Reviews
Fits: KAWASAKI D Tracker 125
Even though the car model Bolt On.
I bought it because it is Bolt On for my car model.
Caliper's Screw is covered by Caliper's Screw.
I can't remove the Caliper Adapter.
I think Straight is a good choice.
View detail
Waterproof property is not good
I bought this for Repair because the original Fender Eliminator License Plate Light was damaged. The light shines well and the visibility is good, but the waterproof property is not so good… Large rainfall causes water to get in… For now, I use it with Duct Tape wrapped around it, but I think it would be better to use it for a long time by coking etc. View detail
Tank capPad
The texture is good but the detailed workmanship is not good. Holes are misaligned. View detail
Fits: BMW C400GT, BMW C400X, BMW C600 Sport, BMW C650 Sport, BMW C650GT, BMW C650GT, BMW F700GS, BMW F700GS, BMW F750GS, BMW F800GS Adventure, BMW F800GT, BMW F800R, BMW F800R, BMW F800S, BMW F800ST, BMW F850GS, BMW F850GS Adventure, BMW F900R, BMW F900XR, BMW G310GS
Made by Wonderlich, a trusted manufacturer
Made by Wonderlich, which is reliable but expensive.
It would be nice to be able to easily extract power from the back of the Heller Socket.
View detail
Fits: BMW S1000XR, BMW S1000RR, BMW S1000R, BMW C400X, BMW F900R, BMW F900XR, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250GS Adventure, BMW F850GS, BMW M1000RR, BMW M1000RR, BMW F900GS Adventure, BMW M1000R, BMW F900GS, BMW F850GS Adventure, BMW F750GS, BMW R1250R, BMW R1250R
It's made by Wonderlich, a company you can trust.
I haven't compared it to Chinese products, but I thought it was a sure bet since it is made by Wonderlich, a trusted name in the industry. View detail
ODBAdapter
Connect to SMART phone to see Motorcycle information. RPM, etc. View detail
Fits: Others , YAMAHA SR400, YAMAHA SR500
This is what you get if you shorten it.
OEM modified and installed on short fender
The holes in the Type 2 Fender do not match, so modification was necessary.
View detail
Is it a stock take-up Large sturdy?
Dec. 23, 2011 There is information that the Right Side does not match the screw Pitch.
The stock items are probably from that lot as well.
The person who purchased the same lot said that the holes are off by about 2 cm when temporarily assembled.
Manufacturer has informed us that it is not a glitch.
Hard to imagine, but perhaps 300 is different from 250?
View detail
It looks good!
NC42Rear suspension was leaking Oil and I couldn't afford OEM because it was too expensive.
The item received is clean with some SmallWound! 。
Installation was not possible because the Bolt under the Right Side interfered with the Exhaust System to remove the OEM! Others were completed Smoothly. The upper part of the Shock was not easy to install, so I applied a little Chain oil as a reference to others and it went in. Also, one of the lower side had to be tapped a little to fit the holes in the mounting position. Also, it was impossible to mount the pon, so I had to extend the overall length by about 8mm to complete the installation.
The ride is not bad, but it feels soft, so I will adjust it. I don't know about durability, but there seems to be no oil leakage and no initial defects.
View detail
scratch-resistant
I will put it on the area where it rubs. I hope it will be effective. View detail
Fits: KAWASAKI NINJA600R C1-10, KAWASAKI Z750GP, KAWASAKI Z1000R, KAWASAKI 1000GTR, KAWASAKI EN400, KAWASAKI Eliminator 400, KAWASAKI Z750FXII/III, KAWASAKI Z750FXII/III, KAWASAKI Z400LTD, HONDA GL1200 Gold Wing, HONDA CBX1000, HONDA CB900F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F
Magnetized, higher than OEM
I always use OEM, but this time I switched to KIJIMA's Magnet. We will see how it goes. View detail
Requires some getting used to.
