Reviews
Slide except
I bought it with Ratchet I want to tighten it from loose state which Bolt is not tightened. If there is Spinna there is not much difference, so please try using those who have never used it.
Just slip on the resin but there is slip more than I expected though Grease and oil. Also working with hands and gloves in the winter.
Since there are quite a thickness and a large size, too, the Ratchet of the Compact head protrudes too big and the narrow part is not good..
Performance, more convenient is the value of the tool, but now I am using Spin Na which was Knurl-processed with Tone's Aluminum at Main.
View detail
From the measurement to the basics of maintenance
Thickness Gauge (Clearance Gauge JIS B 7524) Is a tool for measuring dimensions by inserting thin gold plate called Leaf in a gap.
There are tools such as Vernier calipers and Taper Gauge to measure the clearance, but Thickness Gauge is a tool to accurately measure the dimensions of narrow clearance that can not be measured by them.
Each piece of Gauge is called Leaf, it is standardized by the Japanese Industrial Standard and in a narrow sense it refers to one Leaf.
Material is generally carbon tool steel (SK2~5) , Hardness HV 400 or more. There are two kinds of special grade, standard grade depending on the tolerance of tolerance of Leaf and tolerance of warp, and it is used to adjust Clearance etc. of Tappet of Engine.
Depending on the shape of the tip of the Leaf, it is classified into two types, one with rounded tip is called A shape, and one with pointed tip is called B type. The thickness is 0. From 01 mm to 1 mm, Length is 7. There are sizes of 5, 10, 15, 20, and 30 cm, which are used depending on the scene and purpose.
Before use, clean up in advance - Check and make sure the surface is free of dirt, rust and scratches. Particularly thin Leaf is sharp, so there is a risk of injuring your fingers, so care must be taken in handling.
The measurement target includes a management value (Service manualetc. ) Or past measurement values, give an approximate estimate to that value and select the corresponding Leaf. In addition to using Leaf one by one, combine several pieces and use it with an arbitrary thickness.
After use, wipe off moisture and dirt, Dustclothetc. Let's apply OIL thinly, put it in case and store it in a place with low humidity.
It is prudent not to use detergents containing volatile detergents such as penetrating Spray and quick-drying Parts cleaner for maintenance before storage.
Because penetrating Spray contains many ingredients close to kerosene, it dries in about a week. When drying, oil is decomposed with the surface of Gold genus, which may cause rust instead, it is not suitable for long term storage.
This KTCThickness GaugeTG - 98 contains nine leaves, Size is 0. 04,0. 05,0. 06,0. 07,0. 08,0. 10,0. 15,0. 20,0. It is 30 mm.
The storage is thick Size on the outside, thin Size on the inside, and it is very attentive as it is attentive to reduce breakage.
Maintenance tools as well as Motorcycle, wear out if used.
With a tool that is beyond the tolerance range, we can not do good maintenance, so I made one new one.
View detail
For Gap adjustment of Plug
When I purchased Watani's PowerCoilKit, I got Plug's Gap 1. 1~1. It was written as 3 mm in use.
Although it may be possible to spread by a slotted screwdriver as well, it was possible to measure the gap without measuring the Thickness Gauge, so we were looking for it, mostly for measuring the 1 mm or less for Valve clearance.
This Thickness Gauge is Point - 1 for Plug. It was able to measure up to 3 mm and it was attached to Hook for Gap adjustment so we decided to purchase without hesitation.
Because I do not need Valve clearance for greed, Point - It is good to lineup only for Plug cheaperly, for Valve clearance and Point - I think that it is easier to adjust if it is made to be separate type instead of one for Plug.
Adjustment is good because it was possible without problems.
View detail
no doubt
Because there is maintenance which can not be done without removing Exhaust System, Spring Tools was necessary. KTC purchased in terms of reliability. It's a simple tool to pull Spring, but it's a simple one, but it's likely to be used for the rest of my life. Since Silencer is also quite dirty when you try to remove it, let's clean it out occasionally..
It is a post of years ago.
The item is a good item at Longtime seller.
However, webi's imprinting and WEBLINK cutting of the product site are terrible!
"Product Data was missing" , But it is a Longtime seller product.
So post again.
The product LINK of webi is out immediately although the product is unchanged. I can only believe that I am stupid of customers who are posting Impre.
Separately I do not want it because I want a point. I just want to tell everyone about the right information.
View detail
A narrow place where ordinary Driver can not be used is OK
Useful in places where ordinary Driver can not be used.
Also, with Ratchet function, it is very easy to use.
Because it is made by KTC, Bit's accuracy is also high, I think Screw is also hard to lick.
View detail
The screw thread of the portion which has attached to the car body the Carrier which has attached the Top case broke. It is used for removing this screw thread that broke. Rather than , how to remove except this product (reverse Tap
The
screw thread of the portion which has attached to the car body the Carrier which has attached the Top case broke.
