Reviews
When installing bremboCaliper
Installed when bremboCaliper was installed.
I had the color I wanted and the installation was completed without difficulty.
We will see about durability in the future.
View detail
If only the hose is Stainless, there is not much change, but … to Refresh the appearance.
The front brake hose bolt on my DRZ400sm K9 that I bought from a private seller on Yahoo auctions was so corroded and uncomfortable that I bought this hose first and installed it in anticipation of replacing it with a Brembo caliper.
Frankly, the Touch feeling with Snap is scarce as it is with OEMCaliper.
Of course, compared to the OEM rubber hose, the initial feel of the hose is stronger, but when you grip the lever deep down, it feels like it's biting the air. I'm not sure if I'm biting air or not, but it's a bit of a whiff.
We have tried three times to bleed the air, but little has changed.
According to a mechanic at a motorcycle shop that I sometimes visit, if the size of the master is not increased, the soft fee rings will not change.
I was happy with my replacement because I wanted to at least keep it looking nice for now.
The work itself is not particularly difficult, so if you are doing the work yourself, please be sure to take care of Torque control and air venting.
View detail
It's tighter
It looks better than OEM Product. View detail
Used for GSX R1000
Hose was also replaced along with the MASTER exchange. I think it is good that I can decide the length by myself. View detail
Fitting is the highest by the design only for a vehicle type. Texture is also very best.
Fitting is the highest by the design only for a vehicle type.
Texture is also very best.
View detail
exchange
I wanted to get something close to OEM to replace my APE for Rear, so I got this Black, Stainless Steel, Quantity:This is a Set product.
When I installed it on my Brembo caliper, I needed a Banjo with a different pitch.
View detail
exchange
When I changed to bremboBrake, the connection position changed and it seems to be a little overwhelming, so I bought a little long Hose and plan to change it.
It looks and feels like OEM, not flashy, but a pretty good feeling.
View detail
Black
I thought it was something close to NORMAL, so I bought this Black one.
It looks good and I like it, but you need to be careful when you install it to external calipers because it is a standard Bolt Pitch.
The length also seems short if you're not careful.
View detail
Used for Front brake
I used the front brake of STREET TRIPLE, and the touch of the brake became Snap, and it became controllable. I also like the fact that I can choose the length of the brake and I can easily order it when customizing.
I'm very happy with the simple custom look of the brake hose.
View detail
The price is a little high.
For the price of a single rear brake, I think the gold price is a little high. However, I am satisfied with the quality and ease of installation as it is made specifically for each vehicle type. View detail
Thankfully, it's vehicle-specific.
The color of the hose does not seem to change. [Color] I have chosen Smoke and the quality of the Banjo adapter is good. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSR750
Please be careful with your purchase.
In fact, I've Canceled and put off the purchase for a while. First of all, a motorcycle with ABS is a great way to get to ABSUnit for a very long distance. s running. Both front and rear wheels, the GSR750 has an ABSUnit behind the tank, so the OEM has a Front side Then, it is an iron pipe from the three-mata to the Unit through the bottom of the trunk. Therefore, there is a possibility that the performance will be lowered if you replace it. This GOODRIDGE stuff only requires 2 types of hoses. You will need to purchase the Banjo-Adapter-, Bolt and CrashWasher- separately at WEBIKE would be unkind if you didn't add this to the list. View detail
It's not like this type of car!
If you make it by car model, you can use the OEM line without waste! TJoint do not need it! Small monk, it's awful and you can not fix it to Stem with Tie Wrap! So after purchasing Banjo bolt or Adapter or For Left Caliper's short Mesh hose bought and bought it was expensive!
I knew that performance was good because it was long time ago!
In such a case Rose got it all together!
Well, the surplus Mesh hose can be attached to Rear. If you receive it.
View detail
Do not expect a dramatic effect
Ninja250 (EX250L) We installed in KRT Ver,.
When converting Front caliper to brembo 4pot, we changed it to tweed.
So the degree of the effect as a single item is ...?.
I feel that compatibility with ABS does not have much influence.
Fee Ring (Touch) Is the same as NORMAL.
As usual I am not shy, there is a feeling of Bunibuni.
However, I think that the effect of Brembo caliper is compatible, but the effect is
It has changed a lot.
When I started squeezing Lever with my usual feeling, I sinked quite well into Large eyes than usual.
This effect increases security.
It seems like the benefit of 4pot Caliper is Large.
