Reviews
Emboss process is good, but ….
Always use when doing this type of maintenance. Paper." I've been using a variety of "Turtle Wipes" for a while now, but this one has an Emboss finish, which makes it less fluffy to the touch, but it's hard to wipe with just one sheet. hellip; View detail
Desorption …
The description said it was detachable, but it could only be used in the detachable direction.
I was very disappointed that it could not be tightened, but since I was able to remove the Filter, which was tightened very tightly, and the construction of the product itself is solid, I think it is not so bad if you break it down.
View detail
Screw Cutter
I use the ratchet type for re-tapping screw threads that are out of alignment and for drilling new screw holes, because it is easier to use.
Although it is used only occasionally, it is useful in many ways to have 1 pc.
View detail
reliable Brando -- budget prices!! it is perfect -- it is -- ~.
reliable Brando -- budget prices!! it is perfect -- it is -- ~. View detail
reliable Brando -- budget prices!! it is perfect -- it is -- ~.
reliable Brando -- budget prices!! it is perfect -- it is -- ~. View detail
SIGNET:3/8DR T-30 hex-lobe-bit-socket product number: -- 22866 -- merchandise information goods detailed size:T30 -- tip outside diameter size (mm):5.52 screw-thread size: -- M6-7 plug angle (inch DR): -- three eighths. Socket Outside-diameter (mm):17
SIGNET:3/8DR T-30 hex-lobe-bit-socket product number: -- 22866 -- merchandise information goods detailed size:T30 -- tip outside diameter size (mm):5.52 screw-thread size: -- M6-7 plug angle (inch DR): -- three eighths.
Socket Outside-diameter (mm):17.8 overall-length (L1;mm): -- 49 axis length (L2;mm): -- that of 23 plug angle 3/8 inch DR -- KUSUROBU bit socket.
View detail
Since other goods were ordered, it was enclosure, but to the die length (600 mm) of goods, since the box was small, it was aslant put in in three dimensions so that distance might be earned. it was put in as it is without care of health by the box --
Since other goods were ordered, it was enclosure, but to the die length (600 mm) of goods, since the box was small, it was aslant put in in three dimensions so that distance might be earned.
it was put in as it is without care of health by the box -- a sake -- the place of extension of which the upper part breaks through a container box and it jumps out, it obtains even if the hole is also opening the lower part to the box, and it jumps out by a few -- it was .
Although it was satisfactory to the goods themselves, I got it to be better for the packing method to think considerably.
Although connection of improvement hope was carried out by e-mail, since it is nothing (correspondence of what happening after that if it sells, but not knowing), in news, it writes in here.
View detail
Socket for 1/4 of a forest road
I always enjoy forest road touring on my beloved HUSQVARNA TE250.
Since unexpected troubles occur quite often on forest roads, we always bring our own portable tools, but 3/8-inch tools, which are the mainstream in motorcycles, are heavy to carry.
This is where the 1/4Size tool comes in, but the Adapter also allows the use of a hexagonal Bit, making the tool lighter and more convenient to carry.
I really enjoy optimizing the tools I carry.
View detail
Easy to use
The fit is good and the gripping force is firm.
It is easy to work with because the tool does not slip and it is easy to apply force.
It is convenient to have during maintenance because it does not make your hands dirty.
View detail
Easy to use
It is possible to pull out the hose from the Pipe without any difficulty.
It does not damage the hole.
It is safe to use
View detail
It can be used normally
I bought it because I wrap Wire around Grip.
Other Manufacturers have similar products with varying prices.
This product can be used normally. I didn't think I needed a particularly more expensive product than this one.
It can firmly pinch Wire, and the movement of teeth is less rattling.
Wire can be cut quickly at the Nipper.
The ability to twist the all-important Wire and Spring's rebound was just right.
Work can be done Smoothly.
I can recommend it
View detail
It's good if you can use it.
I bought it, but it was not very accurate.
It is usable, but the rattles are Large.
I don't have any trouble using it, but the feel isn't rich.
It was not a satisfactory tool.
There is no problem in normal use....
View detail
New ModelGSX1300R HAYABUSAFull Exhaust System exchange was not able to use Exhaust pipe hindrance…
New ModelGSX1300R HAYABUSAFull Exhaust System replacement, I bought this product because I couldn't fit the CupType tool to remove and install the Oil Filter, but the Exhaust pipe was in the way and it didn't work. However, the quality of this product itself is excellent. View detail
No problem
I bought this tool because I don't get to use it often, but I needed it for Impact.
I was able to use it with no problems.
I've used SIGNET on other tools and it's a great cosmetic tool.
View detail
Reliable Brand
I bought it because I have used it on Other tools.
SIGNET is a great cosmetic company and the quality is very good.
I've never had a defective product.
View detail
Chain Adjustment Essentials
This is the tool I need to change the chain on my MONSTER S21200R. I asked the dealer for the size and he said it was T-60, so I checked the tool I had on hand, but Torque was only available up to 55, so I bought it. I have been using this tool manufacturer for a long time, so I am using it with confidence. View detail
Essential for air tools
When you install the Air Compressor in Garage, you'll need it to connect to Reel, and you'll be able to use it to get the Air Compressor to work It is a normal Coupling with no special features There is no special feature and it is ordinary Coupling View detail
It is cheap, I wonder if I can measure Torque for the time being
I think that there is a more expensive and sophisticated Torque wrench, but since it can be measured to 1 pc up to 100 NM, I purchased it as it would be better to finish with 1 pc for normal maintenance.
Certainly 100NM is used only when exchanging Axle Shaft or Tire, so I think it would be better to introduce one pc separately and introduce something that can measure the Torque value normally used for servicing, but amateur use Considering the frequency, is not this sufficient.
I think that it is worrisome to mention that there is a backlash in the Dial of the Torque setting and the finish is cheap points, but I think that I was glad I bought it.
View detail
I can not use it as it is
While removing the Oil seal of Susu Arm, I was working with Slotted screwdriver, but since some Seal did not come off, only Rubber part of Rip was torn, so I purchased it because I needed a special tool.
However, as you use it, the tip is a snake, so Seal will not catch it (Seal and Bearing were in close contact with each other) I could not remove Seal.
So using the sander to grind the tip of the tool made it easier to remove Seal.
If there is a gap in the back of Seal, I think that it can be used as it is, but in my case, processing of the tip was necessary.
View detail
Although it may not have a problem in using, but as a product I doubt
Products are sent and try opening Case.
Oil like lubricant dropped from Ratchet and it was dirty.
Plating of 13 mm Socket was also peeled off.
Sale I thought that the targeted items are something like this.
View detail