Frosted Material with high texture
I used this product to wiring up my Ninja250SL's sub-computer and USB. Honestly, you can use Curing Tape instead of this product, but this product is pre-cut, so it is easy to work with, and it looks overwhelmingly good, so it is a Recommendation! View detail
Installed in Motorcycle yard.
I installed it in the parking lot for my motorcycle in my small yard on the way home from touring. It is very sturdy so even if I ride up on it with my motorcycle it doesn't scare me! It also contributes to safety as it reflects the light and shines well! The double-sided tape on the back has good adhesive strength and does not come off! View detail
amon Crimp Terminal Comprehensive little kit
Decent quantity of crimps Good selection of terminals. Bought this to ensure correct terminal for repairs. . Very useful and ready for next repair.Great value kit with a good selection. Ideal for everyone's tool box and in a handy case too.came with the little box and very easy to find and storage.Nice concise good quality crimp set that is essential in anyone tool kit.Needed a choice of crimps and terminals for urgent wiring job on motorcycle .They are easy to crimp with the right tool! got 5sets box for very cheap price.I really like this set and worth the money. buy with the confident .you'll get the quality crimp terminal set for lowest price..Need to remind WEBIKE packaging and fast reliable service .WEBIKE PACKAGING IS TOP NOTCH and very well secure.The only place where you can confidently buy the spare parts you need at the lowest prices . If you choose EMS , Shipping chargers are very Fair enough very well organized online shop . webike shop is very AUTHENTIC . 5STAR SHOP. Thank you webike for the support.I'm looking forward to buy more stuff .I highly recommended View detail
The choice of Warm White and White issue colors is awesome!
I installed this product in my yard where I park my Motorcycle.
As you can see from the attached photo, the waterproof coking is firm and will not be soaked or crushed by a large rainfall.
It is also covered with a sturdy frame made of aluminum alloy and gold, so it will not be affected by riding up on a Large Motorcycle. (See the following table for more details. Weight capacity (About 3 tons) I thought it was a little expensive. I thought it was a little expensive, but the quality is very good, so it is acceptable. However, I am concerned about theft, so I think it would be better to install it on private property surrounded by an exterior wall or to install it with an anchor.
View detail
Durable!
I put one on the back of my car and the rest at the entrance to Garage. I scraped it on the ground once when I fell over, but it was strong and only got a few scratches! It's a great job and it's a Recommendation! View detail
A bit expensive but high quality! Be safe!
I have experienced an accident with a child, so I put this product on my Rear Bag for safety first!
I feel that the number of times I have been forced to close the distance between cars has decreased since I completed the application! Safety first! I will be an active Rider for life! This is a recommendation!
View detail
Recommended for Full Cowl Motorcycle!
Since my car is a Full Cowl, I have used many different Lining Peeled Off Tools to remove the cowl, but this product is very easy to use! I like that the resin used for the handle is different from the material used for the peeled-off part of the gold part! It is quite sturdy and I think it will last for a long time! View detail
My savior who mistakenly cut off CUB's Wiring
I bought it because I had mistakenly shibered CUB's RegulatorWiring.
The shape is exactly the same as the Coupler of the C50OEMRegulator.
However, please note that the OEM is like a double cord, so the attached terminals cannot be used.
View detail
If you're willing to rip it off, be careful.
Items convenient for products that also have a protector, so even if they are attached to protect scratches, they look like they are attached to improve visibility.
However, when peeled off, it left a mark and was a type of adhesive that was difficult to remove even with Seal peel, so I recommend using another double-sided tapeetc. if you are thinking of peeling it off.
View detail
Thick enough! Reflects well too!
We were looking for a reflective Sticker to improve safety. At first, we were looking for a reflective Sticker sold at a hundred-yen store.
I was dissatisfied with the adhesive strength and stuck this product on it.
I am satisfied with the results! When degreased properly, it does not peel off even if it rains, and it reflects the light of following cars perfectly.
It contributes to safety improvement! It is easy to apply, so it is a recommendation for everyone!
