Reviews
Nicest brake lever I’ve ever bought
I was able to customise the colour choice for the lever, body & adjuster to match my bikes asthetic. Upon mounting, the fit is very tight, be sure to apply a little grease to the section of the lever that fits into the brake lever housing. Once fitted, I have found there to be negligible wobble of the lever in the housing. The lever pulls fine & the adjustability is fantastic. I highly recommend this & the accompanying clutch lever to anyone seeking a quality & attractive full length lever set. View detail
LED License Plate Lamp was broken.
[How is it used?
The LED License Plate Lamp that came with Active's Fender Eliminator Kit was cracked, so I replaced it.
License Plate LightSince the price is almost the same as the Single Body one, I bought this one.
Was the installation difficult?
If you can do wiring, it's easy, but if you don't have the tools, it's not so easy.
How was your experience with it?
The black resin on the outside of the License Plate Light is so thin that it easily cracks when tightened even a little too hard. It is too thin, so I wish they had made it a little thicker or made it from gold.
[Included Parts:were they on?
Sticker、with Clip
[Opinions and requests to Manufacturer
I don't understand why License Plate LightSingle Body and License Plate with Bracket are almost the same price.
View detail
Vibration reduction
[How is it used?
Was the one you received as per Image?
just as one imagined
How was your experience with it?
Good, almost as expected
[Points to note]
Must check the length and inside diameter of the handle you are using
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Required when replacing LED BlinkerHolder
[How is it used?
When replaced with Active's LED BlinkerHolder, the Holder with the OEM Blinker Bracket is no longer needed.
The installation is fine with Bracket as it is, but it leaves unnecessary holes and does not look very good.
Was the one you received as per Image?
The packaging is easy to use, with minorSmall scratches, but no problems with use.
Was the installation difficult?
It is very easy with tools.
The LED License Plate Lamp is made of resin and can be easily broken if tightened too strongly.
It can be broken unexpectedly easily, so be careful, especially if you are a strong person.
How was your experience with it?
Refreshing around the Rear more.
[Opinions and requests to Manufacturer
If you put a Holder, LED Blinker Holder, with Reflector, RearCamera Bracket, License Plate, … and many other things, it will be very thick.
At least Reflector is the same bodyQuantity:I would like to have something that can be attached with 1pc.
View detail
Fits: HONDA CB1100, HONDA CB1000R, HONDA CBR1000RR SP, HONDA VFR800F, HONDA VFR800F, HONDA CB1300ST, HONDA CB1300SF, HONDA CB1300SB, HONDA NC700S, HONDA NC700S, HONDA NC750X, HONDA NC750X, HONDA HORNET900, HONDA CBR900RR, HONDA CBR1000RR-R FIREBLADE, HONDA CBR1000RR, HONDA CBF1000F, HONDA CBR1000RR, HONDA CB1000SF, HONDA CB1000R
No slipping, easy ankle hold
OEM footpeg was replaced because it was slippery on rainy days.
Thanks to the Knurl process, it feels as if it bites into the sole of the foot, and the feeling of operation is increased without slipping at all.
I am very happy with the new ankle hold.
The pin for the angle adjustment is thin, and I am a little concerned about whether the hole on the receiving side will widen or the pin will break, but after running about 1000 km, there is no wobble and the Large seems to be strong.
It was nice and stable when standing.
View detail
Quality and design are good! Adjuster's Accent color is cool!
Texture is good!
It is easy to grip and the Adjuster can be set in detail!
This Adjuster is very cool, matching the GSX1300R HAYABUSA's Accent color Red.
Installation can be done with an 8mm Wrench, but the brake hoses may get in the way when installing.
But if it was a little better, it could be installed by an amateur.
View detail
One point color adjuster is cool!
Model 3 GSX1300R HAYABUSA is an Adjustable type because it has a Hydraulic Clutch.
Please note that the product image is of Wire type Type and the Design is different. (I am glad that I was betrayed in a good way.)
The color of Dial is very cool with Accent color.
Not only is it easy to operate Adjuster, but it can be adjusted in detail,
We were able to find the BEST position for the hand.
Good purchase
View detail
Not well made for the price.
[How is it used?
For ZX-6R G type.
If you use Fender Eliminator, you can't add Side Back because the Blinker is in the way.
Since I sometimes use it for Camping, I replaced it with this product which can hold the protrusion.
Was the installation difficult?
For Kawasaki cars, the Blinker is Coupler type.
This product cannot be attached as it is, so wiring processing is required.
Since I did not want to modify the wiring on the vehicle body side, I purchased KITACO's Kawasakifor VehicleBlinkerHarness and installed it on this product.
However, the space under the Rear Sets is limited and the resistor generates a lot of heat, so we did not use the resistor and replaced it with a blinker relay that supports LEDs to prevent high flasher. The Front has no problem even if the Valve is left as it is.
It is very easy if you have knowledge of the Wiring process, but if you do not have the tools, you may want to leave it to the store.
How was your experience with it?
There is absolutely nothing wrong with the functionality, but Wiring is Quantitative:Pair (for Left and Right) It sticks out from both ends and is a bit… spec. that can be seen in full no matter how you look at it.
