Reviews
Fits: Others X-Fourteen, Others GT-air II, Others Z-8, Others NEOTEC II, Others J-FORCE IV, Others J-Cruise II, Others HORNET ADV, Others RX-7X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VZ-RAM, Others CT-Z, Others SZ-G, Others F-17, Others AERO BLADE V, Others KAMUl-III, Others SHUMA, Others RYUKI, Others EXCEED
Installation is quite difficult.
This is a type of anti-fogging Seat that is not a pin lock but a stick-on type.
The ARAI CT-Z Pin Lock Seat I am wearing is missing (maybe it is an old MODEL and is discontinued?). I am looking for a new pin lock seat for my ARAI CT-Z.
This is why we chose this one.
The effect is decent.
The Shield is attached with adhesive resin that surrounds the Shield, but positioning is quite difficult.
I can re-cover the surface, but I don't want to leave fingerprints on it, so I want to do it in one shot if possible.
There is a pattern that can be used as a guide, but it is quite difficult.
The installation itself is easy, but you need to prepare properly. Be courteous and bold." It is recommended that you stick with it.
Therefore, it may be suitable for dexterous people.
View detail
Summer Helmet
I wanted a sub helmet for summer and was looking for something good when I saw the video of Ninomiya Go Large.
I was attracted to this product because it is reasonably inexpensive, the functionality and quality are fine, and the anti-fogging can be obtained by sending a Postcard, which is a very good value.
I have been using it for a year and a half, and it is a situation where I love it more than the main mission because it is an easy-to-use Helmet without Habit and can be worn easily.
If this is your first time buying a Jet helmet, I highly recommend it.
View detail
Fits: その他 GT-air II, その他 Z-8, その他 NEOTEC II, その他 J-FORCE IV, その他 J-Cruise II, その他 VZ-RAM, その他 CT-Z, その他 SZ-G, その他 F-17, その他 AERO BLADE V, その他 KAMUl-III, その他 SHUMA, その他 RYUKI, その他 EXCEED, その他 AVAND II, その他 A-FORCE RS, その他 G-FORCE SS, その他 FF-COMFORT, その他 A-FORCE RS JET, その他 G-FORCE SS JET
dull
I've tried all kinds of anti-fogging Spray, applying it before riding, during the ride, etc., but in the end it still fogged up.
I bought this product this time and I am very surprised that it doesn't fog up.
I've had this fog Win for so long that I don't think I would have ever needed to buy an anti-fog sprayetc.
When installing, clean and dry the Shield and carefully install it so that no Dust or Garbage can get in between. Surprisingly, it was easy to install.
I've used it every day for a while, morning to night, without the anti-fogging Spray.
Areas with fog WIN do not fog up at all.
I'm going to keep using it and see how durable it is.
View detail
Interference with M30 Clear shield
I used it on my M30 Clear shield and it interfered when raising the Shield up.
I thought I had pasted it too far up, so I tried pasting it at the Limit where it interferes with the bottom, but it interferes with the top again, and it opens to open, but gets stuck.
I thought it was Large sturdy because it managed to open, but the adhesive on the stuck part stuck to the Shield and Helmet and left marks even after wiping.
It is too much of a quandary, so I cut off the part that had adhesive on it due to interference and used it once, although the anti-fogging performance will be reduced.
Clear shield does not remove stains and I am thinking of replacing it.
It really sucks. I want my money back for Gold and Clear shield.
View detail
Used on a Simpson DiamondBack. It doesn't fog up.
[How is it used?
Used for Simpson DiamondBack.
Purchased this one because Pin Lock Seat is not available.
Was the one you received as per Image?
There was no problem with the image as it was.
almost [Color] Clear, but it looks like it has a little bit of color when you put it on.
How was your experience with it?
As for the anti-fog feature, it is very good.
It was comfortable to use.
As for visibility, the rim is inevitably in view.
This is somewhat concerning in Simpson, where even free visibility is poor.
It is necessary in winter, but it is better not to have it in summer.
I own another Helmet from WINS and have been using it for about 3 years for commuting.
About halfway through the second year, the surface of the fog WIN deteriorated and the visibility became finely wavy.
Depending on the frequency of use, it may be advisable to replace them once every few years.
Adhesion seems fine and has not peeled or fogged up.
[Points to note]
Since it is a universal product, it is slightly smaller than the Shield.
Given the large size of Simpson's Eye Port, this may still be the limit.
