Reviews
Fits: KAWASAKI Z H2, KAWASAKI NINJA H2 SX, KAWASAKI Ninja SE+(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002BKF), KAWASAKI Ninja H2 SX(ZX1002AKF), KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE(ZX1002AKF), KAWASAKI Ninja H2 SE(ZX1002BKF), KAWASAKI Z H2, KAWASAKI Z H2 SE
Good
Hello everyone, here I recommend everyone to buy this product, it can prevent our belts/coats from being scratched, it is a very good product, not only beautiful but also very effective. View detail
I was able to mount it on my 2003 RS.
I switched it out because my butt was getting sore on the Touring.
I think it's comfortable, not too soft, not too hard, just right.
It's about 4 cm higher, and it's also wider and more angular, so the footing changes quite a bit.
Position-wise, you're going to be leaning forward a little bit because your hips are elevated.
I'm 173cm and had no problem at all.
The appearance has a retro feel, and the volume of the Motorcycle is a little larger than before.
Also, I always play Tandem with my 9 year old son, and he says the wider and longer Rear section makes it so much easier.
I liked the Normal seat Forme, so I was not sure about it, but this was the right choice.
View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000 (Z1000SX)
OEM is good, but? .......
I bought it for my Ninja 1000, and installation is an easy job that can be done in 20 seconds or less, right?
As expected of OEMParts, quality is guaranteed!
However, considering the prevention of scratches when standing up and falling down, I thought the cover area was too small.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI Ninja ZX-6R 40th, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-6R KRT EDITION
Seat Cowl
Buy this OEM seatcowl, don't settle for cheap knockoffs. This seat cowl is very secure, fits perfectly, once it locks, it wont shake or come off. Comes with the toolkit compartment so you can still use and carry all the tools under the original seat. Instructions on how to assemble it are clear. Color matches perfectly with my zx6r. View detail
I want it installed by OEM.
It does not sacrifice footing and does not cause pain in the buttocks.
I would appreciate it if I could choose high or low when purchasing a new car.
View detail
I don't have pain in my buttocks, but ….
The cushion is good and there is no pain in the buttocks, but since the width is wider than the Standard Spec., the soles of the thighs and the base of the feet are compressed and it is slightly difficult to lower the legs.
The effect of the difference in height is not felt very much.
View detail
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI VERSYS1000 SE, KAWASAKI Ninja[Ninja ] H2 SE, KAWASAKI Ninja[Ninja ] H2 SE+, KAWASAKI Ninja[Ninja ] H2 SX, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000, KAWASAKI VERSYS 1000 SE
I don't know why, but there's no instruction manual.
I was confident that I could manage to install it because I had installed it on a Honda car in the past, but as a result, I failed. I am wondering why the instruction manual is not included in the kit. Is there an intention to prevent individuals from making their own work? View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja 250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250
To relieve buttock pain...
I decided to purchase the Normal seat because it was too hard to drive for a long time in the Normal seat.
It is not as cushiony as I thought it would be, but I can get a couple of hours more out of it than before the replacement.
I don't get butt pain. Of course...
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION
No problems with installation since it is OEM.
I purchased the single seat cover because I do not ride two people and do not carry luggage.
Installation is easy, as an Instruction Manual is included.
I am satisfied with the Large change in style after the exchange, but I think it is inevitable that the color tone is different due to the difference in reflections, as the Green Light of Tail cowl is a Sticker. I don't mind, but I have attached a photo for your reference.
Other Brand Products were inexpensive, and there were Carbon Style and many other colors, but I did not purchase them because I did not know the quality until I received them.
View detail
It's a replacement for comfort.
With OEMSeat, my butt starts to hurt after about 30 minutes of riding, so ….
High seats were introduced to improve the situation.
Cushioning has been increased, sitting is more comfortable, and the pain that occurs has not gone away, but it has improved considerably.
In exchange for comfort, the footing was only slightly worse because of the increased thickness.
