Reviews
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
feel well
You can get them much cheaper than Rear Sets and they are not that difficult to install.
You can't choose the position like Rear Sets, but it's a good position for me.
It is easy to ride.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Please note that the product cannot be installed by itself.
There is a 4mm gap between the Frame and the footpeg, but because the product is made from a single piece of wood with holes cut out, it is necessary to adjust the gap and install the product. After I removed the footpeg in order to install the product, I found out that there was a step difference, and I put two spring washers between the footpeg and the product on the upper Screw part, and between the Frame and the product on the lower Screw part. I sandwiched them and dealt with it. Because I adjusted the gap, the length of the screw of the attachment was not enough, and I used the screw of M8×30mm (although the tip of the screw does not come out to the end of Nut in 30mm). If you look at the shape of the parts, you can understand how to install it. It should be understood that it cannot be installed only by the product before installation (purchase?). But it is made by overseas manufacturer. I was satisfied. In addition, because the hose cannot reach the Master Cylinder Cup, it was necessary to move the installation position with Bracket, Screw, Nut, etc. View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Please note that the product cannot be installed by itself.
There is a 4mm difference between the top and bottom of the footpeg screwed to the frame. It is necessary to adjust the gap between the frame and the product. After I removed the footpeg for installation, I noticed that the gap between the frame and the footpeg should be adjusted. I dealt with it by inserting two sheets of spring washer. In that case, because Screw (M8×25mm) of the attachment was short, I used M8×30mm (Note:The tip of Bolt does not come out from Nut in 30mm) and installed it. In addition, because the Hose does not reach the Master Cylinder Cup, it is necessary to change the position by Bracket, Screw, Nut, etc. separately.
You can see how to install the product by looking at the shape of the parts, but you should know before you start the work (or rather, before you buy the product?) that you cannot install the product by itself. I want you to understand before you start the work. But, it is made by overseas manufacturer.
View detail
It may not be possible to fit the default BremboBrake lever.
ZX-10R ('19) The initial equipped brake lever of Brembo is Brembo, but it could not be installed.
I think that there is a corresponding Lever, but this product is Universal Product and there seems to be no guarantee of conformity.
View detail
Fits: TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE RS, TRIUMPH STREET TRIPLE RS
The quality is at the lowest level, so be prepared to pay for it!
I'm still negotiating with WehBig about the return policy, but I'm posting this ahead of time to prevent damage spread Large.
The product is made of Gel Coating and there is no bolt hole to attach the bracket, and there is no mark for punch.
There are many cracks, gouges, chips and scratches on the surface, and the Gel coat is even transparent in thin areas. (WehBig says it's a good product, in their opinion.)
In addition, there is no Serial number or Lot number to guarantee the quality of the product, which is impossible considering that it is a foreign product.
It was a lesson learned that WehBig may sell a certain Chinese ECSiteLevel product.
View detail
Fits: SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750
Cool, but...
I can't read the instruction manual because it's in Spanish or Latin or anyway not English version (lol)
with I didn't do Bolt. Something like this?
It took me six months from the circumstances to install it after it arrived at hand, and I opened the package and noticed
I didn't contact Webike, partly because I was responsible for not checking immediately, and partly because the Bolt is available as a Universal Product.
I managed to figure out which Parts are attached by relying on Google Translate.
It looks so cool and the difficulty until then is good.