It is used for removing this screw thread that broke.
Rather than
, how to remove except this product (reverse Tap type) is not learned.
When using, because he bought a Handle cheaply, also when the portion (top quadrangle portion of a Screw) which has attached the Screw to the Handle
idled while turning
, were, but.
Since the Handle may be worse, there is no telling whether to be a thing with bad this
goods.
The screw thread with which the Screw broke happily before no less than ten rotations entered came out, and came.
View detail
The KUKKO currently used as a Puller in the company. Since the Attachment at the tip of has been cracked, it offers that he wants a new tool and is... if it purchases in the legitimate channel (from the machine delivery Manufacturer of a Ge
The KUKKO currently used as a Puller in the company.
Since the Attachment at the tip of
has been cracked, it offers that he wants a new tool and is... if it purchases in the
legitimate channel (from the machine delivery Manufacturer of a Germany) ... they were the estimates 25 and 000.
-- when saying so, it was treating by a KUKKO and Mr. webike -- If .. is thought and it searches .. it was.
-- moreover, it damaged -- at least the end part is sold -- carrying out -- ~♪ --
-- above all, there was little expense and it ended.
View detail
After removing a Bolt, are you polishing the Screw eye? If this is neglected in fact, a Screw's not entering well and a proper bolting Torque will stop starting, and it will carry out the worst adhesion. Is it having encountered such an eye how
After removing a Bolt, are you polishing the Screw eye?
If this is neglected in fact, a Screw's not entering well and a proper bolting Torque will stop starting, and it will carry out the
worst adhesion.
Is it having encountered such an eye how many times in
previous occupation?
It is although it is only carrying-out-in the Bolt polish itself (bitter smile.) well.
To the dirt got blocked in the Screw eye of the
Bolt, it is burdensome with a resin Brush, and this is first.
It is the best also for rubbing gently, rusting and dipping the rusty Parts in liquid again.
Although
STAINLESS-STEEL Wire brush is powerful, since it is too powerful and a crack may be attached, unite with TPO.
being rudely treated in a
previous office in many cases -- everybody -- although hair ends were open into Ha's handwriting --
-- when it uses only by required power carefully, it is such a thing even if five year passes.
KTC Logoes are also a Cool and a Brush which we recommend to you just for a moment.
View detail
Convenience is also dramatically expensive in the ability to use in a narrow place.
Convenience
is also dramatically expensive in the ability to use in a narrow place.
View detail
It purchased to Tappet adjustment. Since there is die length, it is easy-to-use during adjustment.
It purchased to Tappet adjustment.
Since there is
die length, it is easy-to-use during adjustment.
View detail
Simultaneously with exchange of a Plug, the Wire brush was replaced on the assumption that it dropped [ Carbon ]. Since quantity rotation is not issued frequently, a Carbon does not accumulate easily, but it is trying to clean periodically.
Simultaneously with exchange of a Plug, the Wire brush was replaced on the assumption that it dropped [ Carbon ].
Since
quantity rotation is not issued frequently, a Carbon does not accumulate easily, but it is trying to clean periodically.
Since there is a use in
etc. plentifully, I would like to use carefully.
View detail
It is used in combination with a Socket + Extension bar. Since a Torque can be firmly applied in the combination of this Handle and a + Socket + Extension bar, can be removed
It is used in combination with a Socket + Extension bar.
Since a Torque can be firmly applied in the combination of this Handle and a + Socket + Extension bar,
can be removed easily.
structure is also dramatically solid, a Slide is also smooth, and the feel which acts as Locke in the middle when using it for T type, carrying out is also exquisite.
a Ratchet -- already -- also turning -- since it can do, shortening of working hours is also possible.
I find it useful dramatically at the time of desorption of the Bolt of a Wheel be a MONKEY.
View detail
- Attach and use the Socket of a Size to use for a Socket-type tool. A Round and round and a Bolt can be turned also at the narrow place into which and the tool which has a hole to which this [ Ratchet ] is attached in a back part cannot go easily.
- Attach and use the Socket of a Size to use for a Socket-type tool.
A Round and round and a Bolt can be turned also at the narrow place into which
and the tool which has a hole to which this [ Ratchet ] is attached in a back part cannot go easily.
to which a hand will become painful if it has, and strong power is put [ use ] since good
and the red portion of a hand are skid prevention and it is notched when the beginning loosens, and except when the last fastens -- convenient, when you are in a tool box, although it does not go to [a general comment
] and a required tool.
Since it is user-friendly, even if a Torque is weak, it arranges an OK place by this one.
View detail
It is ♪ satisfaction which efficiency went up to fixing!
It is ♪
satisfaction which efficiency went up to fixing!
