Reviews
Fits: KAWASAKI ZX-10R
Pad position is subtle
Inconvenient because the 10R OEMBrake cannot be removed without removing the Wheel.
Purchased to improve serviceability by underlining.
ABSFlareBlock, Hose (635mm), Fitting (20°), Mount Bolt (M8*20) are required for installation.
The swing arm needs to be removed when wiring, so it is quite large.
I used it on a new Crab, but the pad sticks out, so I had to shave about 5mm off.
I was able to do this in about 5 minutes because I had Leutor and TungstenBit, but if you only have File, this is also Large strange.
Weight is Quantity for Bracket and Caliper:It was almost the same as OEM with Set.
The design of the cutting groove was uneven (white spots) and the texture was not good. （The texture was not so good, but the others were good.
View detail
Recommendation of otherManufacturers, even if expensive.
It looks there, but it comes off easily by hand even if it is fitted in.
Other Manufacturers have Quantity on the reverse side.:Pair (for Left and Right) The shape differs in the following two cases, but this is the same.
So I think the hooking is not so good.
If the gold price were lower, it would be acceptable, but since the price is so high, it would be better to pay a little more and buy another Manufacturer.
View detail
Fits: YAMAHA YZF-R15, YAMAHA XABRE, YAMAHA XSR155, YAMAHA V-IXION R155, YAMAHA MT-15
This is for 320mm Rotor.
It was for 320mm, but the Rotor I chose interfered with the Caliper. I had to shave off the part where it hit.
To begin with, the XSR155 Big rotor is not available without importing it, so you need to be prepared for a lot of things.
The details are on YouTube. We hope you find it useful.
https://youtu.be/myATZbuZZe8
View detail
It's all about feelings!
[How is it used?
I purchased this product to install on my WR155R.
Was the one you received as per Image?
The product arrived exactly as shown in the picture.
Was the installation difficult?
Since the instruction manual is not included, I looked for a video of it being installed overseas and put it on.
As shown in the image, once attached, it is removed.
All air cleaner boxes are also removed.
Remove the duct attached to the box by peeling off the adhesive with Cutteretc.
Insert this product from inside the box, attach the manifold, and attach it to the Throttle body.
I see that the OEM Duct has what looks like an Air Chamber. I wonder if it is there to secure the capacity because of its length.
Material:Since it is Stainless Steel, it makes sense that it would not deform under pressure.
The joint with the air cleaner box should have been cured with Sea Ring material.
I didn't have any, so I covered it with something I could glue on as a substitute.
The process is easy, but it took a lot of work there.
How was your experience with it?
I honestly don't know!
OEM is Material:I wonder if this is a product made of Stainless Steel as a countermeasure against deformation under pressure, since it is Rubber. I think it is a product made of Stainless Steel as a countermeasure against deformation when pressure is applied. It is not particularly fast.
I wonder if the intake air is now more stable when the throttle is opened and closed. It is about the same.
More importantly, I'm surprised that Sponge had more on top of the Air cleaner!
In this case, I left it back in to see the difference.
We consider it as a PARTS of your feelings.
[Included Parts:were they on?
Sticker
[Was there anything that disappointed you?
I want the Instruction Manual!
View detail
It is lightweight, but…
Since the kit itself is aluminum and of small type, it is quite light and has a good design, so I am satisfied with it as a kit.
I was thinking of using OEM parts from Blinker to License Plate Light, but it seems that it is not possible to use them by simply installing them.
The angle of the license plate is not bad, and the kit can be installed without any problem.
The finish of the parts are made in a foreign country, and there are some scratches due to insufficient packaging, but once installed, they are not noticeable, so I was able to cover them up with the enclosed Sticker and forgive them. (Lol)
Overall, I think the price is a little high for such a small amount of content, but depending on the customization, the Rear O-Bar handle portion may be finished quite lightly.
It is not easy to find vehicles that have them installed, and most importantly, they are lightweight, so I plan to install them in a planned manner while having a lot of fun.
View detail