Reviews
Cospa best
It is easy to lock and the mounting strength is Firmly fixed, unmatched by other companies. View detail
No worry about falling off.
There is no sign at all that the 120km/h section of the New Tokyo-Nagoya, the Decoration bumpy road, or anywhere else you might fall off.
Vibration absorption capacity is also very high.
I have tried a few and they are by far the most secure in preventing drops, and if you are really worried, you can easily lock it with Lever.
It is very easy to use as it is easy to connect Charger.
The only complaint I have is that it is difficult to clean because dust tends to accumulate in the groove where it is fitted.
Also, some people have a problem with the way it looks. (Depending on Motorcycle) It may seem a bit lumpy.
View detail
Easy to use
[How is it used?
I chose to install a new Smartphone Holder on my TouringMotorcycle and ultimately ended up with this product.
Anything as long as it's cheap!" I am very happy to be able to do this, And not too much of Plastic's cheap stuff, either." For me, I'm a bit of an either/or kind of guy. That's it! It seemed like a good idea.
Also, my phone has many buttons on the Right side, so I could not use the type that is inserted from the side, so I chose the type that is fixed at the four corners.
Was the one you received as per Image?
I chose Black and it was just like the Image.
How was your experience with it?
First of all, the Included Parts:are substantial for the price.
There is a diameter conversion rubberretc.Pattern and it is not difficult to install.
When the middle Button is pressed, the four corners are Fit to the phone.
Release is Quantity:Pair (for Left and Right) The only thing you need to do is to press the "+" and "-" prongs, so everything can be done with one hand while doing Gloves, which is easy.
[Points to note]
Make sure it is firmly secured before starting.
How did it compare to other products?
I had been using Chinese several hundred yen ones, but I felt they were well thought out with good strength and ease of use.
【Review】
I used to think that KaEdia was cheap or bad, but when I bought it this time, I got a good impression of Included Parts:, usability, etc.
As a smartphone mount, I have no complaints.
View detail
Easy.
Large is just right.
I change equipment from time to time, and it is useful because I can exchange it easily.
View detail
Solid, compact, and unobtrusive around the handlebar
The SMARTMonitor has a growing selection, but the KaEdia KDR-D21 is characterized by its compactness, versatility, and high quality. 4.5-inches screen is smaller than a Smartphone, but it is recommended for those who want to refresh the handlebar area. The 4.5-inches screen is smaller than that of a Smartphone.
Installation is easy
Simply connect the power supply (Red and Black) to the Battery and the Attachment power supply (Yellow color).
All that remains is to connect the front and rear Camera and GPS to the Body (Monitor) to complete the SMARTMonitor equipped with a driverless camera.
There are four cords coming out of the Body, but they are soft and not difficult to maneuver.
The connection to CarPlay seems a bit slower than other models, but so far there seems to be no concern about disconnection after a long drive. Also, there is no such thing as losing direction when turning such as UTurn so far.
Since recent CarPlay includes meeting tools such as Teams and Zoom, it may be possible to do things like Touring while talking with multiple people instead of Income connection.
DriveRecorder is generally called highly functional, with beautiful images, and by using the KaEdia application, you can obtain sufficient information even with a Smartphone.
The app is stable in normal use, but in my environment (iPhone) the app crashes when setting up Camera. I hope this will improve in the future.
I have a Handlebar Brace (KDR-HB2) on my CB200X, so I put SMARTMonitor on it.
The company is also a well-known manufacturer of Smartphone Holders, so the product comes standard with an anti-vibration function and seems to have no durability issues.
This was my first experience with the Tire Air Pressure Check, but I was able to Pair it by removing the Pairing on the DeFault and re-installing it again. If it does not work, you may want to remove it from the Valve and reattach it again.
SDCard is not included, so it is recommended that you obtain the necessary Size's first.
Tests before connection can also be performed by feeding power to the USB-CConnector located next to the SDSlot.
(I know it's hard to use USBConnector when it's on-board)
Overall, the quality is good and the features are adequate for the price.SMARTMonitorQuantity recommended for those who are looking for a Compact screen.:Set
View detail
Excellent workability
Best quality as Smartphone Holder. A product with no complaints in terms of retention, security, and workability. View detail
Better than the previous MODEL.
Purchased due to Motorcycle expansion.
It felt more solid (sturdy) than the previous MODEL.
Smartphone is also securely fixed, so you may not need Rubber's Belt?
Don't worry, even an amateur can install it easily.
View detail
Smartphone Holder is the best!
The fit is so good that you don't feel the anxiety of saying your phone is going to fall off. View detail
Easy to use
It is convenient to attach a phone with One-touch. View detail
Highest & High
The product was satisfactory for the Large change, as was the reputation. View detail
To fix your iPhone
Purchased to install on Handlebar
Large and well fixed just right.
View detail
Used in Touring!