View detail
using T type, as it is in other Impressions -- already -- also turning -- it can do, and it can be used to impose a Torque even if it uses L type. What it is easy to carry on a Touring etc. above all is convenient, and it is good. The portable
using T type, as it is in other Impressions -- already -- also turning -- it can do, and it can be used to impose a Torque even if it uses L type.
What it is easy to carry on a Touring etc. above all is convenient, and it is good.
The portable tool bag something is made to bear an Extension bar and several kinds of Sockets together.
Structure of
details is KTC truly.
The touch which it had in the hand comes exactly.
When there is one for
Rider, is it a very useful Tool?
View detail
The portion which becomes an elevated temperature most immediately after the engine side flange of a Chamber. It rusts here easily very. since it is the Restore -- with much trouble -- therefore -- the Chamber was also refreshed.
The portion which becomes an elevated temperature most immediately after the engine side flange of a Chamber.
It rusts here easily very.
since it is the
Restore -- with much trouble -- therefore -- the Chamber was also refreshed.
First of all, it is rust dropping intently with this Wire brush.
Next, it is a sanding Sponge.
It is from 180 to 400 about
and a water resistant paper.
The portion without the
Rust omits a Brush and a Sponge.
It finishs that it is also at
by thick coating of a heat-resistant Paint.
View detail
SIGNET 65331 It is an Impact wrench of 1 / 2 angle Drive. Since the Impact wrench of 1 / 2 angle Drive domestic usual Size used for ten years or more had come to have felt it heavy, it decided to update, since it gains that it is a Sale and is
SIGNET 65331 It is an Impact wrench of 1 / 2 angle Drive.
Since the Impact wrench of 1 / 2 angle Drive domestic usual Size used for ten years or more had come to have felt it heavy, it decided to update, since it gains that it is a Sale and is pleasing at the shop front of a tool store.
As the
photograph, though it is 1 / 2 angle Drive, the Size of 3 / 8 angle Drive and weight are also approximately the halves of the Impact wrench of 1.1 kg, and 1 / 2 angle Drive usual Size, since a center-of-gravity position is near the Grip, also single hand, it can brandish and a small turn is effective, and it is easy to treat.
Though it is this Size, from 540-Nm Torque 出せます standard as 1 / a 2 angle Drive,
The Wheel nut of a car can manage the work up to about 100 Nm ~ about 140 Nm, such as a Rear-axle Nut, a Drive sprocket, a Clutch center, and a Pulley, without difficulty, if it is natural (there are probably most these uses) and a Motorcycle.
Since
positive rotation (right) can perform a three-step Torque change, if it grasps to what Nm it tries, strikes and carries out in a specific conclusion part, and is set, it uses conveniently.
It is although I use only in the direction loosened by counterrotation (left) full admission. -- The change of
positive counterrotation can be operated as [ Grip 握った ] with the Lever beside a Trigger.
Although it is in the position of the right-hand thumb at the time of
shipment, I think that it will be a kind design that setting out can be changed now so that the reverse side of a Grip, i.e., a left hand, can use if it is made to rotate 180 degrees, pulling a Lever.
The Air inlets are also swivel mounts which cancel Hose 捻れ again.
Although it is made in Taiwan, 銘 of SIGNET is also contained, and since the
main part is handling of firm import origin, it thinks that maintenance service is also satisfactory.
It is one article of a Recommendation at
サンメカ.
View detail
[Webike Monitor] They are means even if attached to the Ratchet. They are means even if it uses only the Socket independently. Although it is not indispensable, if it is, it will be a tool which improves working efficiency. It is conv
[Webike Monitor] They are means even if attached to the
Ratchet.
They are means even if it uses only the
Socket independently.
Although it is not indispensable, if it is, it will be a tool which improves working efficiency.
It is convenient and it becomes impossible to part with it.
View detail
It is a tool as considerate !. It has in work [ at a narrow place ], and is deep. I am glad if it says as [ my ] just for a moment, and the number of section of a GEAR is finer. After loosening, operation has become possible with a
It is a tool as considerate !.
It has in work [ at a narrow place ], and is deep.
I am glad if it says as [ my ] just for a moment, and the number of section of a GEAR is finer.
After loosening, operation has become possible with a finger, but it is that whether to turn by lighter power is easier-to-use here.
While using, it hopes to become good touch.
View detail
It had a magnet hand with a light of KTC from the first. As the top was broken and the light having worsened, I purchased a different one this time. When gathering a bolt etc., the magnet adhered to the car body and a bolt was dropping by the vibration et
It had a magnet hand with a light of KTC from the first. As the top was broken and the light having worsened, I purchased a different one this time. When gathering a bolt etc., the magnet adhered to the car body and a bolt was dropping by the vibration etc before. However, the magnetism of the side posiion of a magnet is weak, and adhering to a car body is lost, and I can work very easily. Moreover, a wire is contained inside, and it can change a form freely and can also be fixed, and if that wire is extracted, it can also be changed into a free's state (a form is not fixed), and can be chosen by work. View detail