Reviews
Fits: YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z
OEM Parts
The Mirror screws on my Motorcycle are special and I could not find any that fit at the Motorcycle shop near my house, so I ended up installing OEM Mirror screws. The OEM Mirror is cooler and easier to install. And webike's prices are better than YSP's and more affordable. View detail
Fits: HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP
To new.
I purchased this product to replace the old one that was installed with a new one. It is just packing, but I purchased the same HondaOEM Product as the one I replaced.
I wish it was cheaper.
View detail
Fits: SUZUKI Boulevard S50 (VS800), SUZUKI Boulevard S50 (VS800), SUZUKI Boulevard S50 (VS800), SUZUKI Boulevard S50 (VS800), SUZUKI Boulevard S50 (VS800GL), SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650AL3, SUZUKI DL650AL3, SUZUKI DL650XA, SUZUKI DL650XA
These rust real bad
I ordered lots of hardware nuts & bolts from WeBike. The rest are all great. But this part number screws all rusted up really bad within just a couple of months. And I always park my motorcycle in my garage and it has never been rained on. View detail
Fits: HONDA GROM125, HONDA GROM125, HONDA GROM125
Replacement Rear Right Cowl for the Grom
About quality and texture: I am happy with the quality of the rear right cowl from Honda. Injection moulded from plastic in a Pearl Valentine Red Type 1 paint finish. About the feeling of use: The genuine Honda replacement part fitted perfectly with the mating rear center cowl upon install and the pearl paint finish is quite impressive. Products to buy together: Some replacement Honda fasteners would also be desirable to purchase along side the rear right cowl as they deteriorate over time and need freshening up. Difficulty of installation: The process to install takes about half an hour, removal of the seat is required to access the mounting fasteners for all three rear cowls, once removed slip off the the rear cowl as an assembly and then swap out the rear right cowl before re-assembly. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a genuine Honda part that has a perfect fit and finish wiith it's mating Honda parts at a reasonable price as compared to aftermarket body panels that usually have difficulties in mounting without some modification. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: The Webike OEM parts section will be most helpful for sourcing other parts needed for your repairs. View detail
Fits: HONDA GROM125, HONDA GROM125, HONDA GROM125
Replacement Rear Left Cowl for the Grom
About quality and texture: I am happy with the quality of the rear left cowl from Honda. Injection moulded from plastic in a Pearl Valentine Red Type 1 paint finish. About the feeling of use: The genuine Honda replacement part fitted perfectly with the mating rear center cowl upon install and the pearl paint finish is quite impressive. Products to buy together: Some replacement Honda fasteners would also be desirable to purchase along side the rear left cowl as they deteriorate over time and need freshening up. Difficulty of installation: The process to install takes about half an hour, removal of the seat is required to access the mounting fasteners for all three rear cowls, once removed slip off the the rear cowl as an assembly and then swap out the rear left cowl before re-assembly. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a genuine Honda part that has a perfect fit and finish wiith it's mating Honda parts at a reasonable price as compared to aftermarket body panels that usually have difficulties in mounting without some modification. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: The Webike OEM parts section will be most helpful for sourcing other parts needed for your repairs. View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA MT10 (MT10MB), YAMAHA MT10 (MT10MCB), YAMAHA MT10 (MT10MCL), YAMAHA MT10 (MT10ML)
Headlight Cover Yamaha MT10
After a lot of research and you tube videos I decided it was time to change my headlight cover. The videos I saw showed it was not too bad to access. So I pulled the pin and purchased one for my bike. The old one had a couple of scratches and looked a little worn. Finding the correct part was a paint from the Yamaha parts site due to colour available. Once I had this, I simply searched Webike website and the correct one came up. Ordering was super easy, the cost was very favourable indeed. Shipping was also pretty good for the service used, Fedex. Everything was packaged very well, no possiblilty of any damage with the amount of packing around the parts. Upon arrival, which took a few days, the part was perfect. Took a while to remove the old one but after that was done, it was easily fitted within an hour altogether. Everything was perfect, all the lugs were in the correct place with no need for adjustments. It now looks like my old bike has new life. Very pleased with the outcome and the service provided from Webike. Brilliant View detail
