Reviews
Flailing Torque is light
It is a 1/2 size Ratchet Handlebar
There's not much to do in the maintenance of a Motorcycle, but
There are occasional opportunities to loosen up the Axle and so on
It is convenient to have
Ko-Ken's Ratchet is good but the flailing Torque is light
A small number of GEAR is a drawback
There are a lot of situations where Ratchet can swing Large in 1/2 Size
You don't have to be a mainstream GEAR to use it these days
It is robust enough that it is not likely to be broken even if you hang a large torque on it because of the small number of GEAR measure
And Ko-Ken's unique Knurl process with a slippery handle that was cut into a groove seems to be a favorite But it's so great that I think it's the only one that fits
View detail
Beware of those who replace the Plug with TL125
TL125IHATOVO or later MODEL's, purchase to Plugfor Replacement I did
However, as a general comment, the Plug could not be replaced
View detail
cooking Torx
This socket is very useful to open the torx nut and not to damage the nut head. It works well with ordinary vehicles. I would like to use it View detail
Easy to use
As expected it is easy to use koken.
Balance with price is also good, it is a quality that can be relieved.
Because Head does not become obstructive and disturbing like Ratchet Handlebar,
Spinner handle is useful for Quick work.
View detail
I think that it is very useful.
Until now why did not you buy? Why was it Magnet type Socket? I was wondering, but after all Ko - ken 's Nut grip, price - I bought this Nut grip for ease of use and good things. Bolt - If you are in trouble by dropping Nut, is not it okay to have it owned.
View detail
Bolt Prevents accidents caused by falling.
SK11 as Socket with similar performance "Bolt catchSocket" And Koken's "Nut grip" , And FPC "Catching Socket" There are, but since we actually purchased other than SK 11, this time Koken's "Nut grip" I would like to imprint.
Clearly, as none are designed under similar Concepts there is no difference in the performance in terms of performance. Perhaps the cheapest SK11 also has no problem performance, but the difference will be quality and durability. As long as you are not a mechanic at PRO, try SK11 and if you like it you think that it is better to buy famous brand items.
Unlike other company Manufacturer, only Nut grip has a satin finish on the whole surface. Unlike Plating, it is difficult to slip because there are delicate irregularities, it seems to be the result of considering ease of use as a tool rather than ease of cleaning.
Also, only Nut grip 6. 3sqSize is available, making it ideal as a motorized tool for Motorcycle. This prevents Trouble, which makes it impossible to return home by losing Bolt during repair at the destination.
What I just noticed was Design wound with Spring similar to SK11. Whereas TONE and FPC did not think that their appearance was so beautiful, I personally adopted Board Spring 's design rather than Board Spring.
However, personal recommendation is made by FPC. The reason is that none of SK 11, Koken, TONE has the property that it is difficult to remove NutSingle Body from Socket, whereas FPC releases the Tension that sprung on Ball by spinning a hemispherical depression It is because it allows you to retrieve Nut easily. It is unexpected that Sturess can not be taken out and it is necessary to actually prepare Bolt for Nut retrieval.
Although it is a personal opinion to the last, if ranking the performance and quality as Socket (1) Koken (2) TONE (3) FPC (4) SK 11, and focusing on the Grip mechanism (1) FPC (2) (3) Is koken - Either TONE (4) SK 11 and Cost performance as Sunday mechanic is (1) SK11 (2) (3) (4) Is Koken - TONE - It is the impression that it said either one of FPC.
There are lots of work in narrow places, so if you drop down Bolt it will become an Large canon in such places that you can say that it is indispensable for this type of Socket surprisingly many options, please try looking for quality and price.
View detail
Plug exchange
Failure to change Plug after a long absence is not permitted, we purchased a socket of highly reliable tool Manufacturer.
There is no backlash after inserting into the Plug so you can rest assured Torque. Moreover, since it was able to hold the Plug moderately, since it never dropped out when pulling out from the plug hole, it is a Socket that can be used quite nice feeling.
View detail
There seems to be no intersection standard for Plug insulators
I could not use it as a result.
The following 4 kinds of Plugs tried.
NGK CR8EH-9
NGK BKR7EIX-11PS
DENSO IK22G
ROVER NLP100290
This Plug socket holds the upper part of the Plug by Rubber with 3 step grooves.
When it gets stuck strongly, Extension and Spinner handleetc. Square will come out, and only the plug socket will remain on the Engine, now it is.
Since there is no choice, I reattached the tool and loosened the new Plug that I made.