But I wonder if that Bunibuni feel will change unless you change MASTER..
Let's wipe the Brake fluid to the bean, whether it is a cautionary point of replacement.
Yellow I have written "GOODRIDGE" and "ACTIVE" on a color Tube, but it leaked out
Oil was applied and the letters disappeared.
I know that "parts used for such a place", Ink is also a Brake fluid
Using a special Ink or Print that will not come off!
Also, set Instruction Manual to Color!
Because it is mono black printing, the image is also mono black, but it's just a black part so it's black
Even if you look at the picture it is hard to understand.
Clamp in the middle is not even a picture. Do you think yourself?
The connecting part on the Caliper side is inclined about 15 °, but this may be straight
If it passes through OEM 's ClampHose it unnaturally inflates at this Slant angle.
Although it is said to be exclusive items by car type, it is not perfect.
If this is enough it will only feel enough to change Caliper..
Since it looks like a Custom feeling, Merit is only that point.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
As imagined
When trying to improve the pure play, I can think of replacing Pad or replacing Brake hose, but since Pad has already been replaced by Besla, Caliper, Master cylinderO / H purchased at the same time.
Since Caliper, Master cylinder, Brake disc are all NORMAL, it does not change dramatically.
The effect did not change very much and Fee Ring just made it "Snap".
In case of seeking effect, I think it would be better to see 200 mm disc and brembo new Crab.
If you keep your vehicle at hand for a long time it will cost a little bit but Material : I recommend Banjo of Stainless Steel.
Unfortunately, one of Banjo bolt is Pitch 1. It was 0 brembo premise Package. Pitch 1 of OEM Correspondence. Only 25 Banjo bolt comes with one. I did not notice until the item arrived at hand. In the case of Normal master cylinder + Normal caliper, you will either use Banjo bolt originally attached or you will purchase a new one.
Brembo caliper If it's a prerequisite package, you should keep in mind the large product description.
Please note that it is a non-refundable item at the time of confirming the order.
View detail
usually
I wanted Smoked color so I chose this product.
Clear is cloudy, so
Black gets floating
Smoke is good feeling!.
View detail
OEM tick
Exchange during Brake fluid exchange. Personally, Black is more casual with the feeling of calm than Classic Motosecycle's Hose of strong Silver's Hose.
Since Brake fee Ring also exchanged Fluid at the same time, it became BrakeTouch effective with Snap.
View detail
Fits: KAWASAKI KSR-2, KAWASAKI KSR-1, KAWASAKI KSR-2, KAWASAKI KSR-1
Longer than OEM
NORMAL has a slightly long feeling, but this product is even longer. Brake hose is too short to be too short, but too long is a problem. Hose with a short total length, if the length is a little long, it will not fit in the fitting toes.
To the Manufacturer, sending an image of the temporarily attached state by e-mail, we sent a tokoro who confirmed, certainly sending okashii and a substitute article. I arrived the next day, so there was no actual damage.
Even if it is exclusive for each type of car, we recommend that you install after making temporary alignment.
Even for other types of vehicles of other Manufacturer, there was a similar thing, so if you ask the Manufacturer about the length between Banjo, it is better to consider the allowable range compared to the current Hose and purchase it maybe.
The Objection correspondence and promptness of this part Manufacturer was the splendor of special mention.
View detail
Although feeling is a thing whose Snap and admiration may increase like the Hose kit of a Front, Because the Back step is attached, at the time of parking, although I think that what is stretched a little is uneasy grade, and that it is satisfactory, of
Although feeling is a thing whose Snap and admiration may increase like the Hose kit of a Front, Because the Back step is attached, at the time of parking, although I think that what is stretched a little is uneasy grade, and that it is satisfactory, of course at the time of entrainment since weight is applied, since finger Sas is extended, the Hose has not run out or it always needs to be checked, so that the die length of a Hose may be short. I think that the Step of a NORMAL is more satisfactory at all. View detail
The engine-performance difference with a Normal hose is not felt. There was also no difference in the expected Touch as well as damping force. Is it such a thing? Satisfied with a feeling of a Customization of appearance. A difficult thing
The engine-performance difference with a Normal hose is not felt.
There was also no difference in the expected Touch as well as
damping force.
Is it such a thing? Satisfied with a feeling of a Customization of
appearance.
A difficult thing does not have
attachment in particular, either, and the amateur was also able to do it.
View detail