Fits: HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125
Replacement Rear Center Cowl for the Grom
About quality and texture: I am happy with the quality of the rear center cowl from Honda. Made from plastic with a mat black finish. About the feeling of use: The genuine Honda replacement part fitted perfectly with the mating rear left and right cowls upon install and the surface finish flawless. Products to buy together: Some replacement Honda fasteners would also be desirable to purchase along side the rear center cowl as they deteriorate over time and need freshening up. Difficulty of installation: The process to install takes about half an hour, removal of the seat is required to access the mounting fasteners for all three rear cowls, once removed slip off the the rear cowl as an assembly and then swap out the rear center cowl before re-assembly. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a genuine Honda part that has a perfect fit and finish wiith it's mating Honda parts at a low price as compared to aftermarket body panels that usually have difficulties in mounting without some modification. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: The Webike OEM parts section will be most helpful for sourcing other parts needed for your repairs. View detail
Top Quality Yamaha Part
For Yamaha Mt10 as a change of colour to my bike. Decided to go for the glittery effect panel. Easy to find, just check your local Yamaha part centre and note the part umber. Very reasonable price and you know it is a genuine part and not some cheap imitation. Shipping was very good for the service provided. Arrived quickly. The packaging did exactly as it should do with no damage and plenty of padding to protect. The paint finish is impeccable, very well painted and adds a nice sparkle when the sun hits it. Super easay to fit, just remove your old panel which has 2 small bolts and replace with new panel. Will be back for other parts for all my bike when needed. Thank you again Webike, very very well done View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA MT10 (MT10ML), YAMAHA MT10 (MT10MCL), YAMAHA MT10 (MT10MCB), YAMAHA MT10 (MT10MB)
Genuine Part
Replacement for my older part which was looking a little tatty. Super easy to find the correct part in the correct colour. Speedy shipping, very well packaged. Upon arrival, no damage at all, everything in pne piece. Well done for that Webike. The feel of the part was excellent, no sharp areas to cut your hands on. Fitted in no time. Brilliant View detail
Side Tank Panel
Needed a change to the colour of my bike so decided to go for something completely different that orignal colour. This was an option and thought it would add an extra pizzazz. Easy to find, super easy to fit. Shipping was fast and very very very well packed. As you would expect as this is a glossy painted panel. No worries here, all looks fantastic View detail
Fits: YAMAHA MT10 (MT10MB), YAMAHA MT10 (MT10MCB), YAMAHA MT10 (MT10MCL), YAMAHA MT10 (MT10ML)
Spare Yamaha Part
I wanted to spruce up my bike a little and the old parts were looking a little tired. Went for this item and couldn't be happier. Delivery was fast, packed very well. All ok from me. Very simple to fit once everything was accessible. Very happy with outcome. Thanks a lot View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA MT10 (MT10MB), YAMAHA MT10 (MT10MCB), YAMAHA MT10 (MT10MCL), YAMAHA MT10 (MT10ML)
Genuine Yamaha
This is the opposite side I purchased to spruce up my tired looking parts. Speedy delivery, very well packaged. At my door in under a week. Everything is easy to do on here, find your part, place order and wait for delivery. Steady away with fitting as these are a little fiddly to get at. Looks brilliant when on. Great job View detail
Fits: YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1
Buy cheap, buy twice, stick to Genuine Yamaha Parts
