Reviews
It can be used without problems
Installed with no problems and flashes well.
The screw and nut of the mounting part are made of plastic, but I don't think it's a problem because it's not the part where the load is applied.
View detail
Easy Installation
I used it to install the company's Blinker.
I was able to install the Blinker with ease, but I thought it could be a little cheaper.
The installation itself went without a hitch.
View detail
Fits: KAWASAKI ZX6R, KAWASAKI ZX10R
It looks good!
[How is it used?
I wanted to make the Motorcycle look Black, so I just used the Stop-lamp.
Was the one you received as per Image?
Street Image
Was the installation difficult?
It took about 30 minutes.
How was your experience with it?
If you also use Blinker, you can Refreshing, but it won't pass inspection.
[Included Parts:were they on?
It came with a cheesy Relay.
[Was there anything that disappointed you?
I could sell it for a little less.
Other items that would be helpful
Request Maybe I should just use Stop-lamp and offer a cheaper version.
View detail
Used on Honda Grom
I thought I could pimp it out to a Grom, but I needed Conversion Harness.
I'm sure you can find it if you look for it at the same TST.
The replacement itself is easy, as you just remove and replace it.
View detail
Used on Honda Grom
I used it to put the TST LED Blinker on my Grom.
Simply connect to the LED Blinker and attach the Coupler.
View detail
![LED Front Blinker Easy Fitting [No Processing]](https://global.webike-cdn.net/uiu/impression/202110/21_1019039_61714350c6ab6.jpg)
Fits: HONDA CBR250R, HONDA CBR300R, HONDA CBR250R
If only it was a little more visible……
I bought this to reduce the protrusion as much as possible because the parts of the car body are generally easy to catch the Motorcycle Cover.
Exclusive? Because it is too dangerous to "Flasher as it is in the luminance of Position", Relay was processed by 2Rinkan though the Blinker relay of (Cancelation of Position function) I had it done.
Because it is a 300R conformity product of the North American Spec. originally, it seems that it is different from FOR JAPAN MODELMODEL.
According to Axxl, the distributor "I recommend ICRelay from POSH and KIJIMA. It seems
Since there is almost no protrusion from the vehicle body, the visibility from the front during the day is not flattering.
I think it is a good idea to choose CowlPaste Type.
View detail
very satisfied very very very
The light is quite bright.
The product is also of good quality and I am very satisfied.
It is very good when used together with TST fan-less products.
The TST product itself is very easy to use and feels like something delicately made.
very satisfied haha
Hahaha
haha
Hahaha ------------------------------------------------- --------- The light is quite bright.
The product is of good quality and I am very satisfied.
It is very good to use it together with the TST fenderless product.
The TST product itself is very easy to use and there is something delicate about it. The feeling of being made
very satisfied
View detail
very useful
I bought this to be able to work without touching the main wiring.
I'm glad I bought it haha Thanks to you, I did a good job.
It would have been nice if there was a color difference as well.
Well, it's not really a problem hahahahahahahahahahahahahahahahahahahahahaha
Ha ha ha ha ha ha ha
Ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha --------------- I bought it to be able to work without touching the main wiring
I bought it well haha Thanks to you, it worked well.
I would have liked to have provided a color difference like the original one
Well, it's not really a problem
View detail
honey belt
I like the Tst product I like the quality It meets the Korean license plate specifications I only need to widen the hole by 1mm The shipping on Webike is really fast, but it took a long time because it was a tst order product. View detail
Can be used with JC92 * Requires processing.
I decided that this was my only choice for front blinker.
Processing is required for installation.
The Position light will not light up. ＜If you modify the wiring, it will turn on.
When installing, it is possible to install if the original Rubber cover is cut off with Cutter.
Because it cannot be fixed with PlasticNut of the attachment, it is fixed with TNut M10x25x1.8mm.
TNut sells them at Home center.
I'm sure there are individual differences, but only our Right Side is damp and cloudy. (Lol)
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z125, KAWASAKI Z900, KAWASAKI ZX6R, KAWASAKI Z400, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI ZX10R
Not so convenient
The functions of the modular are good but programming is a bit inconvenient because you need to open up the cover. Should have provide a small hole for adjustment. View detail
Fits: KAWASAKI ZX6R, KAWASAKI ZX10R
Upgrading the look, and you can even choose how to light it up!
I chose the Smoked lens and it was the right choice.
The installation is not so difficult because it is Couplet-on, but it takes some time because you have to remove the Tail cowl and loosen the License Plate Bracket.
This product has a Stop-lamp function and a Blinker function that allows you to select several different ways to blink!
I did not use the Blinker function because my vehicle uses KIJIMA Nano Blinker for Fender Eliminator.
The flashing method is
Braking, first Electronic flash flashing & rarr; always on
Braking, leaving the electronic flash flashing
Braking, normal lighting
You can switch between them with the switch on the back of the TailBody.
I haven't checked how the Blinker blinks as I don't have it connected.
View detail
Refreshing around Tail
It is 5 stars without complaint.
Unlike other Fender Eliminators, this one is designed to be used with Fender's Integrate Tail, so it is very compact without the Blinker attachment.
However, Integrate Tail is illegal in Japan, so I combined it with LicenseNumberBlinker.
Because the hole of the wiring passage is vacant in Back plateCenter, the wiring of Blinker and License Plate Light can be passed through Beauty.
