Reviews
Fits: HONDA CB1100R, HONDA STEED600, HONDA MAGNA, HONDA RC30, HONDA VF750C, HONDA VFR750F, HONDA Crossrunner, HONDA VFR800F, HONDA VT250F, HONDA XELVIS, HONDA VT250Z, HONDA V-TWIN MAGNA, HONDA VT250 SPADA, HONDA VFR800X, HONDA CB1100F, HONDA CB1100SF, HONDA CBR1100XX, HONDA X-11, HONDA CTX1300, HONDA ST1300
MORIWAKIOil Filler Cap
One of these costs just under 4,000 yen.
The texture is good, so I'm satisfied.
Recommended for casual One point
View detail
![[Exhaust System Repair Parts] Spring Long](https://img.webike-cdn.net/catalogue/10280/0a02-08709fh22_TS.jpg)
Spring
The swiveling design allows for installation without worrying about the angle at which it is mounted. Since it is silver in color, the silicon transparency seems to fit better than RubberBlack. View detail
![[Exhaust System Repair Parts] Spring Long](https://img.webike-cdn.net/catalogue/images/39993/18334-90877-30_01_TS.jpg)
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Stainless Steel
The rust-resistant stainless steel and silver color make the transparent silicon rubber attachment look not so bad.
It can be installed with a good feeling without straining because of the double-swing swing.
View detail
Sticker on Silencer
The Silencer Sticker had been removed and lost when I saw it after the first break-in period of about 30 km. It may have been something to be removed from the beginning. View detail
Fits: HONDA REBEL1100, HONDA REBEL1100, HONDA REBEL1100T, HONDA REBEL1100T
Long-established businesses do not disappoint.
The appeal of this product lies in the balance between design and performance/sound quality.
The exhaust sound changed to something else immediately after installation and at the end of the 50 km break-in period.
The powerful pulse of the TWIN was pleasantly resonant, and above 4000 rpm it was truly a roar, a numbing experience.
The low-mid range is definitely torqued up, but there is also a slight increase in vibration.
Installation is not too difficult if you have the right tools and the right knowledge, but the most difficult point is to remove the O2 Sensor Connector.
Two copies of the Exhaust Gas Certificate for vehicle inspection are included, nice attention to detail.
The price was a bit steep, but the value and enjoyment was as expected.
View detail
![[Exhaust System Repair Parts] Spring Long](https://img.webike-cdn.net/catalogue/images/39993/18335-90877-30_01_TS.jpg)
Fits: YAMAHA Universal, SUZUKI Universal, KAWASAKI Universal, HONDA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Stainless Steel Spring
I think the black of Rubber does not match the silver of Stainless Steel, but it seemed to take a long time to order the one without Rubber, so I bought this one anyway because it was in stock and the delivery time was fast. I bought this one because it was in stock and the delivery time was fast. View detail
Fits: YAMAHA Universal, SUZUKI Universal, KAWASAKI Universal, HONDA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Stainless Steel
I would have liked to have gotten the one without rubber, but it seemed to take a long time to order, so I bought this one with rubber, which was in stock.
Stainless Steel, swiveling, and this length seems to be a good length for use.
View detail
It doesn't look like a Seat cover.
good point
The dedicated seat cover I have in mind is an image that is loose in some areas, but this seat cover from MORIWAKI is so tight that it looks like it has been reupholstered.
Even on a 200 km round-trip touring trip, there is not a single wrinkle.
Cushion is also so-so.
Since Motorcycle is Black, Color:I like it MATCH with Gray's Seat.
A bad point
Seat is slippery
I usually ride my motorcycle in Denim pants for motorcycles, and they are slippery, but I don't mind.
However, I'm concerned about the windproof, cold-resistant, rustling Pants for winter because they are quite slippery.
View detail
Moriwaki skid plate
From genuine skid plate to Moriwaki skid plate black
There is no difference in functionality, but I liked that it had the brand name moriwaki on it.
