Reviews
Fits: SUZUKI GSX-S125, SUZUKI GIXXER 250, SUZUKI GIXXER SF250, SUZUKI GSX-R125, SUZUKI GIXXER 150, SUZUKI V-Strom250 SX
Extension Harness Min.
Quantity of 1 Set for 1 Vehicle to install TRL2Blinker:Set.
TRL2 LED Blinker*4
Mount for TRL2*4
Extension Harness (long)*2
Extension Harness (short)*2
MicroIC Blinker Relay*1
Small and very Stylish
The mounting is done by sandwiching the Mount with the Plate, and since the hole is small, the Bullet Type Terminal is inserted while shifting it slightly.
The price is almost the same if you buy them individually, but you save money for the Extension Harness.
The included MicroIC Blinker Relay is about the size of a small finger, so you should have no trouble finding a place to place it, but the terminals are bare, so be careful not to touch the Gold Genus.
View detail
From Halogen to LED
The installation itself is easy, but it was very Large strange to fit it inside the Headlight.
Headlight floated and was very hard to close. I had to adjust the Wiring many times, and after pushing it in with a lot of effort, I couldn't close the Screw by myself and had to ask my family for help. I wonder if the Wiring I pushed in is Large sturdy… Spring was used as OEM.
View detail
Reasonable。
I replaced the Large size scratched by a stepping stone. View detail
Fits: HONDA APE, HONDA BENLY50, HONDA DAX, HONDA MONKEY, HONDA CT110 HUNTER CUB, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA CL400, HONDA FTR220, YAMAHA SRV250, YAMAHA RENAISSA, YAMAHA BRONCO, YAMAHA TW225, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, SUZUKI VANVAN, SUZUKI GN125, SUZUKI GS125, SUZUKI VOLTY
Blinker replacement
Replacement was easy, but the Valve needed to be replaced because it was a high flasher. View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
Punching in as is
As per Title, it can be popped on as is.
Visibility from other vehicles, such as oncoming traffic, has increased, so I think safety performance has improved.
I don't know about durability so far.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
KSR2 is mounted and brightness is OK.
I installed it on my KSR2 and the brightness Level is OK both in Position and in Brake. Other users' impressions were that the brightness became dark, but with the KSR2, I was able to check the brightness even during the daytime and the Level is Large and sturdy.
The LED headlight is more expensive than the Pine Stripe LED headlight, so I can't say that it has superior cost performance, but the product itself is solid and a good product.
KSR is a small battery vehicle, so if you use a lot of electricity such as for an electric tachometer, water temperature gauge, smartphone charging, etc., it is recommended to use LED headlight and tail lamps to secure electricity quickly.
Finally, the packaging has been changed from a box to a thick vinyl package. I am concerned about the packaging of this delicate product if it is not packaged properly for mail order.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Brightness can be secured by attaching to KSR2
I installed it on my KSR2, and the brightness was maintained in both Position and Brake. I have seen some other people's impressions that the brightness became darker, but with the KSR2, the brightness is at a level that can be confirmed even during the daytime.
The price was higher than Matsu Stripe's LED headlight, so I can't say that the cost performance is excellent, but I think the product itself is a good product.
If the vehicle is powered by electric power (e.g., electric tachometer, water temperature gauge, smartphone charging, etc.), we recommend using LED headlight and tail lamps to secure the power.
Finally, the packaging of the product has been changed from boxed to thick vinyl, which is a bit worrisome since it is a Delicate product and if it is not packaged well, I would be concerned.
View detail
That would come in handy
I attached it for USB and DriveRecorder which I will eventually attach.
It is easy to install and is a very convenient unit to have.
View detail
Sufficient light intensity even when converted to low W
Used for KSR2 (B6).
Color of Pine Stripe:YellowMax is also used for the liter machine I own, and the moment I saw it. Hmmm, something weird just came in." I like the Large layer because of the Impact that makes me think "I'm not a big fan of the Large layer.
KSR2 OEMValve is 25W for both 12V and high low, and I used to use High Wattage bulb, but it was not bright enough and the life of Valve itself was significantly shortened. I am satisfied with the bright yellow color as I expected.
The Yellow Bulb is reputed to be easier to see in bad weather conditions such as rain, but I personally do not notice much difference. I personally do not feel that it makes much of a difference, but it definitely increases visibility from other cars, so that is enough for me.