As in my other review for the nut springs, you can buy cheap alternatives but why save a few pannies on cheap when you can easily buy the genuine Yamaha ones and KNOW they will fit perfect every time. Used as I replaced a few panels and did not want to use old clips. Super easy to fit, they just push onto the lugs on the plastics. Outer screws that are used simply fly in, no niggling around for where the threads are. Yes, they are clips but buy cheap, buy twice.. the end. Shipping was fast, packaging, perfect. Arrived no problem. Well done Webike once again for an awesome service. View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA MT10 (MT10ML), YAMAHA MT10 (MT10MCL), YAMAHA MT10 (MT10MCB), YAMAHA MT10 (MT10MB)
Genuine Yamaha all the way
I suppose you could make these yourself if you had the materials but they are never going to fit as they should or look as finished. Decided to swap out older parts and replace with these new ones. Finish is perfect, paint was perfect. Makes the bike look brand new. Price was far better than I could get in the UK. Packaged well, shipping time was good. No problems here. Thank you Web!ke View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA MT10 (MT10ML), YAMAHA MT10 (MT10MCL), YAMAHA MT10 (MT10MCB), YAMAHA MT10 (MT10MB)
Genuine Yamaha part
Needed to finish f the whole front fairing project as my front end was looking a little tired. Genuine Yamaha parts for me for this job. Easy to fit, finish was perfect just as you would expect. arrived very fast, packed very well. Great service throughout. Thank you Webike View detail
Fits: YAMAHA MT10 (MT10MB), YAMAHA MT10 (MT10MCB), YAMAHA MT10 (MT10MCL), YAMAHA MT10 (MT10ML)
Genuine Yamaha
The final piece in my front fairing replacement. Genuine Yamaha part for this, non of the cheap crap you can buy. Substandard is not what I wanted so obviously, went for the genuine Yamaha ones. Super fast shipping, well packaged, fit just great. No problems, all went smoothly View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10
Original part, really impressed
Purchased to replace the damaged one I have on my bike. Easy to find the part just by using the yamaha parts website. Packaging was excellent as always. Shippping speed was pretty good to the UK. Upon receipt, item was 100% perfect, no damage as very well cushioned. Very easy to fit, great finishing from Yamaha. Very impressed. Well done webike View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10
Original part, really impressed again
As with the previous review for the opposite side. ALl was perfect, easy to find the part I needed. Shipping was awesome, packaging, again.. awesome. Upon receipt, everything was 100%. Really easy to fit. No issues. Well done Webike View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RA 2AC, HONDA CBR1000RA 2AC, HONDA CBR1000RA 2AC, HONDA CBR1000RA 2AC, HONDA CBR1000RA AC, HONDA CBR1000RA AC, HONDA CBR1000RA AC, HONDA CBR1000RA AC, HONDA CBR1000S1 2AC, HONDA CBR1000S1 2AC, HONDA CBR1000S1 2AC, HONDA CBR1000S2 2AC
Shipped very fast. packed perfectly.Thanks
Shipped very fast. Packed perfectly. Fitment as should be OEM part. Ordered few parts from Webike. Prerared for shipping on time. Sent by Fedex. Recieved on time. Condition New, was Packed carefully. View detail
Fits: HONDA GROM125, HONDA GROM125, HONDA GROM125
Right Rear Shroud from Honda
* About quality and texture, The shroud is molded from ABS plastic and finished with a red paint in traditional Honda style. * About the feeling of use, The red rear shroud is a much more celebrated colour choice then the original yellow colour and has perfect fit and finish. * Products to buy together, The left rear shroud is needed to complete the colour change for my Grom. * Difficulty of installation, The installation requires the seat and center rear shroud to be removed to allow for access to the fasteners and positioning of the shroud. The process was completed in 20 minutes with no difficultly. * Cost performance and comparison with other products, The price to replace all three of the rear shrouds for a colour change is better then getting the original shrouds painted locally but slightly more expensive when compared to the option available from SNB but there was no customer reviews on the product so the Honda replacement part was the safe option. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you are interested in another colour then view the Honda MSX125 (GROM) OEM parts for the available colours here on Webike. Use the product reviews to assist in making a decision on your purchase. View detail