I contacted Manufacturer and found that DOHCetc. Ideal for deep engine of Plug hole Model number 3300C. 180-16 / 3300C. Recommended for 250-16.
And it was that the Socket would remain.
There was no intersection standard in the guard part of Plug, it was explanation that there are individual differences depending on production lot and Manufacturer.
Perhaps it depends on the creation method, it can not maintain precision like machining.
In addition, I sent it to Manufacturer for confirmation, but the actual thing was confirmed, but the verification result that both Socket's dimensions and Rubber's material are within the company's standards, that it will not reflect on this product in this case is.
The point is that even if some people say that they can be used without problems, that happened to be a plug that suits them.
I thought that application would be useful if it was a Socket tool but it was a failure.
Personally those of the BALLarge bridge industry (Compared with Emon, decomposition Maintenance of Ball joint part can be done, with Grip Bar attached) We recommend special tools on board or on board.
View detail
It is a high class, it is a tool of one life
It costs quite good price, but the tool of koken is solidly made
I am a Socket related tool 3 / 8Inch(9. 5 mm) is also 1 / 2-inches(12. 7 mm) Size is also using Koken made
I would like to use good things when thinking about Bolt class rather than using cheap tools
As BoltHead licks and replacement work occurs, it takes extra effort and gold, so maybe it is an upfront investment considering that
Also, it seems that you can use it long unless you use poorly
If there is one tool, it is not like replacing the same thing many times, I think that it is good to arrange it with good things and use it for the rest of my life
View detail
Is it the product which specialized in the Motorcycle? If it devises, it will also become a Spinner Handle small also to a Driver.However, the Driver is easier-to-use and power does not enter rather than a Spinner Handle.Since it is compact, is it an
Is it the product which specialized in the Motorcycle?
If it devises, it will also become a Spinner Handle small also to a Driver.However, the Driver is easier-to-use and power does not enter rather than a Spinner Handle.Since it is compact, is it an original manner of use which is put in as an urgent in-vehicle tool?A Recommendation has both at a disagreeable person.
View detail
It is a Spinner Handle of 1/2-inch angle corresponding to the place used by high torque rather than 3/8-inch angle which is a general Socket size as a tool of a motorcycle. -- individual -- good -- everybody -- although it is a product by Cau Ke
It is a Spinner Handle of
1/2-inch angle corresponding to the place used by high torque rather than
3/8-inch angle which is a general Socket size as a tool of a motorcycle. -- individual -- good -- everybody -- although it is a product by Cau Ken, it is an agreeable impression which the Socket-joint portion at the tip of
moves with a Snap.although the photograph is in the state equipped with the Socket for Bolts with a big width across flat used for a car body --
-- it turns also around the Bolt which adhered to firmly snappily.Only by
, however this, if work is impossible and a 1/2-inch angle Socket is not newly purchased, it is die length as seen with the
photograph, and will be a literal useless thing.
View detail
quality which can trust made in JAPAN! the Mechanic of the Europe is charmed -- -- it is a Socket of Cau Ken who makes with quality reliable, so that it is said that all the Sockets that were in a certain tool store were bought up, comes out, and
quality which can trust made in JAPAN! the Mechanic of the
Europe is charmed --
-- it is a Socket of Cau Ken who makes with quality reliable, so that it is said that all the Sockets that were in a certain tool store were bought up, comes out, and can pride himself in the world!
Cau Ken with a FZX250 ZEAL.
Although there is also a Socket which has been small done lightly just like the Snap on to say,
It is a Nut grip socket that it is a Recommendation especially at Motorcycle maintenance!
mechanism in which a Nut is not held and dropped as the name suggests is structure which the Ball inside the Socket in a picture is holding exquisitely!
This grip degree is exquisite and is not too loose too strongly.
An effect is demonstrated when working in the posture on which it is easy to drop some Bolts when coming out and removing the
Oil drain bolt and the exterior well exactly! Structure of the
Socket itself is also very good! If the
fault is got,
If compared with a FZX250 ZEAL, it will become somewhat large, but compared with the Socket of
other company, it is practically equal in a size!
As for something, when removing a thin Nut, it is troublesome for a Nut to be held by the Socket and to remove a Nut from a Socket.
Although there is a fault for a while, since it is preeminently easier-to-use than an ordinary Socket, and a price is also handy if you buy it by a Set, it is one article of a Recommendation!