View detail
Second car inspection
On the second inspection, I brought a NORMAL one with me just in case.
Vehicle passed inspection.
Maybe it depends on the workers?
View detail
Fits: HONDA Rebel250, HONDA Rebel500, HONDA CBR1000RR, HONDA NC750S, HONDA NC750SX, HONDA CBR600RR, HONDA CBR400R, HONDA CBR500R, HONDA Rebel300
buying a replacement
I was using Relay with sound, but I had to replace it because it was embarrassing because we both snapped at each other with delay even after Cancellation.
The effect is instantaneous.
Recommended
View detail
Wiring branch connections are easy and good.
The differences in Cable size and current capacity are easy to recognize depending on the color.
Note that the Cover is divided between the main line side and the branch line side.
*Because the blade directly bites into the sheath for connection, use in locations with a lot of vibration may result in disconnection or poor contact.
*Care should be taken not to reuse the area once used.
It is easier said than done, since the connection can be made with just one pliers....
View detail
Female terminal Cover Only
This is a Female terminal Cover Only product. A separate Female or Male terminal (Male terminal Cover) is required.
Since it is not waterproof, we recommend the purchase of a Waterproof Terminal Set if the connection is to be exposed.
Motorcycle and car Waterproof is rarely seen only in Connector, so I don't think it will be a problem, but it is a good idea to buy it according to your needs.
It is better to have it in Large quantity so that it does not roll around somewhere and disappear because it is a Small item.
Contact between terminals and frames may cause damage to electronic equipment or, in the worst case, cause a fire.
View detail
Reduction in cost with Large volume purchases
Bullet Terminal required for power supply connection for cars and motorcycles.
It is safer to buy more than the required number of units in case of failure.
It is hard to pull out easily when firmly connected, so when pulling it out, grasp the terminal part firmly with a radio pliers or the like.
This product requires Cover and Male terminals as it is Female terminal only.
If you are only going to use a few of them, it is better to buy Bullet Type Terminal Set.
I have never purchased anything other than Emon, so I don't know for sure, but it is best to purchase Male and Female terminals from the same manufacturer.
The Female terminal is recommended to be used on the + (Plus) side since the connection will be covered when the Cover is attached.
View detail
Reduction in cost with Large volume purchases
Bullet Terminal required for power supply connection for cars and motorcycles.
It is safer to buy more than the required number of units in case of failure.
It is hard to pull out easily when firmly connected, so when pulling it out, grasp the terminal part firmly with a radio pliers or the like.
This product is Male terminal only, so Cover and Female terminals are required.
If you are only going to use a few of them, it is better to buy Bullet Type Terminal Set.
I have never purchased anything other than Emon, so I don't know for sure, but it is best to purchase Male and Female terminals from the same manufacturer.
The Male terminal is best used on the ”-(Minus) side because the connection part is exposed even if a Cover is attached.
View detail
Required for Wiring processing
Required Items for connecting Bullet Type Terminal in Wiring
It's priced right, but I think it's necessary and sufficient.
I think it's better to lubricate it because it's not moving well.
View detail
Male terminal Cover Only
This is a Male terminal Cover Only product. Male and Female terminals (Female terminal Cover) are required separately.
Since it is not waterproof, we recommend the purchase of a Waterproof Terminal Set if the connection is to be exposed.
Motorcycle and car Waterproof is rarely seen only in Connector, so I don't think it will be a problem, but it is a good idea to buy it according to your needs.
It is better to have it in Large quantity so that it does not roll around somewhere and disappear because it is a Small item.
Contact between terminals and frames may cause damage to electronic equipment or, in the worst case, cause a fire.
View detail
For vehicle inspection.
[How is it used?
I purchased this product because another LED taillight was indicated to have insufficient area to pass the bb1 inspection.
Was the installation difficult?
For RaceCowl, the addition of a Holder and Bracket was necessary. The installation itself is simply a matter of fastening two bolts to a homemade Holder.
How was your experience with it?
The car passed inspection with no problems. The LEDs from License Plate Light are bright enough for the tail lights and Brake lights.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail
All in order
Article well protected and delivered in a reasonable time, I would like them to create an app for cell phones. I recommend the service. -------------------------------------------------- -------- Article well protected and delivered in a reasonable time, I would like them to create an app for cell phones. I recommend the service. Powered by Google Translator View detail