Reviews
The price is ….
It looks cool, but as with all RS parts, the price is too high! View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Tandem seatBelt cover
I chose gold for the Seat cover because I have a uniform color of gold. I like the texture and the high quality feel of the cover. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Choose a different Type
I was thinking that most of the Blinkers were Round Type and not face White, but then I found this one and bought it.
I found out later that the OEM went to the trouble of using bulbs even though they are LEDs.
So I bought LED Bulb from Mercari and Relay for LED. (OEM was not allowed to do this)
It was something that cost me an extra Gold.
View detail
Washer diameter is Small
I used a 25mm Spacer to adjust the angle of the windshield on my CRF250RLY50, so I used this washer when I changed the fixed bolt.
The OEMScreen Fixing Bolt has a 13mm diameter UrethaneWasher and the color is Black, so I purchased this BlackWasher, but the diameter is too small, so I am not sure why. Even if the color is different, I would rather purchase a regular Stainless SteelWasher to protect the UrethaneWasher, because I can choose various sizes.
However, this BlackWasher itself is a very good quality product.
View detail
Black stainless
When replacing the disc with a new one, the lock nut for fixing was replaced with this Stainless black one.
It is a little pricey in terms of the number of units used, but I am satisfied with the appearance because it is rust-resistant Stainless Steel and Black, which makes it look beautiful.
View detail
Reliable Brand
The blinker has not been replaced yet, so I will not be able to check the operation until it is installed. View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI V-STROAM650XT, SUZUKI V-STROAM650, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050, SUZUKI GSX-S1000GT, SUZUKI GSX250R, SUZUKI BURGMAN400, SUZUKI V-STROAM, SUZUKI GSX-S1000S, SUZUKI GSX-S1000
Buy ja59
I wanted to install a low thickness bar end on my ja59, so after removing the OEM bar end, I tried to install it, but it was not possible.
I think I can install it by cutting and shortening the bar end fixing part, but I think I will save it for another motorcycle this time.
I learned a lot, I couldn't install it, but the design is good and I am satisfied with the product!
View detail
Small ObjectsParts
These parts are useful if you keep them in your parts box. View detail
Importance of imple
[How is it used?
It is installed on a jc61 grom OEMHandlebar.
Dress-up and Suma Holderetc. installation purpose.
Was the one you received as per Image?
I love it so much that I Repeat it.
Was the installation difficult?
It was about 10 minutes.
How was your experience with it?
I am not sure if it is because I could not install it in the correct position this time, but it feels a little more jittery in my hand than before.
[Was there anything that disappointed you?
I made the mistake of buying it because all the impressions I saw said that 187mm was JUST the best for Groms, etc.
The jc61 is not 187mm and is more expensive, but the length adjustable Type is better.
With proper installation, the way Clamp fits is obvious.
I don't think it makes sense unless the face of the Clamp and the face of the Handlebar are Exactly aligned.
I will consult with Wallet and replace it with Posh's adjustable Type.
View detail
Fits: HONDA CBR600RR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
It did not work for crf250rally.
Purchased when replacing crf250rallyBlinker.
However, it did not fit the Front Blinker….
The fit is this way.
POSH Blinker Conversion Coupler Code Hondafor Front (18-19CB1300SF/SF-SP)
View detail
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF-SP
Purchased for protection in the event of a fall
I bought it in case of emergency.
However, the product I received was scratched and the plating was peeling, so I contacted the manufacturer directly to have it replaced.
I ended up removing it because I was worried that I would not be able to remove the Crankcase Bolt in the event of a fall.
View detail
Fits: HONDA MSX125 (GROM), HONDA MSX125 (GROM)
If Black.
I tried to find other products but there is no Black anyway.
I had no choice but to choose Gold, but Black would have been better.
Cut-out texture is nice and well made.
View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI V-STROAM650XT, SUZUKI V-STROAM650, SUZUKI GSX-S1000GT, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050, SUZUKI GSX250R, SUZUKI BURGMAN400, SUZUKI GSX-S1000S, SUZUKI V-STROAM, SUZUKI GSX-S1000
I'll think about it a lot.
This is the first time I have installed an UltraHeavy weight Bar End.
I thought the heavier weight would reduce vibration….