View detail
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI VERSYS1000 SE, KAWASAKI Ninja[Ninja ] H2 SE, KAWASAKI Ninja[Ninja ] H2 SE+, KAWASAKI Ninja[Ninja ] H2 SX, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000, KAWASAKI VERSYS 1000 SE
I want the instruction manual.
I failed as an amateur because there was no instruction manual. I ended up having to get help, but to be honest, it was an unfriendly Parts. View detail
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI VERSYS1000 SE, KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja[Ninja ] H2 SE, KAWASAKI Ninja[Ninja ] H2 SX, KAWASAKI Ninja[Ninja ] H2 SX SE+, KAWASAKI Ninja 1000SX, KAWASAKI VERSYS 650, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja H2 SX SE
A must for long touring!
It is a necessity for long and overnight touring.
Once you start using it, you may not be able to ride a motorcycle without a Pannier case.
Ease of use and Fitting is also good.
As it is used, rattling will occur and it will need to be readjusted.
View detail
Green Light for Kawasaki
Prefer Green Light color scheme.
The firmness of the fit is very good.
View detail
Fits: KAWASAKI ZX1400 NINJA ZX-14R ABS 30TH ANNIVERSARY 1441cc All, KAWASAKI ZX1400 NINJA ZX-14R ABS 1441cc All, KAWASAKI ZX1000 NINJA ZX-10R ABS 30TH ANNIVERSARY 1000cc All, KAWASAKI ZX1000 NINJA ZX-10R ABS 1000cc All, KAWASAKI ZX1000 NINJA ZX-10R 998cc All, KAWASAKI ZX1000 NINJA ZX-10R 30TH ANNIVERSARY 1000cc All, KAWASAKI ZX1000 NINJA ZX-10R 1000cc All, KAWASAKI ZX1000 NINJA H2R 998cc All, KAWASAKI ZX1000 NINJA H2 998cc All, KAWASAKI ZX1000 NINJA 1000 ABS 998cc All, KAWASAKI ZX1000 NINJA 1000 ABS 1043cc All, KAWASAKI ZX1000 NINJA 1000 1043cc All, KAWASAKI ZRX400 400cc All, KAWASAKI ZR400 XANTHUS 400cc All, KAWASAKI ZR1000 ABS 1000cc All, KAWASAKI ZG1400 CONCOURS ABS 1400cc All, KAWASAKI ZG1400 CONCOURS 1400cc All, KAWASAKI Z800 806cc All, KAWASAKI Z750S 750cc All, KAWASAKI Z750R 750cc All
Genuine Kawasaki Oil Filter for GPZ750
The filter was easy to find, it also fits quite a few different models so is readily available. The price was really good, and still better than could source locally for the same Kawasaki part. As I always have more than one part in each order, the cost of shipping is really good. I generally use EMS Fast service as it gets to me very quickly and the tracking is full, I mean full as in every step of the journey. I know exactly when the order will be delivered, the delivery has always been on time. Every part in the order was well packaged as expected and the outer box was sealed on all sides so none of my smaller parts could escape. There is not really much to say about the finish of this oil filter as there is not really much you can see, the paint is clean and the threaded part is super smooth. The seal is intact and no tears, rips of dinks. Nothing is bad with Kawasaki oil filters at all. Never had any problems. The paint on the outer is really good and no runs or blemishes on it at all. The filter threaded on really easily and obviously, with any oil filter change, a small amount of oil on the end just to help seal.Fitted in no time at all and filled the oil in the engine. Runs really well and with the new oil, sounds a lot better than it did. Happy customer. Thank you Webike for all your help with the order contents. View detail
Fits: KAWASAKI ZX1400 NINJA ZX-14R ABS 30TH ANNIVERSARY 1441cc All, KAWASAKI ZX1400 NINJA ZX-14R ABS 1441cc All, KAWASAKI ZX1000 NINJA ZX-10R ABS 30TH ANNIVERSARY 1000cc All, KAWASAKI ZX1000 NINJA ZX-10R ABS 1000cc All, KAWASAKI ZX1000 NINJA ZX-10R 998cc All, KAWASAKI ZX1000 NINJA ZX-10R 30TH ANNIVERSARY 1000cc All, KAWASAKI ZX1000 NINJA ZX-10R 1000cc All, KAWASAKI ZX1000 NINJA H2R 998cc All, KAWASAKI ZX1000 NINJA H2 998cc All, KAWASAKI ZX1000 NINJA 1000 ABS 998cc All, KAWASAKI ZX1000 NINJA 1000 ABS 1043cc All, KAWASAKI ZX1000 NINJA 1000 1043cc All, KAWASAKI ZRX400 400cc All, KAWASAKI ZR400 XANTHUS 400cc All, KAWASAKI ZR1000 ABS 1000cc All, KAWASAKI ZG1400 CONCOURS ABS 1400cc All, KAWASAKI ZG1400 CONCOURS 1400cc All, KAWASAKI Z800 806cc All, KAWASAKI Z750S 750cc All, KAWASAKI Z750R 750cc All
Reliable OEM
In the past, we used to buy other brand products that we could buy at mass retailers, but after learning from a magazine filtertest that there is a wide range in performance, we decided to use a safe OEM product.
