Reviews
Great replacement for Convenient Hook
Installed on XForce.
Since YAMAHA's Option product costs more than 20,000 yen for the Base and Hook, I was stupidly waiting for the Other Brand Product to be released.
The price is more than double the market price if you consider it to be just a Convenient Hook, but it is bearable compared to the Option product.
To install, simply remove the Screw and replace it with the OEM Product.
A little difficulty when tightening (The short end of the Hexagonal Wrench does not fit) It is easy to the extent that we did.
There is no Large problem with the product....
I wanted to be able to hang something a little thicker.
Because you only need one Hook, (like Carabiner). I wanted the structure to be such that it would not come off even with vibration.
View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA Axis Street, YAMAHA Cygnus X, YAMAHA BWS125 (Bewith), YAMAHA Axis Street, YAMAHA Cygnus X
สีสันสวยงามคุณภาพอย่างดี View detail
Installed on a 2021 MT-09SP
I was thinking that I would not need a Loader Hook since I have a Seat Bag attached when touring, but I bought this Hook because I thought it would be useful for touring around the neighborhood without a Seat Bag attached and for bringing back food I received while on the road. I bought this Hook.
At the time of purchase, the one made by DAYTONA was cheaper on sale, but it had a 2-piece structure, so we decided to go with Endurance, which has a one-piece structure and a clean shape.
The length of the Bolt is 40mmType which makes the protrusion the same length as the OEM Bolt.
When used with Endurance's Rear Carrier, the 60mm Type seems to be used.
The SeatBack is convenient, but since we have short legs, the bag makes getting in and out of the car a hassle.
Net bought 30cm×30cm, but when I put it on Hook, Seat becomes boneless ham, so a little larger size might be better.
View detail
I am concerned about Bolt's Size.
Here are my impressions after installing on a Triumph SpeedTWIN1200.
Since there was no place where a Net could be attached, it was installed in the form of replacing the Bolt on the Rear suspension.
The work was easy and securely installed, and the Net is now ready for use.
Also, the texture is adequate for the price.
I bought Black, and if I wanted, I would be happy if the center Bolt was also Black.
Bolt size was a concern during installation.
The length was fine, but the diameter was slightly smaller than M8, and I was a bit concerned about the possibility of the mountains licking if I tightened the screws too hard.
(It may be correct to say that the Frame side may be just slightly larger than the M8, so it is not an outstanding match when installed on SpeedTWIN.)
I'm generally satisfied.
View detail
This is still more convenient
The OEM Hook was a separate upper and lower type that required pulling it out and then opening the upper side, but I didn't feel the need to hook it so tightly on the highway on my 125cc, so I replaced it with an inconvenient type. As a result, I replaced it with a Large type, which is convenient and allows me to hook a small bag or a bag of convenience without any stress. View detail
Available for yzf-r25
It could be used for yzf-r25.
I am planning an overnight touring trip and my normal Seat bag will not be able to handle it, so I purchased this product.
If I wanted to buy a large seat bag, it would cost about 10,000 yen, but I felt that I would not use it that often, so I put my Rucksack on the Tandem seat and hook the Belt to the Hook here to hold it in place.
Although a fixed belt must be purchased separately, it is cheaper than buying a large Seat bag!
It is also recommended for occasional overnight Touring with SS, as it is hardly noticeable!
View detail
temporary custom
Custom Convenient Hook.
The Bolt can be easily replaced with a single bolt, so even beginners can easily customize it.
View detail
I can't believe it.
When I installed ODAX Grab Rail, I could not hang touring hook because Rail Clearance is too narrow. I installed a low-priced product from KN Kikaku as a last resort ?It is wonderful. The finish is beautiful and the touring net can be used without any problem. The cap bolt that comes with the product cannot be used because of the Grab Rail, so I replaced it with a stock bolt. I really wanted to get a Black one, but I think it would be good! View detail
Seat bags are easier to load.
Since Seat bags and Boston bags are often carried on the rear end of the Seat when touring, we aimed to increase load capacity by attaching this Loading Hook and Grab Bar.