Can be installed on Ja65 2023 model. -------------------------------------------------- -------- Moriwaki Skid Plate BLACK from genuine skid plate I changed it, but there was no difference in function, but it was good to have a brand name Moriwaki. JA65 can be mounted on the model in 2023. Powered by Google Translator
View detail
Fits: YAMAHA Universal, SUZUKI Universal, KAWASAKI Universal, HONDA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Stainless Steel Spring
Used to fix Exhaust System.
The Black Cushion has a poor balance in appearance, so I replaced it with a transparent one.
View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal, HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Stainless Steel Spring
It is purchased for use in Flange fixing of Chamber.
I thought it should be rust-resistant, and this Stainless Steel Spring seemed to be a good length, so I purchased it.
It does not look bad and seems to be well fixed.
View detail
![[Exhaust System Repair Parts] Spring Long](https://img.webike-cdn.net/catalogue/images/39993/0a02-08709fh01_01_TS.jpg)
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
Spring
I am repurchasing to use for Spring for Flange fixation in Chamber.
It is a single-neck swing, so it seems to pull at a good angle overflowing. Black is not bad looking, but it is not completely black. There are some areas where the color is light.
Is it easy to rust since it is steel? I would like to see how it looks for a while.
View detail
The colors, ...
Attached to the helmet along with the MORIWAKI muffler.
As you can see from the sixth introductory photo, the color is lighter.
So I put it on a Graphic-colored Helmet and the Graphic became transparent. (Photo:above)
If you are concerned about it, layer it with a single-color Base. (Photo:Bottom)
Good thing it came in a two-pack.
PS:A minor point:the cutline on the outer edge is partially gapped with the text.
View detail
The styling of the muffler was what sold me on the product
About quality and texture, I can confirm that the quality is great and that the material used is stainless steel for the pipe and stainless steel for the muffler, all surfaces come with a polished finish. About the feeling of use, The styling of the muffler was what sold me on the product and I am not disappointed with the exhaust sound either. A positive experience from making the purchase thru to using it on the bike. Products to buy together, This exhaust has also improved the appearance of the bike so a fender eliminator to allow the removal of the next ugly part would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the exhaust system was very easy due to the small number of mounting points for the exhaust and the easy acess to these mounting points on the bike. Everything from the muffler mount to the exhaust port mount lined up perfectly. Cost performance and comparison with other products, The pricing of the product was great. You receive a full exhaust system that is made using high quality materials and has high quality surface finishes. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
ChamberFlange Fixed
I purchased this product because it looked like it would have a good one-sided swivel for use in the ChamberFlange section.
The one without rubber was a little cheaper, and the one with rubber had a slanted cut edge, so I plan to use another rubber.
When pulling on the installation, it seems to be better to use a single swivel.
View detail
![[Exhaust System Repair Parts] Spring Long](https://img.webike-cdn.net/catalogue/images/39993/0a02-08709fh02_01_TS.jpg)
Flange Fixing
I am repurchasing to use for ChamberFlange.
It swivels, Black so it doesn't look bad, and the Hook on the Free one has some parts that are not colored.
It's not a pricey item, so it's not a bad idea. The color may peel off as it is pulled during installation, but for now, it is repaired and installed with Touch pan.
View detail
It was unexpectedly Small.
It is better to think of Large Thin Sticker as the main and the rest as extras.
I was going to use something other than Large Seal, but it was too small and I was at a loss as to how to use it.
I ended up using it for the Fork Guard. I think it looks great, but personally, I would have preferred it to be a bit larger.
From a distance, it looks like one point of Red, but it is small and lacks appeal. Well, let's say it's OK.
View detail
Used for Fork Guard
Fork Guard is White and I wanted to paste Sticker, etc.
I think you will feel no discomfort since you are wearing MORIWAKI muffler.
View detail
MORIWAKI's unofficial advertising vehicle.
The Fork Guard I bought off the rack is too White, so I decorated it with Sticker.
There is no discomfort because of the MORIWAKI Exhaust System.
As for durability, well, if it's cheap and lasts that long, it's probably good.
View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
MORIWAKI OEM Product
MORIWAKI LEGENDMONSTER S2Bean-jam-filled wafers (Monaka) The Spring that came with the product was replaced due to a broken Spring.
The length was optimal and the connection was secure.
I bought several bottles as spares and put them under Seat.
View detail