Too thin and spoiled in Bell Hammer's Nozzle.
Is it for a little thicker Nozzles like CRC?
Or is it compatibility with the car model? (Used on deRaster400 and GSR250)
We used it twice and returned to the old method of working with the Vinyl bag to stop and pour.
It also takes quite a while for the lubricant to travel through the Hose and come out from below.
The price is something I would be willing to keep for a trial, so I think it is a good idea to buy one to try it out.
It has been on the market for a long time, so I am sure it is useful for people who are used to it.
View detail
Fits: HONDA Ape 50, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100
The APE can be found at ・・・・
I purchased this carburetor and installed it in order to prevent dust from being sucked into the carburetor while driving on the street, but the intake resistance was much greater than I had imagined. In addition, the carburetor protrudes to the Right on the APE, so the Rubber that stops the Net when the carburetor hits the thigh while driving is not able to be used.
Gap and before I knew it, Net and Sponge were gone. Now I am using Funnel with JAM's 3D Air Filter (Right Side Cover needs to be removed or partially cut).
View detail
It's all right.
I don't think there is any problem to use it, but the Adapter and the color of Hose are the same Manufacturer.
It's somewhat frustrating that it doesn't fit.
View detail
A little disappointed
They arrived in good time as usual when buying parts from Webike, I am a bit dissappointed the covers are not shiny and chrome looking like the picture, they are gray dull colour :( View detail
Fits: HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR, HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR
Made by POSH for safety!
I always used KITACO but this was cheaper so I bought it.
Compared to KITACO, it is the same as KITACO Large and seems to work fine.
View detail
 Exhaust Gasket](https://img.webike-cdn.net/catalogue/images/2902/1-h-vt250_TS.jpg)
Fits: HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CBR400F, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR750, HONDA CBX750F, HONDA VT250 Z, HONDA VT250 Spada, HONDA VTR250, HONDA VTR250, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBX400F, HONDA CBX400 F INTEGRA
4 pieces for 640 yen! It is a high-cosmetics product!
I was worried because it was cheap, but I compared it with the one made by POSH that I ordered with it and confirmed that it was almost the same.
I feel that the processing of the gaps in the Rings is rougher and more GizaGiza than posh, but I don't mind because it is something to be crushed and used.
View detail
First Red Pad with regular replacement.
Due to pad wear, the OEM Pad is replaced with a DAYTONARed Pad.
I used Golden Pad before, but this is my first time to use Red Pad because I felt like there was a lot of Damage in Rotor.
I don't know about wear resistance yet, but I feel that braking power is slightly increased over OEM.
I prefer this to the more intense effect.
Now we have to see how the wear resistance and aggressiveness to Rotor will be.
View detail
Fits: HUSQVARNA FC250, HUSQVARNA FE250, GASGAS MC250, HUSQVARNA FX450, GASGAS MC125, KTM 250XC-F, KTM 300XC TPI, KTM 250XC-W TPI, KTM 250XC-W, KTM 200XC-W, KTM 150XC-W/TPI, KTM 350XC-F, KTM 125XC-W, KTM 250XCF-W, KTM 300XC-W, KTM 300XC-W TPI, HUSQVARNA TC250, HUSQVARNA TC125, KTM 500XCF-W, KTM 350XCF-W
Improved Brake grip comfort
I installed it on my gasgas EC250 which I always use for forest road touring.
The OEM Brake lever did not give me a good supplemental grip, so I bought this lever to try it out.
Fit feeling of the fingers is good, and the feel when operating the Lever is very much improved.
Furthermore, the fact that the lever is foldable makes it difficult to break, which is good, and reduces the number of troubles during touring on forest roads.
The quality is good and I like the Large change.
The only drawback is that the price is very high.
View detail
Size is delicate for my Motorcycle.
The space under the Seat of VSTROM250SX is a little large, so I decided not to paste it. I ended up throwing it into the Rear box. I could have used a normal container if I wanted to. View detail