It is a pity that the price is so high for an LED light, about 16,000 yen, but there is no attention to detail or consideration for the details.
[Included Parts:were they on?
Includes resistance, Tie Wrap, Clips, etc.
There is no Instruction Manual, but there is a Wiring diagram on the back of the box.
[Was there anything that disappointed you?
For this price, I would have hoped that Wiring would have made it a little easier to hide.
If you want to be picky, I think Wiring would be Refreshing to use a different LED Blinker.
[ITEMS TO BUY TOGETHER
・Electric Works Pliers、Bullet Terminal
・KITACO Kawasakifor VehicleBlinker lampConversion Harness
View detail
perfect lever
It's perfect. The brake and clutch lever can be adjusted in advance, and the finish is also perfect, providing a smooth curved line and the air holes are drilled, which is expected to reduce resistance slightly. The foldable part is thought to be useful in the event of an accident. The color is also neat. do ------------------------------------------------- --------- It is perfect for brakes and clutch levers in advance, and the finish is also perfect, providing a soft curved line and a crooked air hole, which is expected to reduce the resistance slightly. do Powered by Google Translator View detail
Fits: HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SB SP, HONDA CB1300SF SP
EXACTLY installed.
CB1300SF (8BL) I installed it in
It was possible to install it without any difficulty without machining due to its high accuracy as well as the absence of BALI and other parts belonging to Gold.
The installation instruction manual was also included and was satisfactory.
View detail
Banjo bolt with Wiring hole
I purchased this bolt because I am going to change the pitch of the banjo bolt to change to a Brembo caliper.
The surface treatment of Anodized was also well done, and even when Torque was applied with Wrench, there was no color flaking of Anodized and it was finished beautifully.
The hexagonal head has a hole for wiring to prevent loosening and was wired with 0.8mm Stainless Steel Wire.
Circuit runners will also be able to use it with confidence.
View detail
Equipped with VST 250 without adjustment!
Used for DL1000 V-STROM250Custom.
I heard that it is usual to purchase and adjust washers and bolts separately for external bar ends, and I was worried about how the V-Stroke would be installed due to the combination of the Knuckle guard, but to my surprise, I was able to install it beautifully by simply replacing the body.
Bolt, Rubber, and Spacer are still from the OEM and the ones that came with them are left over.
Single Body is neither heavy nor large, so there is no vibration reduction effect, etc., but it is not worsening in any way, so it is a sufficient recommendation for the purpose of dress-up.
View detail
Stylish around the Rear (Joy)
I was looking for a Fender Eliminator Kit that can refresh the rear area of the car, and I bought this product because the Active Fender Eliminator Kit looks much better with the Blinker (sold separately) installed, and it requires no special modifications. I bought this product because it looks much better with the Blinker (sold separately) and does not require any special modifications.
I was able to do the work by watching other people's work on Youtube and the Service Manual, in addition to the Instruction Manual that came with the kit.
I modified the Harness to fit the Kawasaki car separately so that it can be popped into the OEM Coupler that others have done on Youtube. (about 900 yen) and is about to process Bullet Terminal to Active's Blinker.
Since I have only a beginner's level of knowledge, it took me a whole day to convert it to a Fender Eliminator. What took time was (1) removal of body parts, (2) processing of the optional Blinker, and (3) restoration of the car body. If you are familiar with the process, you can probably do it in about 3 hours.
I'm quite happy with Active's Fender Eliminator Kit, replaced by Blinker ^_^.
View detail
Fits: KAWASAKI BALIUSII, KAWASAKI ZZR1200, KAWASAKI ZZR1100D, KAWASAKI ZX-11D, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR400, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Ninja 400, KAWASAKI Ninja 250R, KAWASAKI Ninja250
Essentials for High Solo replacement
POSH Faith Posh Face:031567-K1 Smooth Slim Line High Throttle Kit We selected this product because we installed a
Since it is model-specific, I was able to install it without hesitation.
The texture is the same as the OEM product, so I use it without any discomfort.
View detail
Active TMR Throttle Cable for Yoshimura TMR Carburetor Type 3 (steel mesh)
I bought this Type 3 Active TMR throttle cable with steel mesh outer layer to match with the overall look of my bike (1988 suzuki gsx-r750J slingshot) with the high-polished frame and swingarm and parts. it really goes well with the Active fast throttle (silver) and the push and pull function is very well defined. There is no difference between the push and pull cables, i bought the same cables for both the push and pull functions. Active do not sell separate cables for that. For those who are unsure, please go ahead to buy the same cables for both functions! highly recommended View detail
For Suzumbo
Szumbo is bad.
I bought it because it is difficult to bleed air out of the suzumbo.
View detail
The Handlebar area will look luxurious!
The one point logo looks cool. View detail
ActiveSub-frame
It is so easy to bank that even a layman can understand it.
Timing to bank the Motorcycle itself allows it to fall over in a straightforward manner.
View detail
Brake fluid exchange strong helper
First attempt to replace Fluid in Grom and YZF-R1. We were anxious to replace the Fluid because it is an important safety part, but we did it carefully. This tool is efficient because it uses a syringe to force out the Fluid remaining in the line. View detail
KATANA High Solo
Introduced to KATANA. The attached Grip is a little stiff. The feel is fine. View detail