If you put it on the upper limit, it may interfere with the opening and closing of the door, so it may be better to leave a little room.
How did it compare to other products?
Pin Lock Seat is also used on another Helmet.
While new, I didn't feel any superiority between Fog Win and Pin lock.
I thought the durability of Fog WIN seemed to deteriorate visibility more quickly.
Pin lock also had a gap early on and sometimes fogged up even after adjusting the Pin, so I can't say for sure.
Point and hang of installation
If you put it too high up, it is prone to interference.
[ITEMS TO BUY TOGETHER
Shield without pin lock support
[Opinions and requests to Manufacturer
I would appreciate it if it were cheaper so that I could easily replace it.
View detail
Difficult to detach and obtain
The base is held in place by a magic tape, but it is so far back that it is difficult to remove and must be pulled to the point of tearing.
As is the case with all HelmetParts these days, it was hard to get them in stock and I had to wait more than 6 months for them;
View detail
Lightest. was felt to be the strongest.
I was looking for a lightweight helmet and came across this one for a MONSTER rider (comment comparison is with GT-Air).
Good points:It's just so light. It is so light that it makes me uneasy.
Design is good. Especially because I drive a MONSTER.
The Inner Visor allows glasses wearers to deal with harsh sunlight and backlighting.
Concerns (since there is nothing bad about it)
Shield is thin, distorted, and the midway stop of all openings and closings is lax.
When I vigorously lower the Inner Visor, it rubs the tip of my nose. (Not that I have a high nose)
The obi (woven sash) of the chinstrap is cheap (because it is thin)
Where I was concerned.Wind Cutting sound is quite audible (I can hear the neck well). No instability at high speeds (pulling and wobbling due to wind pressure).
As a recommendation, please Fitting once. The Foot feeling is different from other famous companies in a good way.
View detail
Necessary and sufficient.
I don't need the call function, so I use it for Navigation for Touring in combination with Elecom's BluetoothReceiver.
I tried playing music, but you can hardly hear the bass from Base or Bus Drum. Not for those who are looking for sound quality.
I also tried Setting on X-ROAD of the same Manufacturer, but I felt a little pressure in my ears. Instead, I tried SHOEI's HONET ADV with Quantity:When I Set it, I hardly felt any pressure.
"For now, just listen to your phone Navigation's directions and ignore the sound quality and just listen to the music!" I think it is a good cosmetic product for those who want to use it.
View detail
Light and not bad quality.
It was good point
*Chin guard can be mounted separately to provide a full face with Jet visibility and is easily removed
It's not as stiff as you'd expect, but it's better than nothing, and when used with the Neck warmer it keeps the cold air out.
*The interior's rather solid.
*Design is cool
*Register your product and get a free Pin Lock Seat!
A bad point
*The Shield is quite hard to open and close.
*It's also pretty hard to install.
*Ventilation is not nice.
*When the Chin guard (sold separately) is installed, the mouth is quite suffocating because air is considerably caged (There is no Ventilation of the mouth)
*That makes it quite cloudy. (That's why I'm so happy with the Pin Lock Seat)
*Although there is a Speaker mounting space, the groove is shallow, so it interferes with the ear unless it is thin.
View detail
Pin lock.
I use AGV K5 S.
Shield was just getting WoundWound.
Due to unavoidable circumstances (laughs)
I scratched the shield on Asphalt surface and replaced the shield.
I didn't get the pin lock because I didn't know when it would be delivered, so I installed the one I've been using for a while, but hmmm, the pin is in the wrong position and I can't reach it (lol)
So I decided to go for the fog-in, which was recommended by Seiho.
There's an adhesive side to stick it to.
With pin lock, it gets more and more subtle (laughs).
I feel like this is better. Mm-hmm. (laughs)
I just put it on and will try it again and report back on how it works.
View detail
very good
I've installed it on my OGKCUBtShoeoma.
It was a Review like Pin Lock Seat itself is not good or Pin Lock pin is broken.
I am also satisfied with the fact that the anti-fogging effect is preeminent and can be reapplied if it fails.
View detail
It was cooler than the picture.
I thought it would be Lame.
It is a large thing that it is not overlooked in the mountain and the night, etc. though austere color was good, and it is bright color.
White is Blue, if you want to buy a new one, because it has been White for a long time.
Blue on Yamaha Blue.......
Ventilation is good, but it would be nice if the shield could be opened a little bit, so I deducted one point.
I think the shape of the head and the Size feeling is the same as a domestic Helmet in general.
