Reviews
This is not a conversation.
The part where the clasp is hooked fell off during the product installation stage, and the product became Garbage as it was.
I bought this product because I believed in the brand, but this is not a good thing.
It's also a security product, for one thing.
View detail
The sense of security is different without it.
We installed it on a GSX-R125.
As a former victim of helmet theft, this is a must-have product.
To install, simply remove the Left Side Tandem Footpeg once and insert it between the two.
It is a very simple process.
In the meantime, we recommend retightening the screws with the proper torque to prevent the footpeg from falling.
View detail
Fits: BMW R1200R, BMW R1200RS, BMW R1250R, BMW R1250RS, BMW S1000RR
Helmet holder can be attached to SS
[How is it used?
Used for storage of Helmet
Was the one you received as per Image?
It was identical to the photo shown on the website.
Was the installation difficult?
Simply remove the Rear Footpeg and reinstall it across the Bracket.
Very easy.
Be careful with tools because the bolt is a torx bolt.
When installing the key on the bracket, be sure to follow the instructions for attaching the Screw Lock to the Screw.
How was your experience with it?
The Holder makes me feel very safe when I leave the Motorcycle.
Since the helmet comes exactly at the rear footpeg, care must be taken not to scratch the helmet.
It was available for the 2023 MODEL.
I had a hard time with Speedra's Helmet lock, but the mounting points will be in the same place.
However, KIJIMA's product has an extended bracket and can escape from footpeg, so this is adopted.
Speedra was forsaken for installation in the same location as the footpeg section.
Babyface was also considered, but the key part is shaped like Straight when it is opened,
I thought about the possibility of Helmet falling off, so I stopped.
KIJIMA and Speedra are expected to prevent falling due to their U-shape.
The frame is black and the bracket is also black, so they are the same color and inconspicuous.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CB250F, HONDA CB1300 Super Four, HONDA CB400 SUPER FOUR, HONDA GROM, HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA VTR-F, HONDA VTR250, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA Forza300, HONDA CB500F
Pros and cons of locking with a key
Installed on pcx 125 jk05.
Installation is very easy as it is co-tightened to the Master Cylinder, and the limited space around the handlebar is good as it does not kill the space around the handlebar.
In addition to Helmet lock, it can also be used as a Convenient Hook.
I purchased this Type product that locks with a key for its security performance, but I find it troublesome to open and close the key every time.
I also find the increase in keys to be depressing.
This is a good product for people who don't mind having more keys and locking and unlocking them each time.
It doesn't hurt to have it on.
View detail
Not available
Installed on a ZX25R.
The installation itself is very easy and can be done quickly with a Hexagonal Wrench.
After installation, I tried to use it, but to my surprise, the Wire length was too short to use.
I have a Smartphone Holder attached to the Daytona Clamp Bar, but it gets in the way and hits me.
I am considering whether to remove the Smartphone Holder or the Wire lock that I have installed.
View detail
Rear Sets are removed and Helmet is fixed...
I purchased this product because of the difficulty.
To install, simply remove the Tandem FootpegBracket and secure with the included Bolt.
It is easy to install. and no practical problems.
View detail
Fits: SUZUKI GIXXERSF250, SUZUKI GIXXER250, SUZUKI GIXXER150
Is it required?
The frame shape has not changed, so the 2023 MODEL has been properly attached! View detail
To install Rear suspension of Tank Separated Type
This is because it interferes with the hydraulic tank of the Rear suspension.
There is nothing noteworthy about the texture or functionality, but the position for fixing the Helmet has been Offset forward, so that the Helmet can be just hooked onto the footpeg.
Helmet lock in #Tail direction sometimes hit the back of the helmet.
However, since the service manual instructs the application of a screw lock to the bolt fixing the tandem footpeg, we recommend the use of a socket wrench instead of a hexagonal bar wrench.
Parts cleaner and medium-strength screw lock are required to remove the remaining screw lock during installation.
Finally, if more parts are to be tightened together as shown in the photo, it is safer to prepare longer screws at a home center or the like.