Other Brand Products have good performance as filters, but some of them are too fine and apply too much hydraulic pressure, causing the oil to bypass.
A well-meaning Filter is meaningless if the oil bypasses the Filter.
View detail
quite
I put the OEM Chain Cover of ZrX1200 DAEG, which is too long and wild for Accent, on the cut area.
I wonder if it's a little easy to get sand or Dust on the edge of the letters….
There are other Variations in different colors, so you can choose according to the area to be covered.
View detail
Looks good Parenthesis.
[How is it used?
It may be good for use in KCBMetc. but not for use on trains.
Was the one you received as per Image?
Street Image
How was your experience with it?
I am concerned about the gap around the nose since there is no NoseWire in it.
[Points to note]
If you normally use Mask with NoseWire in, you may be concerned about the gaps. Because I am too.
How did it compare to other products?
Compared to Nosewith Wire's Mask, I am concerned about the gap around the nose.
Also, the high price point is a pain.
Please note if you are using Nosewith WireMask.
Parenthesis looks nice though.
View detail
Leaks.
[How is it used?
I ordered a Kawasaki Key case because it is a Kawasaki car, and the color is Green Light to match my car. The color is Green Light to match my car body.
Was the one you received as per Image?
I purchased this product with the understanding that multiple keys would be able to be installed just by looking at the catalogue. I did not check the key hook inside.
How was your experience with it?
I immediately tried to use it in Touring, but a problem occurred. The key of the security good locked inside leaked out. No matter how many times I tried, it kept leaking out through the gaps in the leather. I chose a cover type key case to prevent scratches, but it was no good at all. When I looked at it carefully, I found that (1) the key was too small and leaked and (2) the hook on which the main key was hung pulled the key to the ring, and the key was pulled out along the way.
[Improvement Point
So, I bought another Ring (made of Stainless Steel, less than 100 yen at HOMSEN) to make the Main key independent. I bought one more Ring (made of stainless steel, less than 100 yen at Homesensee) and put it on. As a result, it looks good without leaking other keys. I don't use it very often, but the Belt hook works well. Now the KawasakiBrand is protected. (Lol) PS:By the way, the main key is left out.
View detail
Installation of KawasakiOEMSide grip
18-21 in the product description. (2BL) but 23 (8BL) The custom is easy to install even for beginners, just remove the four OEMB bolts from the lower part of the Seat, install the side grip using the supplied bolts, and tighten. It is very good to be able to change the direction of the vehicle by holding the grips. I had a lot of doubts about it, but I think it is a good part to install. View detail
KAWASAKIOEMSide grip
I ordered KawasakiOEMSide grips from Webig, which I had been wondering about for a long time, and installed them because the underside of the seat was in a state of flab. When I installed it, I could feel the volume and it looks very custom. The installation was very easy, even for a beginner, as it only took a few minutes to remove the 4 screws and tighten them using the included screws. View detail