View detail
Fits: SUZUKI GSX-S1000, KAWASAKI KLX300, KAWASAKI KLX300SM, KAWASAKI Ninja 250R, KAWASAKI Ninja 300, KAWASAKI Ninja 400, KAWASAKI Z300, KAWASAKI Z400, KAWASAKI ZX6R, SUZUKI GSX-R1000, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000F, HONDA Grom
Flashing speed can be easily adjusted
I don't have the Instruction Manual, so I don't know the pin assignment, but the terminal on the long side is Battery and the short side is Blinker connection. remove the Cap and turn the semi-fixed resistor on the Print board to Right to decelerate and Left to accelerate.
KITACO Connector set (item number) ： (0900-755-02080) and Suspension for Honda OEM Relay (38306-KK4-000) will fit.
View detail
Too big NORMAL to Sharp
Installed on z125 pro
A little modification is required for installation.
However, the Blinker display in the Panel doesn't blink after I put it on, so I'm thinking about what to do.
View detail
no problem
I bought this with Conversion Harness3-2.
Installation is easy, just remove the Headlight, remove the OEM Blinker, and attach the Conversion Harness to the TST Blinker and reassemble as before. At this time, it is recommended to install a Blinker relay that is compatible with the LED Blinker so you don't have to do anything annoying like attaching a resistor.
Also, if you buy this Blinker at other NetShop, it will be over 5000 yen, so it is better to buy it here.
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI Z1000 (water-cooled), HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR1000RR, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-09, YAMAHA MT-07, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Z750 (water-cooled), HONDA RC51 All, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA FZ6R, YAMAHA MT-09, YAMAHA MT-07
crf250l
crf250l 2014 After installing the led winka, it was difficult to work, but I found this product. It worked very well with the led front and rear winka. I am very satisfied. Very easy to install. The blinking speed control function was also very good. Delivery was also accurate and fast! ---------------------------------------------- crf250l 2014 After the toys were not equipped led wingka not work, but found the product It works very well with the back of the front led wingka Very satisfied Very easy to mount Adjustable flashing speed function is very good Shipping also has accurate and fast! Powered by Google Translator View detail
![LED Front Blinker Easy fitting[No processing]](https://global.webike-cdn.net/photo/impression/1b/1b9fff9f370d8f76ada33615e6ef3b58L.jpg)
Fits: HONDA CBR300R, HONDA CBR250R, HONDA CBR250R
Cosy, good looking, EMark certified product!
I bought it in order to replace the Front Blinker of '14 MC41 CBR250R with the LED Blinker of the embedded type.
Because the thing of the thing made of TST had the official introduction animation etc. on the Net and seemed to be the most decent product, the thing of the thing made of TST though the thing made of Hot bodies and the Chinese product were considered.
There are two types of fitment, easy fitting and full fitment.
Because Cowl is White, I chose Clear Lens which is not conspicuous when wearing it.
Big surprise when I saw the package that arrived, just a ZipBag with the product and mounting parts.
There is no Instruction Manual.
Well, it's inexpensive, so I guess they're cutting costs.
The quality of the product itself is comparable to other domestic parts. The Bullet Type Terminal is already installed, and the waterproof coking is done at the wiring exit. The price is very reasonable and the quality is excellent.
Also, I didn't have any explanation for this, so I didn't know it until I saw the product. This is a happy miscalculation.
Easy fitting, just replace the OEM Blinker. (It doesn't ExactlyFit, so positioning is necessary) However, the ear part of PlasticNut interferes with the inside of Cowl, and it cannot be installed.
No modification" means that the product can not be installed without modification;
So, it is necessary to shave the fat part of the ear of the image to a small size.
The fit is slightly gaping when you look at it up close, but considering the Cowl process, it's acceptable.
The brightness is honestly more than I expected and the visibility from the side of the vehicle is good.
Visibility from the front is not good because it is an embedded type.
By the way, even if I used it together with the Blinker positionRelay made by POSH which makes it possible to correspond to LED Blinker while keeping the Blinker position function of OEM alive, I could use the Blinker operation and the dimming operation at the time of Position without a problem.
For these reasons, we recommend the Blinker to those who want to embed the Blinker and refreshing the car body, because the quality is good for the price.
If you want to improve visibility purely, it is better to look for Bar type instead of embedded type.
View detail
Fits: KAWASAKI Z400, KAWASAKI Ninja400
The most beautiful and perfect ninja500 taillight!
This taillight is perfectly adapted to the Kawasaki ninja400, which is much better than the original taillight, and there are many lighting methods, the kind that can be programmed by computer, the lighting effect is full of texture, and the overall grade of the car has been improved. No need There is no need to break the board even if the line is broken, it can be used directly by plugging in, and it can be installed by looking at the manual! Good stuff, buy it! ---------------------------------------------- The taillights perfect fit Kawasaki ninja400, good-looking than the original tail lights and more, and a variety of lighting, it can be kind of computer programming, lighting effects full of texture, the overall grade cars have increased, no broken line does not need to break the board, direct plug can be used, with a straight line, read the instructions themselves can be installed! Good stuff, buy it! Powered by Google Translator View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z125, KAWASAKI Z900, KAWASAKI ZX6R, KAWASAKI Z400, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI ZX10R
Easy installation
Installation is very easy.
Both the pattern and rate of the light emission can be easily adjusted.
It is a very self-satisfied part of MotorcycleParts.
View detail