View detail
[Webike Monitor] By a in-vehicle tool, since 2 and having are inconvenient, a Driver is corresponded with a Socket. The Handle which can use , therefore a Socket was purchased. Since it can use even if it bends, even when it is straigh
[Webike Monitor] By a
in-vehicle tool, since 2 and having are inconvenient, a Driver is corresponded with a Socket.
The Handle which can use
, therefore a Socket was purchased.
Since it can use even if it bends, even when it is straight, I think that user-friendliness is good as an in-vehicle tool.
When you buy it as a tool for daily use, in order that there may be no Ratchet function, it seems that it is inconvenient.
View detail
even if there is also die length moderately and it seldom puts in power, it is closed firmly -- -- if the place which is used for a long time is good -- ♪
even if there is also die length moderately and it seldom puts in power, it is closed firmly -- -- if the place which is used for a long time is good -- ♪ View detail
Structure is solid although it is an unaffected tool. Since it is fixed lightly every 90 degrees, the portion which attaches the Socket has good user-friendliness, and if a stick is inserted in the hole of the portion of a handle, it can be
Structure is solid although it is an unaffected tool.
Since it is fixed lightly every 90 degrees, the portion which attaches the
Socket has good
user-friendliness, and if a stick is inserted in the hole of the portion of a handle, it can be used also as a 600-mm long T character
Handle.
Probably,
special character exertion is a point which can carry out
of loosening the Screw which has become tight with high torque taking advantage of die length of 600 mm.
Since a Torque starts too much conversely as for bolting, careful cautions may be necessity.
View detail
It uses for removing the Rear-wheel Nut of Ducati748. The power applied although about 300-mm L character Handle was used before is in a completely different class. the accuracy of each part is high and a Head and a Socket suit -- Locke -- and dust is c
It uses for removing the Rear-wheel Nut of Ducati748.
The power applied although about 300-mm L character Handle was used before is in a completely different class.
the accuracy of each part is high and a Head and a Socket suit -- Locke -- and dust is carried out.
Moreover, since the height in the state where the Head was pushed down as compared with other Manufacturers is stopped, power can be applied correctly.
Although
one chose the MODEL of the Knurl, there are a resin grip and other Mirrors.
Mr. Cau Ken who prepares a choice by people since it is various which is easy-to-use is true.
Even if it should damage a
head part, a repair Parts is obtained at a low price.
He was actually helped by Colet.
But it seems that a Torque or kicking are wrong and it hardly breaks in anticipated use until it breaks.
Although the frequency to be used may be low, by a good tool, the work which requires big power is done rightly and cooked.
View detail
Although which goods are chosen apparently, it is the same goods, but the point considered that this product of Ko-Ken gets across to a Socket exactly, without power escaping since the Shaft has an ellipse instead of a round head thinks that it wo
Although which goods are chosen apparently, it is the same goods, but the point considered that this product of
Ko-Ken gets across to a Socket exactly, without
power escaping since the Shaft has an ellipse instead of a round head thinks that it won compared with the product of
other company.
View detail
It is Thought by the same fixed method as the Nut grip socket of Ko-Ken that a Bit is fixed, and I think that it is very easy-to-use and convenient.
It is
Thought by the same fixed method as the Nut grip socket of Ko-Ken that a Bit is fixed, and I think that it is very easy-to-use and convenient.
View detail
[ -- the Webike Monitor ] -- since a 5-mm Hex Screw is used for the Motorcycle by which I have ridden in large quantities -- purchase. Although the Hex of L shape was also owned, after purchasing here, there are also no necessities, such as a ha
[ -- the Webike Monitor ]
-- since a 5-mm Hex Screw is used for the Motorcycle by which I have ridden in large quantities -- purchase.
Although the Hex of
L shape was also owned, after purchasing here, there are also no necessities, such as a have substitute, and it came to be able to do work more efficiently.
Although it may seem that it is change of mere a few, it feels so that it can fix quite comfortably depending on a number.
Like my Motorcycle, a Hex Screw is a Recommendation especially in people with the Motorcycle currently used mostly.
View detail
[ -- the Webike Monitor ] -- those [ one ] who own the old Motorcycle think that they will be useful for an emergency if had. Since it will not rotate if the power to strike is weak, please prepare without forgetting a larger Hammer.
[ -- the Webike Monitor ]
-- those [ one ] who own the old Motorcycle think that they will be useful for an emergency if had.
Since it will not rotate if the power to strike is weak, please prepare without forgetting a larger Hammer.
View detail