As expected of an OEM product, the quality is perfect, and the mounting position is very convenient for loading the luggage.:Set
However, since the Instruction Manual is somewhat confusing and there are many Bolts and Covers to remove, it was not possible to complete the work in the 0.5h written work time.
Also, since this is for a car that does not have such equipment on the body, I really hope that Option Parts is at least a little less expensive ^ ^.
However, it will definitely improve the load capacity by a LARGE amount, so I am looking forward to going on long tours with it!
View detail
Purchased for securing luggage
We chose antlion, although there are cheaper ones for the same purpose from other companies.
The price is high and I am satisfied with both quality and design.
Hook also takes without problems.
View detail
Now you don't have to worry about long touring!
The Hook is essential when carrying a large backpack for long touring or camping touring.
The more Hooks you have, the more you can use, and the larger the Hooks, the more you can use.
This Hook is satisfactory and useful.
View detail
License Plate is not bent
I bought this because when I put a Cover on my motorcycle, it hits the License Plate and bends. I was worried about the large load on the screws because they are plastic, so I applied Screw Lock to the screws to prevent them from falling off.
It also looks good.
View detail
Mounted on KTM 250 ADVENTURE
Replaced with Inner fixed Bolt by Tail Cowl.
Since the KTM 250 ADVENTURE does not have any kind of Loader Hook, we will use the MOTOFIZZPlate hook3 and the DAYTONATouring hook as a loader point to be used together.
The 25?Cap bolt that came with it was usable as is with no length issues.
View detail
Just a little something I got up to.
This is a cargo hook, but the OEM is what is called an iron rat color. The OEM model has a hook, but the hook is shallow and the string comes off quickly, but this one is firmly recessed so the luggage does not come off. I would be more disappointed if the part that sticks out and stands out subtly is too bulky, even though it was custom-made by Decal. I am a little concerned about the high price, but I am glad I won. I am glad that I chose this one, because there are not many products of this kind made by Nakayo. View detail
Together with DAYTONARubber cord, it becomes a cord for fixing
[How is it used?
When you want to add a little more after fixing a large object with the ROK strap, or when you want to use the ROK strap for a large object.
To prevent misalignment, use a DAYTONARubber cord and this product.
I'm combining them and fixing them subsidiarily.
Was the one you received as per Image?
Yes
Was the installation difficult?
It was easy.
How was your experience with it?
The Hook looks Large in relation to the Rubber cord.
It has to be that large to fit on the back of a truck.
I was convinced that that was the way it was.
I am pondering how to make Hook fit better when putting the code together. (It's not that much of a problem.)
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
DAYTONA Rubber cord can be attached
It can also be hooked to the thicker part of the cargo bed for Endurance's Rebel 250.
View detail
Loader Hook
The usability and texture were also good. View detail
Even when not in use, it does not feel uncomfortable.
I bought it to put the Seat bag on the Rear Carrier, and it was easy to install, and the quality of the product is perfect. View detail
Beauty, good cosmetics, and recommendation.
[How is it used?
I purchased this for a dress-up purpose because the screws around the License Plate are lonely.
Was the one you received as per Image?
Gold color was strong and darker than expected, but satisfactory quality.
Was the installation difficult?
Just replace it with Bolt. In my case, I used it together with the anti-theft Bolt.
How was your experience with it?
I have not used it as a Loading Hook yet, but I am satisfied with the Dress-up effect.
[Included Parts:were they on?
Mounting Bolt is also properly Material:It came with a Stainless Steel Screw.
[Was there anything that disappointed you?
Not particularly
Compared to ▼POSH's, the price was lower and the Quality was fine. The color is only Blue and Gold, so it would be better if there were more lineups.
View detail
Active is the best!
Easily installed in the color of your choice.
The practicality of the product was great.
View detail
Cool and practical!!! Impeccable!!!!
As a conclusion, this Parts "buy" First of all, I'd like to say a few words. First. Practical." ！GunGun
You can hang it on a Hook! And Design at its best." It's cool!
And above all. Outstanding durability!" I can hit it and it won't budge! It doesn't even hit me!
TouringRider is a must, it's a RECOMMENDATION!!!
View detail