View detail
Light and affordable Large size
It is light, reasonably sized and inexpensive, so it is very useful. View detail
Changed to new Package. No stickiness!
I bought this product for a friend of mine because the Vinyl Tape I had been using at the 100 yen store was sticky, so I used it for the wiring process on my Motorcycle Navigation! It's sticky but not sticky! It's easy to cut with scissors!
This is a product I will continue to use for years to come!
View detail
Required for Coupler processing in Blinkeretc.
[How is it used?
I purchased this product because I wanted to use the same terminal as the OEMCoupler instead of the Bullet Type Terminal connection when attaching an external Blinker.
How was your experience with it?
It works fine. If it were a little more expensive, the feel would be better, but for this price range, I have no complaints.
The BlinkerCoupler for Kawasaki cars is essential, as it can only be fully crimped with Electric Works Pliers for fine wire.
[Points to note]
0.This is for 3sq or smaller only. Please be careful not to use it for other standard items as it may lead to wire breakage or damage to the tool.
How did it compare to other products?
It's neither too good nor too bad. It is inexpensive and easy to buy.
View detail
Amount of cotton, good.
The amount of cotton is appropriate and the texture is nice. about 2 liters of waste oil and it still seems to absorb it. View detail
Finally, it's time to go.
I purchased and installed a Push Type Switch to use as a switch for the power supply of the car navigation system, but the other day, when driving on a mountain pass with somewhat rough pavement, a malfunction occurred due to vibration, causing the power supply to turn off and on, and temporarily Navigation repeatedly started up and stopped functioning.
This symptom did not occur during normal city driving or on well-paved roads, even on mountain passes, so I think that the problem may have been caused by severe vibrations that exceeded the manufacturer's expectations. I think that the previous Push Type Switch may not be good at strong vibrations. I don't want to continue to use the switch in this situation and have navigation problems, so I decided to replace it with a toggle switch that I have and see how it goes.
I bought this toggle switch but never had a chance to use it, so it has been sitting in my inventory for a long time. I haven't tried it in a place where it would vibrate yet, so I don't know how it would work in a similar situation, but I like the way it looks, so I'm glad it works.
It is not waterproof, but since we basically don't ride in the rain and it is installed in a Cowl, it is probably Large sturdy. I have applied waterproof treatment to the terminal part.
View detail
Motorcycle Wiring Essentials
This is a must-have item when placing a Relay on the Seat and extending the wiring from under the tank, through the Engine sturdy, to the Handlebar on the Front. It protects the wiring from rain and heat and prevents unnecessary troubles. View detail
It was easy to use.
I purchased this product to use as a power switch for my car navigation system, and although it is not waterproof, it has performed its function with no problems caused by a little rain.
However, during a recent touring trip on a mountain pass with somewhat rough pavement, a malfunction occurred that appeared to be caused by vibration, resulting in a situation where the power was turned off and on, and Navigation temporarily stopped functioning after repeated startups.
Since this symptom did not occur during normal city driving or on roads with good pavement, even on mountain passes, we believe that this event was caused by severe vibration due to rough pavement. We believe that the problem is not a defect in this product, but rather that this type of switch is not good with severe vibrations, and that the cause of the problem this time was severe vibrations that exceeded the manufacturer's expectations.
I am thinking of replacing the navigation switch with a toggle switch that is in stock and see how it goes. I am thinking of replacing the Navigation switch with a Toggle switch that is in stock and see how it goes.
It's a shame because it felt good to use, but I think I will keep this Switch until I can find somewhere where I can use it.
View detail
It's safe to use
We have just purchased Male and Female at the same time, as the stock of Bullet Terminal was running low, in order to review the Wiring of the Motorcycle's retrofit electrical components.
I try to stockpile these frequently-used materials in large quantities because I don't like to be interrupted when I run out of materials during a job.
Some of the No Brand products were shoddy, but I can buy Emon products with confidence. There were no defective products this time either.
View detail