I have only ridden it a little bit, but it doesn't seem to vibrate.
I don't know how it will look when I get on the highway, but I wonder if it will be Large sturdy?
However, since it is heavy and large, it is thicker than the Handlebar, and I feel uncomfortable when driving it where it is different from the Handlebar.
The handlebar has been replaced with a handlebar that is up and narrower than the OEM handlebar, so I feel that the weight of the bar end sharpens the cutting angle when turning.
I hope I can get used to it and stop worrying about it, but if it bothers me a little, I will consider replacing it.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Cosmo
Note that the OEM LED Blinker has a Large Coupler and will not fit through the wiring hole.
Other than that point, I'm glad I bought it.
View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Vibration reduction effect is only temporary
Mounted on CT110 HUNTER CUB JA55.
I was hoping for a vibration reduction effect, but I think it is only a comforting effect.
I chose Matte Black and it has no Habit and the texture is very nice.
View detail
subtle
I replaced the blinker of my CB400SB with LED about 3 years ago, but it broke recently. I don't want to use Large Land's product, so I have no choice but to buy this product for my CB400 blinker relay. I would like you to make it more durable. View detail
the expendables
To be honest, it is just a Rubber, but without it, the Handlebar End cannot be installed.
And once the Bar End is installed, this Rubber part is crushed and fixed, so the Rubber is deformed once it is installed. Therefore, it is practically not reusable. When I reused a Bar End before, only one Bar End fell off and went missing, and I had to repurchase the whole Bar End.
Since then, we always replace the rubber with a new one.
At least, we are selling Rubber Only, Washer Only, and Repair PartsSingle Body.
View detail
Freedom. Hence the jumping difficulty level.
[How is it used?
Front Brake Fluid Tank for a YZF-R6 2016 (13S)
Tank is KawasakiOEM Parts (https://www.webike.net/sd/21984592/)
Fluid is Active's 4.0 or 5.1. Up to the capacity near the MAXLevel.
It should be about 6 years and a little over 60,000 km.
Bent at a rather aggressive angle, like a Landolt ring
Was the one you received as per Image?
The product is exactly as shown in the picture, with simple packaging and contents.
Was the installation difficult?
The installation itself is M6 BoltQuantity:Easy to remove and insert 2pcs.
The product can be bent freely and is designed to be used bent, but it is hard and requires a lot of strength or wisdom.
・Quantity:Pair (for Left and Right) However, if you bend them all at once, the surface will crack in no time and the color of the silver-colored material inside will become visible. The surface cracks in no time, and the color of the silver-colored material inside becomes visible.
How was your experience with it?
Although it was made of aluminum, it was robust enough to support a tank with Fluid up to near MAXLevel.
Although the surface area was torn up during the installation process, the original blue color of the intact areas has not faded, so it appears to be resistant to sunlight.
[Included Parts:were they on?
It is not attached at all. Compared to the flat Bracket, the Bolt may need to be changed to a longer one because of the thickness of the mounting area.
[Was there anything that disappointed you?
No, because the weight has not caused the bending to come down even if it is no-brown.
The surface can be easily roughened by bending with a tool, so the "Large is tough enough" mentality cannot be tolerated. As the product notes, if you want to bend it, it would be better to bend it carefully with bare hands or something, so that it can be installed with its beautiful appearance.
Even if the surface is damaged due to unbrowned bending, the performance as a bracket to support the tank remains and is reliable.
However Bending that preserves beauty." The degree of difficulty of the "Bend" is high and requires delicacy and care. In addition, since it can be bent freely, it is necessary to have Sense to be able to image how to bend and attach it in the best way.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, HONDA Super Dio, HONDA Super Dio, HONDA Dio SR, HONDA Dio BAJA, HONDA SUPERDioSR, SUZUKI STREET MAGIC 50, Others , Others , HONDA Dio, HONDA SUPERDioZX, HONDA TACTS, Others , HONDA DREAM50
Minus.
The Slotted screwdriver is quite narrow and I had to go out of my way to buy an additional Driver. If you don't have a very narrow Minus, you should not use it.
The quality is normal, so I don't think it's a problem.
View detail
A little pricey
I bought it because I wanted to immeChain it, and I think the price is a little high for just the Outer Cover. View detail