Reviews
Large Easy to use.
It was a product I was curious about before.
Do not think that you can easily Lift up so easily
I'm surprised.
Easy Motorcycle lifting, even if you do not have power, you can release without anxiety.
Because I am making well, Motorcycle Maintenance, Wheel polish etc. I want to use it for a long time.
View detail
Fits: KAWASAKI Ninja 250R, KAWASAKI Ninja 250R
Functional, exceptional storability!
We are looking for a Front stand that does not take up space for storage because it is being maintained at the bicycle parking lot in Apartment.
Although I did not understand how to use at all in the photograph and the explanatory note of the product page, since it was said that it was able to be used without problems with the Impression of others, I bought it with a half-trust.
Even if it arrives, handling Instruction Manual was not attached either. Anyway, when I apply it to Motorcycle, I see.
With the middle stick in the hole of Stem, lifting it on the principle of Lever, the part of the foot naturally supports the upright foot support.
It takes a little power when lifting, but it is enough for function.
Material : Because it is Stainless Steel, I do not seem to worry about Rust.
When used in conjunction with Rear stand, stability feeling seems no problem.
You will be able to exchange Tire and Front fork as well.
I feel that the price may be a little cheaper, but I think that this is only Compact, no other functional one.
View detail
This item has this Gold amount.
Used for ninja 1000 Be careful not to attach Wound to Fender when setting
When lifting it can be raised safely comfortably without anxiety during use.
View detail
Maintenance essentials
Previously, I used cheap items purchased with a certain ok, but I lack the height to lift the Front of the Liter machine, interfere with Cowl if I shoot Cowl ... And I'm worried about strength ...
At the time of Sale, I dared to buy it.
Because height can be adjusted, I think Kitchester Front will be raised, I will not interfere with Cowl and I'm glad I bought it.
FrontLift can also be done comfortably.
The difficulty is that when you Rose around Front, only that there is no place to hang Brake.
For the time being, I hang Brake with In Hemp palmak, but I wish SIDE to be able to hang Brake.
Overall, it is a very satisfactory product.
View detail
Satisfaction bought!
NINJA 2 Helmet50RR to Zentaiya's ZX-6RReplicaUpper Cowl equipped car!
Although I had a Rear stands, Front stand was holding on thinking about the price and frequency of use.
In replacing Front tire, I decided to purchase because I want to remove Front wheel !!!
We assumed that maintenance frequency will increase in the future.
We examined what kind of Manufacturer, but decided to J-TRIP same as Rear stands with emphasis on JAPAN reliability.
good point
- Even with Cowl can be lifted as it is.
- Can be lifted with light force
- There is Pipe strength
- Both SIDEHook in Hemp palm lock convenient
Good for temporary placement after removing Caliper
A bad point
- Manual manual Copy is too poor
It shrinks A4 further to A5 Thanks to SmallCopy, characters are small and it is hard to see
The important note is thin and can not be read at all
From the PL method - -
Supplement : I contacted Manufacturer and received it in PDF. Correspondence is good.
- Material : There are bubbles in PlasticTire (Really JAPAN?)
- Tire mounting parts color processing is 1 / 4 There is BALI and Bolt does not pass
In the corridor to be filly with File ,,, (Really JAPAN?)
- Interferes with Fender when removing Tire, it is safer to remove Fender from the beginning to prevent Wound
- expensive
View detail
Very easy to use!
I am using it for GPZ 900R.
Very easy to use, you can easily raise the Front and Maintenance will make progress.
I think that it is the case other than GPZ 900 R, but I have to think about handling such as Brake hose.
View detail
Simple STAND, but finishing, ease of use, arrangement is wonderful.
Used for Warmer winding and Wheel exchange in Circuit.
Transporter got Small, I was suffering from loading, so purchase this product.
Simple STAND, but finishing, ease of use, arrangement is wonderful. Finish beautifully light. Transportter loading is preeminent because its dimensions are Compact.
The disadvantage is stability. Is stability feeling inferior to Large width in Roller type
Let's do until Wheel replacement.
Well, this Type is useless.
Also, the insertion point, the accuracy of the boss is too high Requires kitchen wear.
Those who are considering purchasing please check the system of the insertion mouth well. I can not use it because of a systematic difference
View detail
Normally it is enough if Maintenance
We thought as if we could rise with heavy car of GSX 1300 R HAYABUSAClass, but it went up very quickly.
There is a danger of falling down if you do not do height setting firmly.
When the height Balance is bad, I can not understand it because I can not do Lift up easily.
* Height Balance It may collapse if raised further in a bad state
○ Wheel cleaning
○ Wheel desorption
× Fork desorption
× Handlebar operation
I am using Wheel cleaning Main so it's enough.
When using this I think that it will be hard to get scratched if you put a curing tape on the part in contact with Fork.
The large size of STAND is also about the same as Rear stand, so it is not too troublesome to store it.
I have to count the number of times until I get used to it "ease of use" It is ☆ Minus 1.