(From OGK KAMUI2.... I wonder how many years I've been wearing it...)
Visor for city driving is not convenience equipment, it's safety equipment.
I think the reduction of fatigue is the most important safety.
View detail
It's hard to wear one for long periods of time without buying one!
I decided to buy it based on Design and price and also reading the Reviews.
The price and design is good as it looks, but the comfort is not good. I went on a 150km one way day tour, but after an hour of using it, my head started hurting and it became a large strange touring.
After I got home, I went to a 100-yen store and bought some thin Cushion material. (Floor mat) I bought a target and processed it and put it on the inside.
I'm struggling to find a way to improve the comfort and love it.
View detail
improbable article
I bought this to replace the interior of my Helmet as it was getting damaged!
I'm currently using the L Size, but I personally prefer the Small size, so I bought the M Size this time … but
When the product arrived and I tried to install it immediately, the place where the chinstrap goes through on the Right SideCheek padReverse side was sewn in with a sewing machine and the hole was not penetrating, so I could not put the chinstrap through. It was defective
The quality is unbelievable in Japan.
I am currently inquiring about a return or exchange, but after 5 days, no response, Web!ke! 'We'll deal with them in turn' … do you get that many return enquiries?
View detail
Parenthesis is good, but...
The texture and functionality are good, but it's very small.
I wear it with a Shoei Helmet XL, but the entry is too small anyway.
It does go in, but I thought my ears were going to tear off when I put it in.
When I wore it, it didn't hurt my temples or anything, but my cheeks were chapped.
The mouth is quite roomy and comfortable.
But anyway, the entrance is narrow.
So I went with Minus2.
The design is good for parenthesis and the atmosphere changes depending on the visor, but the mouth of the head is good.
Personal Thoughts.
View detail
Forcibly connected to DAYTONA's DT-01
First of all, it is a review of this product alone.
Since I only use Navigation, I don't really care about the sound quality.
It sounds relatively neat.
(At least it doesn't sound like a cheap crack.)
At high speed, the Wind Cutting sound becomes difficult to hear because of its Large threshold, but that's not limited to this speaker.
However, Cable is still frustrating for wired.
Especially when you use Extension Cord, the Reel in the middle swims in the wind.
Clip is attached to Reel.
However, if the Handlebar contains a Quantity:When I try to connect it to my Set phone, it's not long enough to stop anywhere in Clip.
So I didn't use it much after all.
Now I am using it by cutting Cable and modifying it to be able to connect to DT-01.
The reason is that Helmet wears a relatively snug Size and the ears interfere if it is not this thin. The thinness is very attractive.
View detail
Good to be able to adjust Size
The good thing about the WINS Helmet is that you can change the interior. I also changed the Size on the head and cheeks to make it the best. View detail
The durability of OEM Product is too low!
The Helmet is supposed to have a useful life of 3 years, but it fell to pieces in about 2 years.
When I bought it, I thought it would fit from the shape, and X-ROAD was described as a compatible model in Package though X-ROAD was not in the compatible model in the Site of Webig.
It's an OEM Product, so it's not as good as it could be.
View detail
Poorly made.
My current Helmet Cheek pad is too tight, so I replaced it with the Size XL.
This is for the A-FORCE RS JET, but can also be used for the G-FORCE SS JET.
The Helmet's ShellSize is the same, so all sizes from S to XL can be installed.
The Cheek pad I bought was not well made.
It's supposed to be fixed with 3 Button and Magic tape.
The position of the Button is slightly off (about 2 or 3mm), so I had a hard time fitting the Button.
I made a little wrinkle, and was able to install it somehow, but it is very regrettable though it is Helmet of a domestic manufacturer.
View detail
Sound quality is good. For people who really listen to music and other things wired.
The aim of this product is to buy a compatible Microphone and Quantity:The Set was where you might be able to make line calls through your phone and so on.
As a result, the communication delay and volume did not go up well, and I gave up. As a result, it was not useful.
However, the sound quality is good as the performance of the product Single Body, and the device that Jack can make a difference. (Smartphones and Walkman.) You can enjoy music on the wire if you have
If you don't need a communication device such as Income, and if you prefer wired instead of wireless, I think it's a good buy.
But I'm worried about whether to fix it to the floor or not, because it's hard to handle and you have to take it off from the device when you take off the Helmet. It is difficult to take off the Helmet when I take off the Helmet.
It is important to note that.
View detail