View detail
Easier to use than OEM Wire type
The M6 Hexagon Socket Bolt that holds the OEM Tool Box in place is co-tightened to two bolts, a design that is also friendly to custom beginners.
Worse, if you loosen it, the whole helmet will be stolen, so it may be safer to replace it with a tamper-proof bolt or something similar.
View detail
You can buy with confidence
I bought it to use on my katana in 2023. It also fits my 23 year katana, so you can order it.
The price is affordable and it fits the car like genuine. Delivery is fast and very satisfied
Highly recommended. Looking forward to storing my helmet for my next tour.
Fighting all Katana riders --------------------------------------------- ------------- I bought it in 2023 for use in Katana. It fits well with Katana for 23 years, so you can order. The price is cheap and it goes well with the car like genuine. Delivery is also fast and very satisfied Highly recommended. I'm looking forward to storing a helmet on the next tour. All Katana Rider Fighting Powered by Google Translator
View detail
It is easy to install.！
I ordered it right after the delivery of my car because it is inconvenient to go anywhere without the easy-to-use helmet holder. 。 Installation was easier than I expected and I didn't have to worry about it. View detail
helmet lock
JA65 CT125 Korean model also fits well. Installation is relatively simple by removing/attaching the seat hinges. A bracket is installed at the bottom of the seat hinge, and the locking mechanism is bolted to the bracket. It is designed so that the bolt cannot be unlocked in the locked state, and the anti-theft effect seems appropriate. Since it is a single cylinder with severe vibration, it seems that a threadlock is needed for the fixing bolt. View detail
![[K・TOUR] Helmet Holder](https://img.webike-cdn.net/catalogue/images/117931/80-564-14610_1_TS.jpg)
of good quality
However, in my case, the position of the DRing did not reach the Holder because I used SHOEI's GT-air, so I had to purchase a separate wire to accommodate the DRing. The Holder side does not have any problem. The product is well made and looks good as the OEM Level. View detail
I installed it myself.
There is no Instruction Manual and installation was quite tedious. There was a video showing the removal of a plastic board? I saw a video of a person taking off a plastic board and installing it, but was it too much for an amateur or was I not good at it? It was a bit too much for an amateur. In the end, I managed to install it by shifting it, but it got some scratches on the steel bar. View detail
Easy to use
I lock it through here because I have experienced that the chinstrap of the helmet was cut and the helmet was stolen.
I guess it's a little harder to steal.
View detail
Be careful if you are using SHOEI's Helmet!
The product itself is great, but I couldn't use it on my SHOEI GT-AIR2….
Sad….
Well, it can be used for other helmets, so it's OK. (Lol)
View detail
It's so good
That's one word for it.
I have a Ninja 1000SX and I can attach it to the helmet holder.
Purchased because it is hard to put on.
The product itself is great, although how to utilize Carabiner is a challenge!
If you're using GT-AIR2, choose this one.
View detail
![[K TOUR] Helmet Holder](https://img.webike-cdn.net/catalogue/images/85546/80-564-18500_01_TS.jpg)
Fits: HONDA CB125R, HONDA CB250R, HONDA CB650R, HONDA CB300R, HONDA CB150R
I'm glad I bought it
There is no interference between the helmet holder and the body, and I am satisfied with the large size of the product. I am happy to have purchased this product at a low gold price. View detail
Made by KIJIMA!
I purchased a Helmet lock made by KIJIMA for peace of mind.
I highly recommend this product because it is Simple and SMART to install.
In the case of RC390, it is simply inserted between the Left Side Tandem Footpeg and the Frame.
Since the bracket and the locking part are separate parts, and the locking part is fixed only by a protrusion and Plus screw, it is recommended to apply screw lock agent to the screw part.
The feel was very good, and although I was concerned that it might hit my feet while driving, I had no problems.
View detail
This is a standard external helmet holder for BMW.
I bought this for my BMW G310GS, the same manufacturer as the one I installed on my R1250GS, so I had no hesitation in purchasing it. There is no specification on how much torque to apply, so I tightened it to the point where the body would not rotate. It is very convenient to have it when you have luggage in the Pannier. View detail