View detail
S2 water tank protection cover
My car is Damao Kawasaki Z900 2021. I bought S2 brand water tank protective cover products on Webike. The material of this product is glass fiber, gel-coated. Pasting this can protect the water tank from being bounced by rocks during driving to cause the water tank to crack. I will also recommend Wibaike platform to other friends, hoping that Wibaike products will be more and more, and the price will be more and more favorable. ---------------------------------------------- My car is a 2021 Jeep Grand trade Kawasaki Z900, I bought a brand S2 tank cover goods on Webike. This product material is fiberglass, gel coat. This paste can protect the tank during travel the tank is not cracked stones produce bounced. I will recommend Viagra 100 passengers platform with other Friends of Mount hope Granville 100 passengers more and more goods, more and more price concessions. Powered by Google Translator View detail
Z900 lower diversion
My car is Damao Kawasaki Z900 2021, and I bought the lower diversion product of Z900 on Webiike. The material of this product is glass fiber and gel coating. This lower diversion one is more attractive to install, and it is no longer empty under the streetcar. Second, I feel that I can protect my exhaust pipe and airflow guide. I will also recommend Wibaike platform to other friends, hoping that Wibaike products will be more and more, and the price will be more and more favorable. ---------------------------------------------- My car is a 2021 Jeep Grand trade Kawasaki Z900, I bought a case of diversion of goods Z900 on Webiike. This product material is glass fibers and gel coating. The next diversion is mounted on a relatively nice music, it is no longer empty street car below. The second is to protect yourself feeling the exhaust pipe and the air flow diversion effect. I will recommend Viagra 100 passengers platform with other Friends of Mount hope Granville 100 passengers more and more goods, more and more price concessions. Powered by Google Translator View detail
S2 tail rectifier
My car is Damao Kawasaki Z900 2021. I bought S2 brand rear rectifier products on Webike. The material of this product is glass fiber, gel-coated. The installation of this can effectively spread the airflow on both sides during riding, and this installation is very beautiful. I will also recommend Wibaike platform to other friends, hoping that Wibaike products will be more and more, and the price will be more and more favorable. ---------------------------------------------- My car is a 2021 Jeep Grand trade Kawasaki Z900, I bought a brand S2 tail rectification of goods on Webike. This product material is fiberglass, gel coat. This placement can be effectively dispersed in the gas flow on both sides better during cycling, and this is very attractive to install up. I will recommend Viagra 100 passengers platform with other Friends of Mount hope Granville 100 passengers more and more goods, more and more price concessions. Powered by Google Translator View detail
Worst response.
Even though it is an imported product, Quantity:Pair (for Left and Right) The product that should be symmetrical was asymmetrical and could not be installed. When I applied for a replacement, I received a reply asking me to send a picture showing that the product could not be installed. And the only way to contact them is through their web site? That's enough of that! I want my gold and time back! If there is a problem with the product, shouldn't it be the seller's responsibility to check it out? View detail
The only Tandem grip on the current Ninja 400 and 250
There are two things I was hoping for with this product.
Passenger must be stable during Tandem.
To be able to have a place to hold on to when moving the motorcycle.
It's a product that serves well as a Grab Bar.
However, the function as a part to grab when moving the Motorcycle was not enough to change dramatically.
The product itself weighs more than I expected and is solidly built with the expected rigidity.
When mounted on the Ninja, it seems to blend in with the Design, or not so much…
Please refer to the pictures.
By the way, I have a Ninja 250. (2020MODEL) Used for
I bought the Bolt from Home center because the length of the Bolt was not enough.
I bought and replaced M6x35/4 pieces instead of M6x30/4 pieces.
I was able to install the Others on my Ninja 250 without any modification.
The price is high so it's not very cosy…
However, since no other manufacturer has released a Pillion Bar for the current Ninja 400 and 250, it is not possible to use it.
Thanks for making it! I gave it 5 stars to say.
The following is Instruction ManualJapanese Version.
Black Plastic Spacer between each Handlebar and Interface (Packaged in Silver and maybe Aluminum) Secure the Handlebar to the interface with the Screw while inserting the
Fix the assembled Handlebar to the car body with Screw and Nut.
Between the vehicle body and the interface, the Spacer (Front4mm、Rear6mm) Insert the
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
Performance as expected
As the predecessors have already said, the installation is basically on your own, but well, you don't have to worry about it that much.
However, it is necessary to transplant the Master Cylinder of Rear brake to the rear as well as this has already been written.
Probably because Brake Caliper was changed for the 2019 model year.
I used this one for the transplant. (Screw is my own)
KITACO (KITACO) Aluminum Bracket (Type 20-02/3mm thickness) Universal Black 529-0301023
I also prepared some of the footpeg screws myself. the OEM is a little short.
I think the cost was generally good, because Rear Sets are expensive.
View detail
Fits: SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750
Silencer Bracket
I bought it because of its simple design.
The SCORPION Exhaust System was used, but the position of the exhaust system was not correct, so a collar was placed between the bracket and silencer.
There are some bender marks on the product, but the production itself is solid, and if you think of it as an overseas RaceParts, it is a passable product. The position of the Gap is correct, so I think it is just the compatibility with the Silencer. The product is a Bracket Only and there is no bolt or color, so you need to prepare by yourself.
I am satisfied with the Design, but I feel the Gold price is high. (It's an average price for a Bracket). 。
It is aluminum, lightweight, and I like the color because it looks OEM.
