Reviews
Nozle at the time of oil injection
I think it comes with the Oil when you buy it, but if you don't have it when you pour, you spill it, and if you wipe it clean after use, you can use it quite well. In terms of selling price, it's a bit pricey. View detail
Compact than I expected
When I received it, it was more Compact than I expected.
Gloves are also useful.
View detail
I buy it all the time.
The gloves are very helpful and keep my hands clean. View detail
Required for Oil replacement!
[How is it used?
I use this when I change the oil in my Scooter! I had to cut a dry plastic bottle to pour the oil, but it was a hassle, so I bought this product. I am glad that it became easy.
How was your experience with it?
Of course it is easy to use. It is a common Nozzle? I would appreciate it if you could put it with the Oil when you buy it. It gets sticky after one use, so I think if you wash it thoroughly and store it, you can use it again.
How did it compare to other products?
I felt there was not that much difference. I think they are the same.
Might as well buy them together when you exchange Oil!
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Easy to use
It was very easy to use. I just don't know if I'll be able to store it. View detail
Safety and environmental protection
We repair and maintain motorcycles by ourselves, and the replaced waste engine oil must not be thrown away. This Webike Garage Oil Disposal BOX is purchased for waste engine oil. It has a capacity of 2L, which is enough to maintain my scooter. If necessary, it also has For the 4L model, nitrile gloves are also included so that your hands will not get dirty when draining the oil bolt. -------------------------------------------------- -------- We repair the motorcycle ourselves, and the replaced waste oil must not be poured off at hand. This Webike Garage Oil Disposal Box is purchased for the installation of waste oil. It has a capacity of 2L to maintain my pedal. The 4L model is also included in Dingyu gloves, so that the hand will not stain the hand when the oil bolts are placed. Powered by Google Translator View detail
I wish they were a little cheaper…
Title is right I think probably all Users who bought this product agree with me lol.
I am a Rider who does not make any discovery, so this is my rating.
I bought it last year and have just used it and have no problems using it.
View detail
Unexpectedly easy to lose
[How is it used?
When I buy Oil, I find myself buying it together.
It can be used many times, but after using it once, I am very prone to losing it.
Made in foreign countries (A little expensive) Plastic containers that are a bit nifty have nozzles at the mouth, but many Japanese tin plate cans, such as OEMOil, do not. You will need such a nozzle.
How was your experience with it?
Basically, it can be used for 1L tin plate cans, whether Honda, SEA BASS, or Yamalube, since the tin plate can itself is almost the same.
If the oil inlet protrudes from the outside, this is sufficient, but if the oil inlet is located a little further back, such as on a scooter, or if the inlet is extremely narrow, as on some off-road motorcycles, a gardening funnel or narrow-necked Sprinkling can is easy to use.
How did it compare to other products?
First, it is”by far”easier” than pouring directly without anything. Pouring without anything usually results in spillage and contamination of the Engine. The dirt on the dripping oil is disastrous.
Plastic funnels are available at 100-yen stores, but once you use one, you have to wash it again or use different types of oil, so it is better to have several disposable funnels. It might be a good idea to buy 10 or so in bulk since they are inexpensive.
[Points to note]
It is easy to lose it. I really don't know where it went. (Is it just me?)
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
I think the Timing I will use is when I change the Oil, so this is the area I would like to buy with it at that time.
Oil Disposal Box 4.5L Work GlovesQuantity:Set
https://www.webike.net/sd/21779950/
→Nitrile gloves are Quantities:The set is the main point. 4.5L is enough for 2-4 oil changes in Motorcycle.
Tear-resistant paper towel
https://www.webike.net/sd/24985573/
→Paper waste is definitely the way to go. I really recommend this one because it is tear resistant and can be used all the time.
View detail
Firm absorption
With the Scooter, it is hard to install directly under the Drain, but it absorbs waste oil well. View detail
Solid construction
The box itself is a reasonable Large size, so the Bolt may come out of the bag if you do not remove the Bolt after determining the target from the Drain.
The motorcycle is small and the amount of oil is only a little over 1 liter, so there is plenty of room in terms of capacity.
I like that it comes with a Fastener to hold the inner bag and Vinyl gloves to keep my hands clean. I have been using it for a long time now.
View detail
The box is small and nice! ★Small and nice!
The box is small and nice!
It is very easy to use because it can be slid directly under the Drain.
It also contains plenty of absorbent, making it a great oil replacement for SmallEngine Displacement VolumeMotorcycle.
Personalized Brake fluid replacement waste oil receiver (Extend Hose from Breeder and directly into the box) It is also useful for (^^)
View detail
It is best to create an Oil pool in the middle before use.
When Oil is allowed to fall naturally, more of it overflows through the surface than is sucked in. 。 It is a good idea to make an Oil reservoir in the middle. 。 According to the service manual, the amount of oil for Z125pro is 900cc, but if the oil is added while checking the gauge, 1000cc is the appropriate amount. (In fact, we had no problem even with half the 500cc.) When changing oil, flushing is done with cheap mineral oil at 1000 yen/L and running for about 15 minutes. (It can be rotated to high RPM) Then, we put in RACINGGrade Oil, which is our main product! 。 It is not surprising that it is cheaper than flushing oil. 。 So, we process 2L of waste oil at a time, so it is convenient for us to use! 。 The tightening Torque of the Drain is 28. View detail
I was having a hard time finding it for sale.
I use it for 1LOil cans of KAWSAKI.
I bought them in bulk because they are hard to find.
I had to go to the trouble of replacing it with Oil Jug because it does not come with it when you buy it on the Net, but from now on, the hassle will be eliminated.
View detail
It is inexpensive and full of cotton.
This is a necessity for Oil replacement.
It has been a long time since I bought this product, so I decided to do the Oil replacement myself.
It is inexpensive and has plenty of cotton, so CRF250L Oil (1.5L) Then, they sucked it up with room to spare.
Depending on each municipality, it can be conveniently disposed of as is.
View detail
I want it on from the beginning.
[How is it used?
Used for pouring Brake fluid.
How was your experience with it?
Pouring can be done without spilling.
In the case of a large scale, it is difficult to work without this product because the brake fluid is hard to pour.
If you want careful work, I would love to have it.
I would like to see it included with the product if possible.
View detail
It's easy
I used it to replace the Oil in today50. No problem. I thought the gloves were kind. View detail
Gloves are good.
Gloves included are pretty good, good price. View detail
if possible
I would like it to be attached by Service when I purchase Oil. View detail
Easy to use
Easy to use, feels a little pricey View detail
It can be used normally
Used to be in the Oil department. Feel free to bring your own." I used to have it in my office, but I don't see it anymore. If you don't have it, you can live without it, but if you do have it, it makes your work a little easier.
This was the first time I paid for this product, but I was able to work with it without any spillage of oil on the mouth of the can.
View detail