The handlebar of my YAMAHA NMAX155 is not bar-spec, so I have installed KIJIMA's Handlebar Mount Bracket (purchased from Webig before). I purchased the 90mm Type because I thought that the 90mm length would work well for the reasons that it would not overlap with the meter, my line of sight would be on the same level as the side-view mirror, and I would need the same level of distance as the side-view mirror to prevent presbyopia. Considering the vibration, is this length the limit?:After repeating the setting process of setting and checking the line of sight several times, and after confirming the setting after an actual ride, the decision was finally made. There was no vibration or shaking due to impact to the extent that I felt discomfort. I don't drive while looking at my phone, so I only look at it occasionally, but if the road surface conditions are good, there doesn't seem to be much blurring. View detail
I used it in Touring!
(1) Charging
I am using an AQUOSwish2 budget phone. Wireless charging. There is no functionality; the battery is charged using a USB cord. Some Impressions from other companies state that Wireless charging gradually depletes BATTERY even when running while charging. in the TEST run, charging from the USB port of the Shuriken is about 1 hour from 56% to 96%. In the real Touring, the battery stays at 100% all the way while charging and running with Gugu Luna Bi working while charging. Maybe it depends on the phone model, but I think charging using the USB port is better.
USB cord
The Type C connector has a narrower and deeper entrance to prevent waterproofing, so the Type C connector normally sold cannot be inserted because the plastic part is too thick. The Type C used for smartphones was not usable. I wonder if it is possible to use a thin one. I purchased the 15cm Type OEM Product from KaEdia. The length is also unobtrusive. If possible, I hope that Mr. WeBig will also carry this product.
(3) SAEConnectorCap
The SAEConnector on the Body side has a Quantity:Set, but the SAEConnector from the power supply section has a Quantity:It is not set. I personally do not like it because when the Shuriken Body is removed, the SAEConnector part on the power supply side is exposed. I bought it from CaEdia because it is not a car accessory dealer. ring size does not go through Fuse, so it is fixed near the SAEConnector part to the extent that it can be moved inHemp palmock (Tie Wrap). Normally, caps are connected to each other to prevent dangling. I hope Webig will carry this product if possible.
SafetyBand
This is Quantity on your phone.:If you don't Set it, it is playing with it and it makes a low, light sound with vibration. I feel that Band is too powerful when I use it, but even if it is troublesome, Quantity:It's better to set it. Strong impacts from rough surfaces can be tricky.
5) Feel of use
Quantity:When you set, you have to press the middle Switch with your phone, but you have to get used to it just for the simple task. It feels awkward at first. When you remove it, you have to squeeze the bar on the SIDE, and it does not feel bad. The color of this bar is like silver. If possible, I would prefer the same glossy black color as the body.
View detail
Strongest Smartphone Holder
It's been in Review for about a week since I received it, but the installation is
I think Wiring is easy if you are familiar with it, but I think it is a little difficult for those who don't know the Wiring system. I am using an iPhone 13, and although it charges, the phone gets very hot.
The battery seems to be charged and there are no problems, but considering the price and ease of use, I think it is a good product.
View detail
Purchased to change cell phone location.
Simple, looks sturdy, easy to see my phone. View detail
It doesn't feel right!
When I received the product I was excited by the high quality box. When I started to install it and tried to hold my phone before, I couldn't fix it effectively. My Android was a little small, so I couldn't get it to hold properly. When I was about to give up, I found a band for fixing in the Case. I thought I could fix it somehow with it, so I started to install it. The installation was successfully completed, but I can't shake the inconvenience of using the Band every time I use it. Well, it can't be helped if you think about the fact that the phone doesn't come off. View detail
Easy to use
It is good to be able to fix it firmly with One-touch.
I think the price is reasonable.
View detail
Instead of RAM MOUNTS
I decided to use RAM MOUNTS for another car model, so I looked into buying another RAM MOUNTS.
The price had gone up quite a bit and I was Biggly. So I bought it instead.
The GSX-S750 originally had a large diameter handlebar, but we were able to accommodate it with a rubber seal.
Release is also a Quantity:Set is easy, fast and reliable and I am satisfied.
Kaedear, you've been coming on strong lately. I have high expectations for the future.
View detail
Dantes easy to use inexpensive smartphone Mount.
I have this on my ZrX1200 DAEG. I have used other Manufacturer's Smartphone Mounts, but I think this one is the easiest to use. It locks by itself when I press the phone against it and the release method is easy to understand, so I even think I will replace it with this one when the other Manufacturer's Phone Mount breaks. I am satisfied with the price and functionality. View detail
Opening Ritual
It is quite good.
The RamMount you are looking for in the Mount at 1InchBall is
I can't deny that it already feels old-fashioned nowadays, like dropping your phone.
Ka Edia was selected.
CaEdia has many different types in terms of shape, but other models are not so good.
It didn't feel right and I chose this one.
View detail