Reviews
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB 50, HONDA BENLY50S, HONDA SUPER CUB70, HONDA BENLY50CD50, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA CL50
Almost satisfied
I changed FrontSprocket from 15T to 16T, but since it was still a low GEAR ditch, I changed Rear from 39 to 37.. It is very smooth for running, and the range of 1st and 2nd gear has expanded to a great extent. If it is a steep slope, the number of revolutions will decrease if you do not pull it with 1st speed 2nd speed, but in ordinary driving it will not be a problem first. I tried Tandem but never felt power shortage. When it was NORMAL, I was able to start 2nd gear, but it is hard for this combination. View detail
It is likely to last long
I installed it in SEA BASSEPO. It became easy to get on very well.
I should have installed more sooner
. The painting of Black is also on the car body and the appearance has improved
View detail
Fits: HONDA MONKEY BAJA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY BAJA, HONDA GORILLA
Satisfied with Cost performance
Even though it is a trust Brand, Cost performance is high so I purchase it every time I change Size.
If possible, I would like a Variation from this price.
View detail
D-TRACKER125Off-roadSpec. To
47T originally seems to be Klx125, but if you drag a truck to a lock tie, in combination with this, the secondary speed reduction ratio becomes almost the same as NORMAL, and ON / Balance of OFF is easy to run well. If you raise it any further, the movement of public roads is painful. View detail
Fits: HONDA NS-1, HONDA APE 100 TypeD, HONDA NSR50, HONDA NSF100, HONDA XR100MOTARD, HONDA NSR mini, HONDA NS50F, HONDA NS50R, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA NSR80
Exchange from OEM
I never exchanged Chain or Sprocket since I purchased Motorcycle
I exchanged all at once.
Despite saying that OEMSprocket was not so degraded both before and after
Because Chain saw wearing at a marginal Level
In any case change it all.
It was my first time in everything, so I had trouble removing Tire
It was fairly Large strange that trial and error with fixed Torque of Axle Shaft.
I wonder if I get used to it a bit better?
It may be due to mind, but Torque is improving I feel like w (probably due to mind
View detail
Fits: HONDA Ape 100, HONDA GIORCUB, HONDA JAZZ, HONDA CHALY 70, HONDA CHALY 50, HONDA APE 50, HONDA XR80, HONDA XL80, HONDA XL50, HONDA XE75, HONDA XE50, HONDA R&P, HONDA CB50, HONDA MAGNA50, HONDA MONKEY RT, HONDA MOTRA, HONDA Nauty Dax, HONDA DAX70, HONDA DAX, HONDA MONKEY R
Ct70 kitaco 31 tooth rear sprocket review
The Honda CT 70/Honda Dax sprocket arrived quickly and is a quality product. I received a 31T, which is the correct product I purchased from Web!ke. This company is legit and their website is user friendly. I have ordered from them before and had no issues with payment or correct quality product delivery. I would recommend Web!ke to anyone looking for hard to find parts in USA. View detail
This item is recommended
Although it has not yet been installed yet, it is quite somewhat somewhat due to stocks, as there are few Universal parts.
It would be even more appreciated if you could select a few more.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA BENLY50CD90, HONDA SUPER CUB70, HONDA BENLY50CD50, HONDA BENLY50S, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CL50
Cospa has no complaints.
It is an old Motorcycle made in 1987, but it was saved by partly inventory and delivered on the day and incredible quick response. As for parts, there is no problem with KITACO quality. View detail
Kitaco z125 rear 27 tooth sprocket from webike review.
This is my first time using webike as a resource for my kawasaki z125 motorcycle parts, I was having trouble finding good quality parts anywhere for the z125 here in the united states of america, I am happy to say that I found the webike website the site is very well laid out and easy to navigate they have more bike parts then i could hope to find anwhere else, and in no time i found exactly what i was looking for a kitaco 27 tooth rear sprocket very high quality part for the Z, which is lower then anyone else offers! Webike is great! And I will be back again. Thank you so much webike you guys are awasome! View detail
Satisfied
Fee Ring got better. Cost performance is also good, I am satisfied. Regarding durability, it has not been evaluated since it is just installed. View detail
Fits: HONDA MONKEY R, HONDA XE50, HONDA XR80, HONDA APE 100, HONDA XE75, HONDA JAZZ, HONDA DAX70, HONDA DAX, HONDA MOTRA, HONDA Nauty Dax, HONDA GIORCUB, HONDA CHALY 50, HONDA APE 50, HONDA MONKEY RT, HONDA XL50, HONDA XL80, HONDA CHALY 70, HONDA CB50, HONDA R&P, HONDA MAGNA50
The installation is slightly difficult degree with no problem in performance.