View detail
Towards Single
In putting on the Single seat cowl, I also want to remove the Tandem Footpeg!
It's also an Exhaust Bracket though…
It was the closest to Image that I could find, so I bought it & installed it.
It is supposed to be a special product, but even Normal muffler had Gap in the hole position.
Tighten it while watching the Bolt3 Balance and you're done!
However, the Bolt on the Exhaust System side cannot be diverted because the OEM is a half screw.
I used the m8 20mm because I added the anti-vibration Rubber.
It looks great!
The vibration of the exhaust system seems to have decreased.
View detail
Verify what happens when you buy 0 imprints!
I know it's sudden, but are you the type of person who reads Impressions before making a decision?
I always make sure to check it out and read through both the good and bad feedback to make sure I'm satisfied before I buy.
--but this time, I bought this [S2 Concept S2Concept Seat Cowl Color:GrayMNm3] I fell in love with it at first sight, and even though there were 0 impressions, I found myself completing the payment!
……Well, the quick story is? I've become a pillar of the foreign-made Parts! It's a kind of a thing.
I would like to write an Impression in order to be a reference for your future purchase.
[Mounting accuracy
First of all, it is the part that you are most concerned about, but it seems to be a manufacturer of France when I examined it.
I've had some painful experiences with Made in ItalyParts in the past……This one was no problem at all!
The Cowl Bracket hole position is perfect for installation!
Accuracy. I'm sorry. It was! (……It's possible that mine just happened to be good.
As for the installation work, I think that even a beginner doesn't have a problem because it only removes the hexagon.
By the way, I have an external Fender Eliminator Kit, so I'm not sure if it will fit on the OEMRear Fender…….
[Time until product arrival].
The order was placed on 11/27/2020 and the delivery time was 2 months because it was an ordered product.
It is also scheduled to ship from Webig on 1/28/2021. They're coming from overseas. We'll just have to wait and see. I thought it was a good idea, but it was actually delivered to me on 2020/12/18.
Despite the fact that this was a Corona disaster, it took about three weeks for it to arrive, which was a nice surprise! (Thanks Webig!)
[Design]
I bought this at first sight, so I don't need to rate it, but it's awesome!
As much as I love my Triumph THRUXTON Large, I think the XSR with a single seat cowl is an ironclad combination!
Quality and Texture
This is the reason why I gave it -1 star. [Paint unevenly] There was a …….
It's a Mad Spec. so this is slightly noticeable……but you have to get pretty close to see the Level, so it's probably not noticeable to anyone but the Owner.
if you are concerned about [Color Unpainting] I think it would be perfect if you could buy that one and have it painted at a sheet metal store to match the color, taking into account tanning, etc.!
So I've written this in quite a bit of detail, but in conclusion-- [Large happy with the purchase! It was!
It took a lot of courage because there were 0 Impressions and the Parts were not cheap, but I thought it would be nice to have this kind of adventure once in a while!
Also, 0 Impressions means that there are 0 people who have the same Parts ……but I think there are few people who have the same Parts.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09
It needed some processing.
Installation requires drilling. Because of its flexibility, it is easy to install if you can locate the holes. View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
It's cheaper than buying Rear Sets.
The same level of brake fluid reservoirs. (4cm) ZURAS
It is necessary to prepare Universal Bracket or something else because you need
Quantity:As a set item, it's a bit of a disappointment.
I had to change the Handlebar to something lower and farther than standard first.
This made me feel pretty comfortable.
And then there's the High seat? I painted the colors myself.
View detail
Fits: BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000RR
Processing required
Normally, the Cowl is composed of three parts, but I wanted to integrate it for the purpose of improving the maintenance. Therefore, it is necessary to drill holes while actually matching the actual item. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09
Just right for the STREETFIGHTER type.
Originally it seems to be made for MT-09, but I used it for STREET TRIPLE because the position of the handlebar becomes lower and the width becomes narrower than the OEM handlebar.
However, since it's an international product, the price and delivery time are NECK.
View detail
Fits: SUZUKI SV650 ABS, SUZUKI SV650 ABS
I've learned to FIT my body.
I'm on an SV650X.
I was introduced to it because I am 178cm tall and have a rather large patterned body and the position was a bit cramped.
As a result, I feel that I am happy with the implementation.
As for the installation, it was installed without any difficulties.
However, as a result of the installation, I wanted to adjust the Handlebar side as well.
Tommaselli's adjustable handlebar has been introduced.
View detail