• Home
  • Product reviews
  • Search reviews
steps-review.png
Filter
icon-webike.png
Write a review and get Webike Points!

Reviews
ANEX Clear all
Screw Breaker Driver [+3 x 150]
ANEX
Screw Breaker Driver [+3 x 150]
Japanese Webike user
3/5

It's inexpensive, so it's a good idea to have it as an insurance policy.

I ended up relying on Extractor, so I couldn't use it on the rusty, soggy Screw.
However, it would be good to take it as a preliminary bad idea before drilling holes with Drill.
It is possible to buy it as insurance because of its low price. View detail

Screw Breaker Driver [+2 x 150]
ANEX
Screw Breaker Driver [+2 x 150]
Japanese Webike user
3/5

We can't expect too much.

I was attracted by the phrase, "You can turn a tapped screw! I was attracted to this product by the phrase, "You can turn a screw that has been tampered with!
However, in the end, it depends on the strength and condition of the Screw side, so it is not able to stand up to a soggy Screw.
It's a pain to use Extractor out of the blue, but it's good to have it as an insurance policy for positions and types of Screws where Neji-saurus-like things are not available. View detail

Micro/Combination Hammer[180]
ANEX
Micro/Combination Hammer[180]
Monkey MAGIC
3/5

micro mini head replacement Combi Hammer

Quality and texture information is a small hammer It can be used for many purposes and is intended to be used to disassemble the engine case Replace with design information Product # NO.9056 for multiple purposes Size chart information 180mm Cost performance and comparable price to other products, but at the right price WeBike packaging is always great, arriving in a week for delivery and packaging It is not a product that wants a big impact because it is smaller than I thought when purchasing. I think it is suitable for hand-made industries View detail

Ball Point Hexagon Wrench Driver [Opposite Side 4 X 130]
ANEX
Ball Point Hexagon Wrench Driver [Opposite Side 4 X 130]
Japanese Webike user
jp
3/5

Convenient when you want to tighten and remove lightly

[How is it used?
I bought it mainly to dampen the Suspension, along with the other Size, and wow!
I didn't check the Size carefully, so the Size didn't match.

How was your experience with it?
I didn't get to use it in the area I originally planned, but I am using it for simple exterior Bolt loosening and tightening.
If it is a screw of this size, I thought that Torque of the range that can be used with this is enough.

[Points to note]
It's a ball shape, so if you apply force with a high Torque, the head will probably come off. Yes. It will come off.

How did it compare to other products?
This time SizeI bought the wrong one and found a use for it in another place as a result, so I don't think it's particularly necessary if you have a regular hexagon. View detail

Off-set Ratchet Driver With Super-short Bit [Super-short Bit -6/+2]
ANEX
Off-set Ratchet Driver With Super-short Bit [Super-short Bit -6/+2]
Japan User(translated)
jp
3/5

It is an Offset ratchet driver of ANEX 425, and 1/4HEX which has established reputation in a Driver.Super-short bits (-6 mm-Ph2) with a low back of 19 mm are attached to a Package.This product is a Straight handle although the Lineup also of the Bent type

It is an Offset ratchet driver of ANEX 425, and 1/4HEX which has established reputation in a Driver.Super-short bits (-6 mm-Ph2) with a low back of 19 mm are attached to a Package.This product is a Straight handle although the Lineup also of the Bent type at which the Handle turned is carried out.Although a Stubby driver is used in a part with few crevices containing a tool to the axial direction of the Screw, it becomes the turn of an Offset driver of this sort at the place into which it still does not go.If attached super-short bits are used, 21-mm thinness will be realized from a Head to a Bit tip.Bit maintenance is a Magnet and can use the Bit of 1/4HEX broadly besides attached super-short bits.

Though regrettable, a feeling of operation of a Ratchet is not so good, and an idling Torque is not the lighter one, either, but is there using this only in the place containing never? -- View detail

Hexagon Wrench Driver [Opposite Side 4 X 130]
ANEX
Hexagon Wrench Driver [Opposite Side 4 X 130]
Japan User(translated)
jp
3/5

Although it was going to loosen the hexagon head of 4 mm, this did not loosen for the Driver. It was useless in their being T type or a Ratchet VOX. I think that it seems to be natural.

Although it was going to loosen the hexagon head of 4 mm, this did not loosen for the Driver. It was useless in their being
T type or a Ratchet VOX.
I think that it seems to be natural. View detail

Manual Impact Driver Bit (for NO.1900)[+2 X 36]
ANEX
Manual Impact Driver Bit (for NO.1900)[+2 X 36]
Japan User(translated)
jp
3/5

Since the bit which was being used until now had been worn out, it purchased. Since there was nothing at the shop front of a neighboring DIY store, it purchased by Mr. Webike. The screw thread was also suited well and it was satisfactory. When

Since the bit which was being used until now had been worn out, it purchased.
Since there was nothing at the shop front of a neighboring DIY store, it purchased by Mr. Webike.
The screw thread was also suited well and it was satisfactory.
When using it like crazy, it wears out and is the 2nd purchase.
Even if worn out, the place which it is in stock and obtains immediately was the first merit. View detail