Reviews
To new.
It is reasonably priced and works well for rust removal, removal of bad stains, and polishing.
The one I had purchased before had been used for quite a long time and had become tired, so I was able to purchase a new one.
It is also reasonably priced, which is helpful as a consumable during maintenance.
View detail
Polishing
I bought it before as a trial and it was so good to use that I bought more.
Compact and easy to use with short branches.
It is useful to carry it with the loading tools so that you can polish the Plug when the need arises.
View detail
Well this
I purchased this product to polish the base of the exhaust pipe (chamber) of my DT50 because the paint had peeled off after years of use and it was rusted and gunky.
It didn't fall off as hard as I thought it would. I think it would have been better to use something like a jetter or TippingHammer to roughen it up a bit and then polish it.
The handle is a little difficult to hold. I think it would be easier to use if the corners around the grip were removed
View detail
Very effective for cleaning inner axles of Wheel, etc.
Purchased for maintenance of a friend's moped scooter.
It was mainly used to clean the inner axles of the Rear wheel and DrumBrake lever when replacing the Rear Drum brake.
First, apply Cleaner firmly, then add more Cleaner each time while polishing with this product.
The dirt was removed amazingly well.
We applied Grease while using this product as a brush at the end, so I think it has a lot of applicability.
Motorcycle parts are often inaccessible due to the large size of the body, so the large size was very useful this time.
Since it is not an expensive product, it should be disposable.
In that sense, I think it has excellent Cost performance.
One difficulty is the hardness of the brush part, which is made of gold, although this is to be expected due to the performance of the product.
Do not hold the Brush part with your hand when actually using it in your work.
View detail
KTC Tension Spring Tools
I did not have a proper tool for removing and installing springs, so I purchased KTC's Tension Spring Tools.
It is useful to have a well-made tool for maintenance of scooter and removal/attachment of exhaust system.
When I actually used it, I was able to use it with confidence because I could apply force firmly against the tool.
View detail
It's cheap
I bought this for the Piston Polish on my Brake and it was easy to use. I would have used the Tooth Brush if I had it, but I think the Tooth Brush is just fine. View detail
Costa bad!
I have the one from Tone and it is convenient, so I bought it to see if there is a difference.
I bought the one from Tone for 800 yen on Amazon, but this one is about 1300 yen.
As for the quality of things, I think Tone is better. (Material is iron over there?).
This is Plastic.
It is marked every 90-degrees, so if you want to tighten angles or if you don't want to use KTC, you can buy this one.
Personally, I prefer tones as a cosmetic and object.
View detail
At the back of the toolbox.
This one is always in the back of the tool box. w
I don't get a chance to use it very often, but it is in the back of my tool box, wondering when I will use it.
The handle is easy to use and easy to apply force.
View detail
It's a must-have, the soul in a small tool?
I am the second generation as my predecessor is getting tired.
It can be used to turn the bolt and nut of the Small Torque by hand, and after tightening the bolt to a certain degree, it can be used to manage the Torque with the digital ratchet at the end.
I am Regular in almost Bolt nut fastening work, such as from narrow and normally medium Torque is using Large body.
To prevent breakage, the Ratchet is then fitted and fastened to the Ratchet when turning it by hand, which allows for quicker work.
The resin part is good-looking, but KTC's product is lighter than other companies' products, so perhaps this resin is fine.
Furthermore, I think the reason for the "Pink" resin is to make it stand out in the tool box so that it can be easily picked up.
If my guess is correct, I'm convinced that KTC is the quintessential KTC.
View detail
DAYTONA Rubber Seal Pick Tool Set
About quality and texture - Top quality. Solid steel shaft with no flex when used and a comfortable hard plastic handle. About the feeling of use - Comfortable to use for extended periods of time and easy to use in tight spaces due to their compact nature. Products to buy together - Daytons Garage offer many great tools but their magnetic silicone tray would be the best to added to the cart with the purchase of their pick tool set. Difficulty of installation - Very simple to work with these picks but do be care when using them close to your body as the ends are quite pointy and you can easily injure yourself. Cost performance and comparison with other products - Great pricing for a top quality set of 4 picks that will get many different job done for you due to their varied shaped ends and the best value pick tool set available here on Webike compared to the other brands. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - This set is perfect for working with O-rings but I would not recommend using them to help loosen radiator hoses as they are too small to handle the force required for that type of job. Look for some larger picks for that type of work. View detail
For Plug cleaning
I bought this brass brush for Spark plugs as a trial for cleaning plugs and removing carbon.
The hardness of the Brass Brush and the comfort and ease of use of the wooden Handlebar are good. May it be done quite nicely.
View detail
I use it to peel off O-rings, etc.
I use this product to peel off O-rings, etc. I used to have a lot of trouble peeling off old, hard-to-peel SCENE, but no more! I used to have old, hard-to-peel SCENE, but no more trouble! View detail
Easy to use
The wooden handle is easy to hold and the amount of Brush is abundant, which is a feature of Large.
It is very easy to use for removing dirt from Drive chain and rust from Parts.
Since it is Brass, it is hard to scratch the Gold genus and effectively removes Rust.
View detail
For polishing in tight spaces
It is good for use in tight spaces or corners where a regular Large size polisher will not fit.
Included Parts:is also very comprehensive and useful for final finishing of painted surfaces in tight spaces.
View detail
easy to handle
The lightweight body of the resin type is very light to use.
The Grip is also easy to grip and use.
Gold is cold in winter, but this is not the case with this product.
View detail
Good
It is useful for picking up Nuts and Bolts that have been dropped in a crevice.
The magnetic force is strong enough so that it will not fall off in the process.
Shaft free, so it is easy to reach the targeted area.
View detail
Easy to use
I used it to remove rust from Parts and Rust from Chain.
Wire has good hardness and sufficient density, making it easy to use and work well.
It is easy to hold and efficiently drops Rust, which increases work efficiency.
View detail
Convenient
The well-made design allows the Clip to be removed without bending.
The shape is good, so it is easy to fit into the gaps between panels, making it easy to work with.
Material:Plastic, so there is no need to worry about scratching.
View detail
![[Aebs] Caliper Piston Removal Tool](https://img.webike-cdn.net/catalogue/19270/06241419_51c7d6d9718e4_TS.jpg)
Convenient to have
It would be useful to have it in the Overhaul of Brake Caliper.
The Caliper piston can be quickly removed when pulling out the piston.
It is a good product because the Piston can be removed without difficulty even without an air gun.
View detail
Lightweight.
Usually it is heavy with Gold genus, but this one is light.
The price is also Reasonable.
Unlike Gold, it does not get cold in winter, so it is easy to use for a long time.
Long nose is also good for injecting into small areas.
View detail