View detail
It can not be used for Maintenance around Front
20 years ago Material : I bought Aluminum 's Front stand, but on the first day I used it
The welding where the steering stem is supported is peeled off, after that the lower half is used as Rear stands and the upper part of the weld is continued to be used for Boots drying.
From this topic, the Front side has never used only the type supported under CaliperMount.
When M1100 was used, I used FTire exchanges with the same Manufacturer, but when Tire and Shaft are removed, the STAND will be distorted inward and force to the transverse direction will be applied to FFork.
Shaft did not enter and it was a hard time when I put on Tire.
This product is durable and easy to use and satisfied.
I am surprised because it lifts with a light force.
It is bulky because it can be kept upright when not in use.
View detail
It can not be used for GSX 1100S
It is explained that it corresponds to most Motorcycle, but it was not usable for GSX 1100S. Because the position of the vehicle's Stem hole is high, Front tire will not float even if the STAND is the longest.
I am using only genuine to keep the state as it is after the Tire is removed, without ginger, Tire is floated to remove Tire using Jack.
We need a little more polite explanation.
View detail
Please increase Color variations.
It is very easy to use as stated by everyone, and the appearance when using STAND is also Parenthesis so if you have plenty of time there is no loss by purchasing.
The only request "I'd like you to increase the color variations" is.
I'd like you to set Color that Lineup to Rear stand at least for the Front side !!
Well, as compared with Rear, Front's sales volume is small, but at the very least it is good ordering, so thank you..
View detail
Front stand of J-TRIP
? 【What made you decide the purchase?】
There are items of around 5000 yen in NetShop, but I made it reliable J-TRIP characteristics.
Moreover, Fender can be raised without hurting Fender with ForkUp.
? 【How was it actually used?】
I was worried that I could lift it well but I can lift it steadily by using with Rear stands. It is stable without fluctuation after lifting.
? 【Was it difficult to install? (Hard parts case)】
Just to be sure, you can lift without fear if you hold down Front tire or Cowl and lift it up.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
Butterfly Screw Since it is possible to change the width by tightening method, stabilizing by keeping the interval of Fork measured.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I want you to make it a little cheaper.
? 【Have you compared items?】
We also examined Front stand which lifts J-TRIP's Stem, but we made Cowl this item because it seemed to be Fender because of narrow gap of Fender.
View detail
J-Trip Truly Quality
I also run Circuit so I bought it for winding a Tire warmer.
Immediately, I tried to use '14 MT-09.
RearMaintenace Stand (Cheap goods of 5000 yen) With Rear raised,
I tried raising Front with this product, but I was able to raise it easily.
When loading on the Transporter, you can load it on the Compact by overlaying it with the Rear stand.
Because Large is also Compact, it is not troublesome to store.
Although Rear stand feels a bit expensive as it is overflowing with items that can be used even in super-discount items
There is only this price, the quality of the finish is also high, it is a very easy-to-use item.
I will not remove Front fork, but I want to use Tire exchange or Tire warmer - - -
I recommend you to those who say.
View detail
worst
JAZZ 2 times Lift, boss Shaft broke. When I contact Minimoto, Parts on Single Body Reply without sale
It was a product that was not usable.
View detail
Convenient if there is one. And it can be used for a long time
CBR600RR (Racer) & CLEVERWOLF made Cowl
I am using it in the above-mentioned vehicle.
It is essential item for using Tire warmer in Circuit.
Rear also unified with STAND of Ethos Design. Plating is beautiful!
Because of the Cowl shape, the Upper Cowl lower part was slightly interfered.
Personally I do not mind Level.
Compared to J - trip like STAND,
Self-reliance is solid when folding without using it. (It can not open and fall)
I think I am a Good Point!
View detail
18in. It can also be used with Tire 's DREAM 50.
DREAM 50 has a Tire size of 18 in. So, Front-up Stand needs a certain height. With this STAND it is possible to detach Tire & Wheel with enough margin. Material : All Stainless Steel is a beautiful product. View detail
It is easy to use.
I used Roller to clean Wheel of Front, but it took a lot of power to turn Tire, but was troublesome, but J-TRIPJTrip Fork up stand makes it easy to use Lift up and is quite easy to use.
However, this making (Combination of just iron Pipe) I thought about this price.
View detail
I was happy to buy it.
It's user-friendly..
Until now Jack has carefully raised it carefully enough that it seems silly for me to feel stupid.
Indeed, it was good to buy !!
Nonetheless, just a combination of iron Pipe ,,, the price should be suppressed a bit more
View detail
Fits: MORIWAKI MH80, HONDA NS-1, MORIWAKI MH80, HONDA NS-1
Simple and easy to use.
I use it for HONDA's NS-1. With Simple it is hard to break without fine parts, so Stainless Steel makes it easy to drop dirt that it got hard to rust. I thought that it was a bit expensive. View detail
Convenient!
If you do not desorb Fork, you can do Front up with this.
Using Rear stands simultaneously will rise without difficulty.
With this, you can easily perform Caliper cleaning and Wheel desorption.
You can use it on almost all vehicles.
Because storage also enters between Rear stands, it is good not to take a place.
View detail