Friend's APE 50 (Carburetor Vehicles) It attached to.
In the case of APE 50, it is necessary to have Snap Ring Fliers corresponding to shaft diameter of 55 mm or more, so it is difficult to install without this tool.
After installation, the trial run in the new article Chain is used without any problem.
It seems enough performance other than the part that needs some accustoming to installation.
It is enough if the part precision for town riding is enough.
View detail
Fits: HONDA MONKEY BAJA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY BAJA, HONDA GORILLA
Battle at the price
I used it for MONKEY because it made it Engine Displacement Volume 75cc so I replaced it considering the maximum speed and the number of revolutions without GEAR ratio matching NORMAL.In installation, because Center Stand is not in MONKEY, it is placed on a jacket for two wheels I think that it can be built in about 30 minutes, it will be safe to finish the work as long as you tighten the Torque.The ride feeling came to be able to run together with the flow of the car on the main road without difficulty. View detail
Fits: HONDA APE 100 TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA NSR80
I am satisfied.
Balance of price and quality is good, I used the same KITACO 28 daughters about 5 years ago, but since the paint was solid and there was never rusting and I did not get rusted, so this time I also bought KITACO.
I think extra parts are also carved out and I think that there is no BALI and it is a beautiful finish.
Because 28 people were somehow expensive why, I tried it for 29 cheap price this time.
Note that this Sprocket is for Type D, so it can not be used for APE of Iron Wheel.
View detail
Fits: YAMAHA RZ50, YAMAHA RZ50, YAMAHA TZM50, YAMAHA YB50, YAMAHA YB-1, YAMAHA YB-1 FOUR, YAMAHA TT-R50E, YAMAHA RX50
It was Large fun to widen the hole w
I bought this product in order to make TZr 50 3 TU 420
It was Large strange to spread the mounting hole from M8 to M10 ...
Goriguri with Hand reamer ...
I do not want to do it again ...
View detail
Fits: HONDA XR50 Motard, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1
I want to say a few words about this sprocket. It looks and works smart. You will feel the quality of Kitacko sprocket. It is probably the best one I have ever used!
I want to say a few words about this sprocket. It looks and works smart. You will feel the quality of Kitacko sprocket. It is probably the best one I have ever used! View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
Since the acceleration on the ascent is bad, change the T number
Until now I was wearing the company's 26T, accelerating uphill is bad, so increase 1T to 27T.
I ran about 7,000 kilometers at 26 T, but I removed the tooth condition (Degree of decrease) I was surprised (See photo).
Before changing the T number, Driven - Sprocket was way too long for replacement.
Chain was also growing so I dropped Piece and wore 27T.
Even if Top speed got sacrificed, the hill climbing ability improved (Although it is not dramatic).
It is noteworthy that you can enjoy the difference in effect with cheap parts.
In the future, I will pay attention to the growth of Chain and the tooth sharpness.
View detail
Fits: HONDA XR50 Motard, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1
4.8
I purchased it because I exchange Chain.
Rear is NORMAL 41, but it was lower than the highest speed to 39 dollars.
The price is also cheap and the durability is no problem So it is used since it was OK
View detail
Fits: HONDA XR50 Motard, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1
High durability
Replacement for OEM at NS50F. I used it for. There was also AluminumSprocket,
It is considerably expensive and Aluminum made by KITACO of iron because it is concerned about wear.
accuracy - Both texture and good, there is no cheaper than I thought. Black color is plain.
Thought though it is surprisingly noticeable when combined with Silver chain.
Durability was comparable to OEM.
It is a Sprocket with no negatives even if Black color is allowed.. I highly recommend it..
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
I think it's good.
There is no particular complaint.
I wish I had Silver if possible.
The price is also cheap, so it seems that you can prepare several sheets, so it was good.
We will also purchase other Sprocket.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
I think that it is good as Cost performance
Although it can be attached to MONKEY of AB 27, since it interferes with Tank in 4 L MONKEY or Z 50 Z MONKEY, it is necessary to set the carburetor angle Spaceretc. You must use.
The texture differs between the Float room and the upper part. Regarding the upper part, there are things like Small File's scratch, but there is not much to worry about, but a little disappointing about the Float room.
I used it for AB27-88cc MONKEY but it is stable so I think that it is good for Cost performance.
KEIHIN's replacement from PC 20, but there is no problem.
View detail